CARPENTER NIMARK 300

Alloy Digest ◽  
1987 ◽  
Vol 36 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
High Strength ◽  
Heat Treating ◽  
Pressure Vessels ◽  
Low Carbon ◽  
Temperature Performance ◽  
Nickel Cobalt ◽  
Low Temperature Aging ◽  
Temperature Aging

Abstract CARPENTER NIMARK 300 is a vacuum-melted, low-carbon nickel-cobalt-molybdenum maraging steel that develops yield strengths in excess of 270,000 psi (1862 MPa) by simple low-temperature aging at 900 F (482 C) following a solution anneal. It is readily weldable and exhibits good ductility at high strength levels and excellent notch ductility. Its many uses include aircraft structural assemblies, pressure vessels, shafting, bolts and fasteners, and rocket motor cases. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on low and high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SA-423. Producer or source: Carpenter.

CARPENTER MP35N ALLOY

Alloy Digest ◽  
1991 ◽  
Vol 40 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
High Temperature Oxidation ◽  
High Strength ◽  
Heat Treating ◽  
Cobalt Chromium ◽  
Temperature Oxidation ◽  
Temperature Performance ◽  
Nickel Cobalt ◽  
Cobalt Chromium Molybdenum

Abstract CARPENTER MP35N alloy is a nickel/cobalt/chromium/molybdenum alloy with ultra-high strength, good ductility and toughness. It is highly resistant to corrosion including sulfidation, high-temperature oxidation and hydrogen embrittlement. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness, creep, and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Co-82. Producer or source: Carpenter. Originally published October 1987, revised November 1991.

UNIMAR 250

Alloy Digest ◽  
1974 ◽  
Vol 23 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Gas Turbines ◽  
High Strength ◽  
Heat Treating ◽  
Pressure Vessels ◽  
Notch Toughness ◽  
Jet Engines ◽  
Temperature Performance

Abstract UNIMAR 250 is a maraging alloy steel having high strength, good notch toughness, excellent cryogenic properties and deep hardenability. It is recommended for pressure vessels, solid-fuel rocket cases and pressure bottles, landing-gear components, processing equipment operating in the temperature range of 300 to 600 F, and components for spacecraft, jet engines and gas turbines. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-304. Producer or source: Cyclops Corporation.

VASCOMAX T-250

Alloy Digest ◽  
1982 ◽  
Vol 31 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Strength ◽  
Corrosion Resistance ◽  
High Temperature ◽  
High Strength ◽  
Heat Treating ◽  
Pressure Vessels ◽  
Temperature Performance ◽  
Ultra High Strength Steel ◽  
Standard Grade

Abstract VascoMax T-250 is an ultra-high-strength steel that delivers the high strength (250 ksi tensile strength) and toughness of VascoMax 250 (Alloy Digest SA-142, March 1963). Yet VascoMax T-250 contains no cobalt and less molybdenum (both strategic elements) than the standard grade. In addition, the new grade provides higher ductility and toughness. VascoMax T-250 is recommended for aerospace structures, pressure vessels, shafting, bolts, and fasteners. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-387. Producer or source: Teledyne Vasco.

NIMARK 300

Alloy Digest ◽  
1970 ◽  
Vol 19 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Nickel Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Low Carbon ◽  
Temperature Performance

Abstract NIMARK 300 is a vacuum melted low carbon, 18% nickel alloy steel which attains yield strengths in excess of 270,000 psi. It is recommended for high strength, shock resisting applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-254. Producer or source: Carpenter.

PYROMET X-15

Alloy Digest ◽  
1970 ◽  
Vol 19 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Room Temperature ◽  
High Strength ◽  
Heat Treating ◽  
Notch Toughness ◽  
Low Carbon ◽  
Temperature Performance

Abstract PYROMET X-15 is a low-carbon, martensitic alloy which can be age hardened to give high strength with excellent ductility and notch toughness from room temperature to 1050 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-242. Producer or source: Carpenter.

REPUBLIC RSM-300

Alloy Digest ◽  
1969 ◽  
Vol 18 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Yield Strength ◽  
High Strength ◽  
Heat Treating ◽  
Age Hardening ◽  
Extrusion Dies ◽  
Temperature Performance ◽  
Nickel Cobalt

Abstract Republic RSM-300 alloy is an 18% nickel-cobalt-molybdenum age-hardening steel designed to develop up to 300,000 psi yield strength with good toughness. It is recommended for landing gears extrusion dies, rocket motor cases, high-strength bolts, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: SA-242. Producer or source: Republic Steel Corporation.

CARPENTER NIMARK 250

Alloy Digest ◽  
1986 ◽  
Vol 35 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Maraging Steel ◽  
Aging Treatment ◽  
Heat Treating ◽  
Low Carbon ◽  
Temperature Performance ◽  
Nickel Cobalt

Abstract CARPENTER NIMARK 250 is a vacuum-melted, low-carbon nickel-cobalt-molybdenum maraging steel in which yield strengths in excess of 240,000 psi can be developed by a simple aging treatment following a solution anneal. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SA-417. Producer or source: Carpenter.

DURANICKEL ALLOY 301

Alloy Digest ◽  
1963 ◽  
Vol 12 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Strength ◽  
Heat Treating ◽  
International Nickel Company ◽  
Temperature Performance

Abstract DURANICKEL Alloy 301 is a wrought, age-hardenable nickel alloy having high strength, high corrosion and heat resistance. It is recommended for springs, diaphrams, bearings, pump and valve parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-83. Producer or source: The International Nickel Company Inc..

DUCTALLOY

Alloy Digest ◽  
1956 ◽  
Vol 5 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
High Strength ◽  
Heat Treating ◽  
High Ductility ◽  
High Carbon ◽  
Brake Shoe ◽  
Temperature Performance ◽  
Ferrous Material

Abstract DUCTALLOY is a high-carbon ferrous material having high strength, high ductility, toughness and machinability. It is supplied in three grades: pearlitic grade 80, ferritic grade 60, and austenitic grade A50. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance as well as heat treating, machining, and joining. Filing Code: CI-14. Producer or source: American Brake Shoe Company.

BRUSH ALLOY 260-C

Alloy Digest ◽  
1968 ◽  
Vol 17 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy ◽  
Good Corrosion Resistance ◽  
Temperature Performance

Abstract Brush Alloy 260-C is a beryllium nickel casting alloy having high strength, hardness and good corrosion resistance. It is recommended for fuel pump impellers, turbines, non-sparking tools, molds for plastics and glass. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Ni-138. Producer or source: Brush Beryllium Company.

Sign in / Sign up

Export Citation Format

Share Document