NAK 55

Alloy Digest ◽  
1994 ◽  
Vol 43 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Impact Resistance ◽  
High Strength ◽  
Heat Treating ◽  
Age Hardening ◽  
Clean Steel ◽  
Very High

Abstract NAK 55 is a very clean steel for use in plastic and rubber molds were impact resistance is not critical in design. Its age-hardening gives very high strength and good wear resistance. Tight tolerance are obtained with consistent expansion and contraction properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on heat treating, machining, and joining. Filing Code: SA-481. Producer or source: International Mold Steels.

DOMEX WEAR

Alloy Digest ◽  
2003 ◽  
Vol 52 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength Steel ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Wear Resistant ◽  
Very High

Abstract Domex Wear is a wear-resistant, very-high-strength steel that can be cold formed. It is used in the construction and mining industries. This datasheet provides information on composition, physical properties, hardness, tensile properties, and bend strength as well as fracture toughness. It also includes information on wear resistance as well as heat treating and joining. Filing Code: CS-135. Producer or source: SSAB Swedish Steel Inc.

AIRSTEEL X-200

Alloy Digest ◽  
1959 ◽  
Vol 8 (6) ◽  
Keyword(s):  
United States ◽  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
United States Steel Corporation ◽  
Temperature Performance ◽  
Very High

Abstract USS AIRSTEEL X-200 is a very high strength, workable, air hardening steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SA-85. Producer or source: United States Steel Corporation.

DOMEX 110XF

Alloy Digest ◽  
2003 ◽  
Vol 52 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength Steel ◽  
Civil Engineering ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Structural Components ◽  
Very High

Abstract Domex 110XF is a very-high-strength steel that is used for automotive and civil engineering structural components. This datasheet provides information on composition, physical properties, hardness, tensile properties, and bend strength as well as fracture toughness. It also includes information on heat treating and joining. Filing Code: SA-512. Producer or source: SSAB Swedish Steel Inc.

NICKELVAC 925 ALLOY

Alloy Digest ◽  
2003 ◽  
Vol 52 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Age Hardening ◽  
Excellent Corrosion Resistance

Abstract Nickelvac 925 is an alloy similar to alloy 825 (N08825), but with the age-hardening constituents of titanium and aluminum to achieve high strength while maintaining excellent corrosion resistance. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-601. Producer or source: Allvac Metals Company.

RUUKKI OPTIM 900 QC

Alloy Digest ◽  
2014 ◽  
Vol 63 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Bend Radius ◽  
Minimum Yield

Abstract Optim 900 QC (896 MPa minimum yield strength) is a quenched (Q), cold formable (C) steel that exceeds most other materials with the tightest bend radius. The Optim family of alloys offers high strength and good workshop properties. This datasheet provides information on composition, physical properties, microstructure, tensile properties, and bend strength as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, and joining. Filing Code: CS-180. Producer or source: Rautaruukki Corporation.

LO-AIR

Alloy Digest ◽  
1964 ◽  
Vol 13 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Heavy Duty ◽  
High Carbon

Abstract Lo-Air is a high-carbon alloy steel having air hardening characteristics. It is a deep hardening steel producing a combination of high strength, toughness and wear resistance. It is recommended for precision tools and heavy duty blanking and forming dies. This datasheet provides information on composition, physical properties, hardness, tensile properties, and bend strength as well as fracture toughness and fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-154. Producer or source: Cyclops Corporation.

RUUKKI OPTIM 1100 QC

Alloy Digest ◽  
2014 ◽  
Vol 63 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Bend Radius ◽  
Minimum Yield

Abstract Optim 1100 QC (1100 MPa minimum yield strength) is a quenched (Q), cold formable (C) steel that exceeds most other materials with the tightest bend radius. The Optim family of alloys offers high strength and good workshop properties. This datasheet provides information on composition, physical properties, microstructure, hardness, tensile properties, and bend strength as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, and joining. Filing Code: CS-183. Producer or source: Rautaruukki Corporation.

UNS T30106

Alloy Digest ◽  
1988 ◽  
Vol 37 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
High Carbon ◽  
Steel Mills

Abstract UNS No. T30106 is an air-hardening high-carbon tool steel designed for a combination of high strength, good wear resistance, and good toughness. It is easy to heat treat with a minimum of distortion and is used extensively for plastic molds. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fracture toughness and fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-489. Producer or source: Tool steel mills.

DOMEX 100XF

Alloy Digest ◽  
2003 ◽  
Vol 52 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength Steel ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Very High

Abstract Domex 100XF is a very-high-strength steel that can be cold formed. It finds use in the construction and mining industries. This datasheet provides information on composition, physical properties, hardness, tensile properties, and bend strength as well as fracture toughness. It also includes information on heat treating and joining. Filing Code: SA-523. Producer or source: SSAB Swedish Steel Inc.

DOMEX 80W

Alloy Digest ◽  
2003 ◽  
Vol 52 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength Steel ◽  
Civil Engineering ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Structural Components ◽  
Very High

Abstract Domex 80W is a weather resistant very high-strength steel that is used for civil engineering structural components. This datasheet provides information on composition, physical properties, tensile properties, and bend strength as well as fracture toughness. It also includes information on heat treating and joining. Filing Code: SA-511. Producer or source: SSAB Swedish Steel Inc.

Sign in / Sign up

Export Citation Format

Share Document