UNIFLUX V70

Alloy Digest ◽  
1978 ◽  
Vol 27 (6) ◽  
Keyword(s):  
Carbon Dioxide ◽  
Fracture Toughness ◽  
Tensile Strength ◽  
Carbon Steel ◽  
Heat Treating ◽  
Steel Weld ◽  
Electrode Wire ◽  
Steel Weld Metal ◽  
Welding Electrode ◽  
Metal Welding

Abstract Uniflux V70 is a continuous flux-cored welding electrode (wire) that is used to deposit carbon steel weld metal. Welding is protected by a shielding atmosphere of either 75% argon-25% carbon dioxide or 100% carbon dioxide. Uniflux V70 is used widely in shipbuilding and other fabricating industries to weld carbon steel and provides around 85,000 psi tensile strength and around 37 foot pounds Charpy V-notch impact at 0 F. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: CS-73. Producer or source: Unicore Inc., United Nuclear Corporation.

UNIFLUX 70

Alloy Digest ◽  
1978 ◽  
Vol 27 (9) ◽  
Keyword(s):  
Carbon Dioxide ◽  
Fracture Toughness ◽  
Tensile Strength ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Heat Treating ◽  
Shielding Gas ◽  
Electrode Wire ◽  
Welding Electrode

Abstract UNIFLUX 70 is a continuous flux-cored welding electrode (wire) for welding in carbon dioxide shielding gas in the flat groove and horizontal fillet positions. It is used widely in shipbuilding and other fabricating industries to weld carbon steel and provides around 82,000 psi tensile strength and around 50 foot-pounds Charpy V-notch impact at 0 F. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: CS-74. Producer or source: Unicore Inc., United Nuclear Corporation.

UNIFLUX VCM 225

Alloy Digest ◽  
1978 ◽  
Vol 27 (3) ◽  
Keyword(s):  
Carbon Dioxide ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Steel Weld ◽  
Electrode Wire ◽  
Molybdenum Steel ◽  
Welding Electrode

Abstract UNIFLUX VCM 225 is a continuous flux-cored welding electrode (wire) that is used to deposit 2-1/4% chromium-1% molybdenum steel weld when used to weld 2-1/4% chromium-1% molybdenum steel for which it was developed. Welding is protected by a shielding atmosphere of 100% carbon dioxide. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SA-344. Producer or source: Unicore Inc., United Nuclear Corporation.

AIRCO METAL-COR 6

Alloy Digest ◽  
1981 ◽  
Vol 30 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Strength ◽  
Heat Treating ◽  
Manganese Steel ◽  
Steel Weld ◽  
Shielding Gas ◽  
Metal Core ◽  
The Core ◽  
Steel Weld Metal ◽  
Welding Electrode

Abstract AIRCO METAL-COR 6 is a continuous tubular steel welding electrode with a powdered-metal core; gas shielding rather than slag is used to protect the core. It eliminates 50 to 70% of the smoke and fumes generated by self-shielded flux-cored electrodes and about 30% of the smoke from gas-shielded flux-cored electrodes. Metal-Core 6 is used to deposit typically 1.6 to 1.8% manganese steel weld metal that provides as-deposited tensile strength in the range 85,000 to 92,000 psi, depending on composition of the shielding gas. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SA-381. Producer or source: Airco Welding Products.

UNIFLUX VCM 125

Alloy Digest ◽  
1978 ◽  
Vol 27 (1) ◽  
Keyword(s):  
Carbon Dioxide ◽  
Fracture Toughness ◽  
Weld Metal ◽  
Heat Treating ◽  
Carbon Steels ◽  
Low Alloy Steels ◽  
Electrode Wire ◽  
Molybdenum Steel ◽  
Alloy Steels ◽  
Welding Electrode

Abstract UNIFLUX VCM 125 is a continuous flux-cored welding electrode (wire) that is used to deposit 1 1/4% chromium-1/2% molybdenum steel for which it was developed. Welding is protected by a shielding atmosphere of 100% carbon dioxide. This electrode also may be used to weld other low-alloy steels and carbon steels; however, the weld metal may differ somewhat from 1 1/4% chromium-1/2% molybdenum because of weld-metal dilution. When Uniflux VCM 125 is used to weld 1 1/4% chromium-1/2% molybdenum steel, it provides 95,000 psi tensile strength at 70 F and 24 foot-pounds Charpy V-notch impact at 40 F. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SA-340. Producer or source: Unicore Inc., United Nuclear Corporation.

UNIFLUX V100

Alloy Digest ◽  
1977 ◽  
Vol 26 (12) ◽  
Keyword(s):  
Weld Metal ◽  
Heat Treating ◽  
Carbon Steels ◽  
Low Alloy Steels ◽  
Steel Weld ◽  
Electrode Wire ◽  
Steel Weld Metal ◽  
Molybdenum Steel ◽  
Alloy Steels ◽  
Welding Electrode

Abstract UNIFLUX V100 is a continuous flux-cored welding electrode (wire) that is used to deposit 1/2% molybdenum steel weld metal when used to weld 1/2% molybdenum steel for which it was developed. Welding is protected by a shielding atmosphere of 75% argon-25% carbon dioxide. This electrode is also used to weld other low-alloy steels and carbon steels; however, the weld metal may differ somewhat from 1/2% molybdenum because of weld-metal dilution. Uniflux V100 is used widely in shipbuilding to weld 1/2% molybdenum steel. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SA-339. Producer or source: Unicore Inc., United Nuclear Corporation.

TUF-COR 1 WELDING ELECTRODE

Alloy Digest ◽  
1984 ◽  
Vol 33 (3) ◽  
Keyword(s):  
Carbon Dioxide ◽  
Heat Treating ◽  
General Purpose ◽  
Manganese Steel ◽  
Horizontal Position ◽  
Steel Weld ◽  
Shielding Gas ◽  
Electrode Diameter ◽  
Steel Weld Metal ◽  
Welding Electrode

Abstract TUF-COR 1 WELDING ELECTRODE was designed for general-purpose welding of mild steel. It can produce spatter-free, well-contoured welds in the horizontal position and in the flat position. Tuf-Cor 1 is specially formulated to produce spray-like metal transfer and multi-pass capabilities which allow the versatility of using one electrode diameter to weld many plate thicknesses that normally would require two or more diameters. It is used to deposit typically 1.55% manganese steel weld metal that is tough and has a tensile strength of typically 87,000 psi. The shielding gas is carbon dioxide. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on corrosion resistance as well as heat treating and machining. Filing Code: SA-399. Producer or source: Airco Welding Products.

UNIFLUX V90

Alloy Digest ◽  
1979 ◽  
Vol 28 (2) ◽  
Keyword(s):  
Carbon Dioxide ◽  
High Strength ◽  
Heat Treating ◽  
Carbon Steels ◽  
Low Alloy Steels ◽  
Nickel Steel ◽  
Steel Weld Metal ◽  
Alloy Steels ◽  
Temperature Impact ◽  
Welding Electrode

Abstract UNIFLUX V90 is a continuous flux-cored welding electrode (wire) developed to weld high-strength low-alloy steels, but it may be used to weld other low-alloy steels and carbon steels. It is used to deposit typically 2.40% nickel steel weld metal with good low-temperature impact properties. Welding is protected by a shielding atmosphere of either 75% argon-25% carbon dioxide or 100% carbon dioxide. Uniflux V90 is used widely in shipbuilding and other fabricating industries. It provides around 88,000 psi tensile strength and around 26 food-pounds Charpy V-notch impact at 60 F. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SA-355. Producer or source: Unicore Inc., United Nuclear Corporation.

VERTI-COR WELDING ELECTRODE

Alloy Digest ◽  
1982 ◽  
Vol 31 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Weld Metal ◽  
Physical Properties ◽  
Heat Treating ◽  
Manganese Steel ◽  
Steel Weld ◽  
Shielding Gas ◽  
Powdered Metal ◽  
Steel Weld Metal ◽  
Welding Electrode

Abstract VERTI-COR Welding Electrode is a continuous tubular steel welding electrode with a powdered-metal-and-flux core; gas shielding and slag are used to protect the molten electrode and weld metal. The VERTI-COR Welding Electrode is used for all-position welding and is a member of the FLUXCOR family of electrodes. It is used to deposit typically 1.6 to 1.9% manganese steel weld metal that is tough and has tensile strengths in the range 80,000 to 97,000 psi, depending on composition of the shielding gas. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SA-384. Producer or source: Airco Welding Products.

SAE 1025

Alloy Digest ◽  
1987 ◽  
Vol 36 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Carbon Steel ◽  
Heat Treating ◽  
Plain Carbon Steel ◽  
General Purpose ◽  
Pressure Vessels ◽  
Permanent Mold ◽  
Steel Mills ◽  
Cold Worked ◽  
Permanent Mold Castings

Abstract SAE 1025 is a plain carbon steel for general-purpose construction and engineering. It is used in the hot-worked, cold-worked, normalized or water-quenched-and-tempered condition. It also is carburized and used for case-hardened parts. Its many uses include bolts, forgings, axles, machinery components, cold-extruded parts, pressure vessels, case-hardened parts, chain and sprocket assemblies, spinning tools and permanent-mold castings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-114. Producer or source: Carbon steel mills.

SAE 1020

Alloy Digest ◽  
1987 ◽  
Vol 36 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Carbon Steel ◽  
Low Carbon Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Mills ◽  
Temperature Performance ◽  
Wide Range ◽  
Cold Worked

Abstract SAE 1020 is a low-carbon steel combining good machinability, workability and weldability. It is carburized for use in case-hardened components and it is used for a wide range of applications in the hot-worked, cold-worked, normalized or quenched-and-tempered conditions. Its many uses include bolts, rods, plate applications, machinery components, case-hardened parts, spinning tools and trimming dies. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low temperature performance and corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: CS-113. Producer or source: Carbon steel mills.

Sign in / Sign up

Export Citation Format

Share Document