ALLOY STEEL 5Ni-0.25Mo-0.05V

Alloy Digest ◽  
1984 ◽  
Vol 33 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Thick Section ◽  
Water Spray ◽  
Austenitizing Temperature ◽  
Steel Mills ◽  
Turbine Rotors

Abstract Alloy Steel 5Ni-0.25Mo-0.05V is highly suitable for massive components, usually more than four inches thick. It has only moderate hardenability but 5-inch to 80-inch rounds can be cooled from the austenitizing temperature in air or a water-spray quench to produce ferrite, bainite and martensite or ferrite and bainite. This steel is suitable for light and intermediate-duty generator and turbine rotors, large axles and shafts, large gears, ship forgings, and many other thick-section components. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-403. Producer or source: Alloy steel mills and foundries.

ALLOY STEEL 3.5Ni-0.25Mo-0.05V

Alloy Digest ◽  
1984 ◽  
Vol 33 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Water Spray ◽  
Austenitizing Temperature ◽  
Steel Mills ◽  
Turbine Rotors

Abstract Alloy Steel 3.5 Ni-0.25Mo-0.05V is highly suitable for massive components, usually more than four inches thick. It has only moderate hardenability but 5-inch to 80-inch rounds can be cooled from the austenitizing temperature in air or a water-spray quench to produce ferrite, bainite and martensite of ferrite and bainite. This steel is suitable for light and intermediate-duty generator and turbine rotors, large axles and shafts, large gears and ship forgings. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-400. Producer or source: Alloy steel mills and foundries.

AISI C1060

Alloy Digest ◽  
1969 ◽  
Vol 18 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Spring Steel ◽  
High Carbon ◽  
Steel Mills

Abstract AISI C1060 is a high-carbon water or oil hardening tool and spring steel recommended for heavy machinery parts, shafts, springs and miscellaneous tools requiring strength and wear resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: CS-32. Producer or source: Carbon and alloy steel mills.

AISI 5135

Alloy Digest ◽  
1976 ◽  
Vol 25 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Steel Mills

Abstract AISI 5135 is a low-alloy, through-hardening steel containing nominally 0.95% chromium. It is recommended for applications where medium hardenability, moderate strength and low-to-moderate toughness are sufficient. It may be used in the unhardened (annealed, as-rolled, or normalized) condition or after quenching in oil followed by tempering. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-323. Producer or source: Alloy steel mills and foundries.

SAE 4032

Alloy Digest ◽  
1975 ◽  
Vol 24 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Automobile Industry ◽  
Temper Embrittlement ◽  
Heat Treating ◽  
Steel Mills

Abstract SAE 4032 is an alloy steel used extensively in the automobile industry. It combines moderate strength with good toughness in the quenched and tempered condition because it is relatively free from temper embrittlement when tempered in the range 850-1100 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-319. Producer or source: Alloy steel mills and foundries.

NITRALLOY 125

Alloy Digest ◽  
1957 ◽  
Vol 6 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Low Temperatures ◽  
Heat Treating ◽  
Ammonia Gas ◽  
Steel Mills ◽  
Special Alloy

Abstract NITRALLOY 125 (0.20-0.30% C) is a special alloy steel which can be nitrided, that is, surface hardened, without final quenching, by the action of ammonia gas at relatively low temperatures. Nitralloy 125 is also known as Nitralloy H. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-61. Producer or source: Alloy steel mills and foundries.

ALLOY STEEL 1.8 Cu-1.0 Mn-1.2 Si

Alloy Digest ◽  
1976 ◽  
Vol 25 (10) ◽  
Keyword(s):  
Tensile Strength ◽  
Corrosion Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Cast Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Mills

Abstract Alloy Steel 1.8 Cu-1.0 Mn-1.2 Si is a low-carbon (0.20% max.) cast steel designed to provide intermediate tensile and yield strength. Copper lowers the ductility and toughness of cast steel but, for a given increase in tensile strength, the loss of ductility and toughness is less if copper is added than if carbon is increased. This steel has many uses such as booms, long shafting and gears. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SA-325. Producer or source: Alloy steel mills and foundries.

AISI 9260

Alloy Digest ◽  
1964 ◽  
Vol 13 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Spring Steel ◽  
Heavy Duty ◽  
Steel Mills ◽  
Machine Parts

Abstract AISI 9260 is an oil-hardening type of spring steel and tool steel recommended for repeated and severe impact service. It is also used for heavy duty, shock resistant machine parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-167. Producer or source: Alloy steel mills and foundries.

AISI 9255

Alloy Digest ◽  
1958 ◽  
Vol 7 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Tool Steel ◽  
Heat Treating ◽  
Steel Mills ◽  
Shock Resistance

Abstract AISI 9255 is a silico-manganese spring and tool steel having good toughness and shock resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-73. Producer or source: Alloy steel mills and foundries.

UNS H86170

Alloy Digest ◽  
1988 ◽  
Vol 37 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Low Carbon ◽  
Heavy Duty ◽  
Good Strength ◽  
Nickel Chromium ◽  
Steel Mills

Abstract UNS H-86170 is a low-carbon nickel-chromium-molybdenum carburizing steel of good hardenability. Its core is characterized by good strength and toughness. It is recommended for heavy-duty applications such as cams, chains, fasteners, gears, shafts and piston pins. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-435. Producer or source: Alloy steel mills and foundries.

SAE 1345

Alloy Digest ◽  
1987 ◽  
Vol 36 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Hand Tools ◽  
Manganese Alloy ◽  
Steel Mills ◽  
Wide Range

Abstract SAE 1345 is a through-hardening, manganese alloy steel with intermediate hardenability. It is most commonly used where good strength is needed but low-to-medium toughness is sufficient. Its wide range of uses in tools and machinery includes hand tools, gears, shafts, bolts and housings. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-425. Producer or source: Alloy steel mills and foundries.

Sign in / Sign up

Export Citation Format

Share Document