V&M T23

Alloy Digest ◽  
2001 ◽  
Vol 50 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Power Plant ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Operating Parameters ◽  
Power Plant Boiler ◽  
Plant Boiler

Abstract Vallourec and Mannesmann (V and M) Tubes T23 is a power plant boiler tubing alloy developed to resist increasing operating parameters of pressure and temperature. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on forming, heat treating, and joining. Filing Code: SA-507. Producer or source: Vallourec & Mannesmann.

V&M T24

Alloy Digest ◽  
2001 ◽  
Vol 50 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Power Plant ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Operating Parameters ◽  
Power Plant Boiler ◽  
Plant Boiler

Abstract Vallourec and Mannesmann Tubes alloy T24 is a development in power-plant boiler-tubing alloys. It was developed to resist increasing operating parameters of pressure and temperature, particularly in ultra-super-critical boilers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: SA-508. Producer or source: Vallourec & Mannesmann.

DUREHETE 900

Alloy Digest ◽  
2004 ◽  
Vol 53 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Power Plant ◽  
Physical Properties ◽  
Steam Turbine ◽  
Tensile Properties ◽  
High Strength Steel ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance

Abstract Durehete 900 is a high-strength steel bolting material often used in steam turbine and other power-plant applications. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance as well as heat treating. Filing Code: SA-138. Producer or source: Corus. Originally published December 1962, revised September 2004.

ALLEGHENY LUDLUM AL276

Alloy Digest ◽  
1996 ◽  
Vol 45 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Power Plant ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Chemical Plants ◽  
Temperature Performance

Abstract Allegheny Ludlum AL276 is widely used in the most severe environments found in chemical plants and in power plant desulfurization systems. The high molybdenum level with tungsten gives excellent pitting and crevice corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: Ni-497. Producer or source: Allegheny Ludlum Corporation.

INCONEL ALLOY 725

Alloy Digest ◽  
1994 ◽  
Vol 43 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Inconel Alloy ◽  
Alloy 625

Abstract INCONEL ALLOY 725 is an age-hardenable alloy that displays high strength along with excellent ductility and toughness. Its corrosion resistance is comparable to alloy 625. Good flattening properties are exhibited in age-hardened tubing. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating and machining. Filing Code: Ni-445. Producer or source: Inco Alloys International Inc.

MONEL ALLOY R-405

Alloy Digest ◽  
1963 ◽  
Vol 12 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Nickel Copper

Abstract MONEL alloy R-405 is a machining grade of nickel-copper alloy that combines toughness, strength and corrosion resistance of MONEL alloy 400 with excellent machinability. The alloy is designed especially for use in automatic screw machines. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-79. Producer or source: Huntington Alloy Products Division.

COPPER ALLOY No. C93500

Alloy Digest ◽  
1982 ◽  
Vol 31 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Corrosion Resistant ◽  
Low Strength

Abstract Copper Alloy No. C93500 is a cast bronze containing nominally 9% lead and 5% tin. It has excellent machinability, low strength and good resistance to corrosion. It is used for corrosion-resistant castings, small bearings and bushings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-439. Producer or source: Copper alloy foundries.

MEEHANITE GF-20

Alloy Digest ◽  
1973 ◽  
Vol 22 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Cast Iron ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Gray Cast Iron ◽  
Heat Treating ◽  
Gray Cast

Abstract MEEHANITE GF-20 is a gray cast iron designed principally for high machinability and is used where strength is not an important factor. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: CI-39. Producer or source: Meehanite Metal Corporation.

DUCTLIRON

Alloy Digest ◽  
1964 ◽  
Vol 13 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
High Ductility ◽  
High Carbon ◽  
Ferrous Material

Abstract DUCTLIRON is a high-carbon ferrous material containing graphite in the form of nodules or spheroids. It possesses unusually high ductility, strength and castability. It is furnished in three different grades, namely, SF-60, SP-80 and SH-100. Alloyed grades are also available under different designations as AQS-HS and WS. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on casting, heat treating, machining, and joining. Filing Code: CI-33. Producer or source: Rosedale Foundry.

MEEHANITE GD

Alloy Digest ◽  
1964 ◽  
Vol 13 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Shear Strength ◽  
Cast Iron ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Damping Capacity ◽  
Iron And Steel ◽  
Lubricating Properties

Abstract MEEHANITE-GD is a high strength iron casting having high damping capacity, self-lubricating properties, and good machinability. It combines the good properties of both cast iron and steel. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on casting, heat treating, machining, and joining. Filing Code: CI-32. Producer or source: Meehanite Metal Corporation.

BELMALLOY

Alloy Digest ◽  
1954 ◽  
Vol 3 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
High Grade ◽  
Malleable Iron ◽  
Shock Resistance ◽  
High Torque

Abstract BELMALLOY is a high grade pearlitic malleable iron providing rigidity and shock resistance to high torque loads. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on heat treating, machining, and joining. Filing Code: CI-6. Producer or source: Belle City Malleable Iron Company.

Sign in / Sign up

Export Citation Format

Share Document