THYSSEN STRIPPER MATERIAL

Alloy Digest ◽  
1993 ◽  
Vol 42 (8) ◽  
Keyword(s):  
Impact Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Heat Treating ◽  
High Impact ◽  
Plastic Molding ◽  
Mass Effects ◽  
High Impact Strength

Abstract THYSSEN STRIPPER MATERIAL is ideally suited for a stripper material for plastic molding applications of all kinds. It is supplied preheat treated to Rc 38/42 (352-388 BHN), and has a high impact strength with good temper resistance. Hardness loss due to mass effects is very low. This datasheet provides information on composition and physical properties. It also includes information on heat treating, machining, joining, and surface treatment. Filing Code: SA-466. Producer or source: Thyssen Specialty Steels Inc.

THYROPLAST 2311

Alloy Digest ◽  
1992 ◽  
Vol 41 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Impact Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Abrasion Resistance ◽  
Heat Treating ◽  
High Impact ◽  
Aisi P20 ◽  
High Impact Strength

Abstract Thyroplast 2311 tool steel is an AISI P20 modified grade, electric are melted and vacuum degassed, applicable to large plastic molds. It has good abrasion resistance and high impact strength This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-514. Producer or source: Thyssen Specialty Steels Inc.. See also Alloy Digest TS-525, April 1994.

SIMOCH

Alloy Digest ◽  
1966 ◽  
Vol 15 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Impact Strength ◽  
Cold Work ◽  
Heat Treating ◽  
High Impact ◽  
High Shock ◽  
Alloy Tool ◽  
High Impact Strength ◽  
Shock Resistance

Abstract SIMOCH is a low alloy tool steel having high shock resistance, high impact strength and excellent wear resistance. It is recommended for many hot work and cold work applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-186. Producer or source: Teledyne Vasco.

RMI 6Al-2Cb-1Ta-0.8Mo

Alloy Digest ◽  
1967 ◽  
Vol 16 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Impact Strength ◽  
Base Alloy ◽  
Heat Treating ◽  
High Impact ◽  
Good Corrosion Resistance ◽  
Deep Diving ◽  
High Impact Strength ◽  
Reactive Metals

Abstract RMI-6A1-2Cb-1Ta-0.8Mo is a titanium-base alloy recommended for parts requiring high impact strength along with good corrosion resistance, especially for deep diving under sea vehicles. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: Ti-53. Producer or source: Reactive Metals Inc..

THYROPLAST 2798

Alloy Digest ◽  
1994 ◽  
Vol 43 (7) ◽  
Keyword(s):  
Physical Properties ◽  
Surface Treatment ◽  
Tool Steel ◽  
Heat Treating ◽  
Electric Arc ◽  
High Impact

Abstract THYROPLAST 2798 is an electric arc melted, vacuum degassed P20 type tool steel which has high impact values for highly stressed mold frames and forging dies. This datasheet provides information on composition, physical properties, and hardness. It also includes information on heat treating, machining, joining, and surface treatment. Filing Code: TS-528. Producer or source: Thyssen Specialty Steels Inc.

Physical properties of biaxially oriented PA6 film for simultaneous stretching and sequential processing

2011 ◽  
Vol 31 (1) ◽  
Author(s):  
Masao Takashige ◽  
Toshitaka Kanai
Keyword(s):  
Impact Strength ◽  
Physical Properties ◽  
Physical Property ◽  
High Impact ◽  
Thermal Shrinkage ◽  
Double Bubble ◽  
Biaxial Stretching ◽  
High Impact Strength ◽  
The Difference ◽  
Stretching Process

Abstract There are two different stretching processes that produce the biaxially oriented film, namely the tenter process and double bubble tubular film process. Furthermore, there are two tenter processes, i.e., the sequential biaxial stretching process and simultaneous biaxial stretching process. There is no report describing the difference among film physical properties of the three different processes. The biaxially oriented polyamide film using the double bubble tubular process has good balanced physical property and high impact strength, thus it is used for proper applications utilizing their advantage properties. In this report, the influence of each biaxial stretching process on film physical properties of polyamide, which has hydrogen bond, was studied in detail. As a result, the tentering process film has anisotropic tensile properties between machine direction (MD) and transverse direction (TD). This result was influenced by a later stretching process, namely TD stretching. On the contrary, the double bubble tubular film has good balanced properties, especially thermal shrinkage and impact strength. Tentering simultaneous stretching film has much larger shrinkage in MD than in TD. The sequential stretching film has larger shrinkage in TD than in MD. The double bubble tubular film has high impact strength, because it corresponds to the balanced molecular orientation.

BERYLCO-10CR

Alloy Digest ◽  
1958 ◽  
Vol 7 (2) ◽  
Keyword(s):  
Thermal Conductivity ◽  
Impact Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Casting Alloy ◽  
High Ductility ◽  
Beryllium Copper ◽  
Endurance Strength

Abstract BERYLCO-10CR is a heat treatable, beryllium-copper casting alloy having high elastic and endurance strength, high ductility and impact strength, and high electrical and thermal conductivity. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting, heat treating, machining, joining, and surface treatment. Filing Code: Cu-59. Producer or source: Beryllium Corporation.

THYSSEN P20 SUPER

Alloy Digest ◽  
1994 ◽  
Vol 43 (2) ◽  
Keyword(s):  
Impact Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Heat Treating

Abstract THYSSEN P20 SUPER is a modified P20 with higher carbon and nickel to improve impact strength and temper resistance. This datasheet provides information on composition, physical properties, and hardness. It also includes information on heat treating, machining, and surface treatment. Filing Code: TS-523. Producer or source: Thyssen Specialty Steels Inc.

ALLEGHENY LUDLUM AL276

Alloy Digest ◽  
1996 ◽  
Vol 45 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Power Plant ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Chemical Plants ◽  
Temperature Performance

Abstract Allegheny Ludlum AL276 is widely used in the most severe environments found in chemical plants and in power plant desulfurization systems. The high molybdenum level with tungsten gives excellent pitting and crevice corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: Ni-497. Producer or source: Allegheny Ludlum Corporation.

NILO ALLOY 36

Alloy Digest ◽  
1987 ◽  
Vol 36 (8) ◽  
Keyword(s):  
Thermal Expansion ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Constant Coefficient ◽  
Coefficient Of Thermal Expansion ◽  
Heat Treating ◽  
Temperature Performance ◽  
Iron Nickel

Abstract NILO alloy 36 is a binary iron-nickel alloy having a very low and essentially constant coefficient of thermal expansion at atmospheric temperatures. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-79. Producer or source: Inco Alloys International Inc..

UNITEMP N-155

Alloy Digest ◽  
1971 ◽  
Vol 20 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Wide Temperature Range ◽  
Heat Treating ◽  
Combustion Chambers ◽  
Temperature Performance ◽  
Oxidation And Corrosion

Abstract UNITEMP N-155 is an iron-base austenitic alloy used over a wide temperature range from subzero to about 1800 or 1900 F. It has relatively good oxidation and corrosion resistance. It is used in such applications as turbine rotors, shafts and blades, afterburner parts, nozzles and combustion chambers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance as well as forming, heat treating, joining, and surface treatment. Filing Code: Fe-48. Producer or source: Cyclops Corporation.

Sign in / Sign up

Export Citation Format

Share Document