CARPENTER STAINLESS No. 7-Mo

Alloy Digest ◽  
1974 ◽  
Vol 23 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Exchangers ◽  
Heat Treating ◽  
General Corrosion ◽  
Annealed Condition ◽  
Two Phase ◽  
Temperature Performance ◽  
Resistance To Stress

Abstract CARPENTER STAINLESS No. 7-Mo is a two-phase alloy consisting of a ferritic matrix with pools of austenite. It has high resistance to stress-corrosion cracking and pitting, and good general corrosion resistance in many environments. Its principal use is for tubing and pipe in heat exchangers involving corrosive conditions. It is normally used in the annealed condition for maximum corrosion resistance and ductility. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-298. Producer or source: Carpenter.

SANDVIK SAF 2205

Alloy Digest ◽  
1987 ◽  
Vol 36 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Treating ◽  
General Corrosion ◽  
Low Carbon ◽  
Temperature Performance ◽  
Resistance To Stress ◽  
Saf 2205

Abstract SANDVIK SAF 2205 is an extra-low carbon, ferritic-austenitic stainless steel. It has high resistance to stress-corrosion cracking; pitting; service and general corrosion. It has roughly twice the yield strength of austenitic stainless grades and it has good weldability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-487. Producer or source: Sandvik.

COPPER ALLOY No. 220

Alloy Digest ◽  
1972 ◽  
Vol 21 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Copper Alloy ◽  
Heat Treating ◽  
Zinc Alloy ◽  
Temperature Performance ◽  
Copper Zinc ◽  
Resistance To Stress

Abstract COPPER ALLOY No. 220, previously called Commercial Bronze, 90%, is a copper-zinc alloy having good formability and resistance to stress-corrosion cracking. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-254. Producer or source: Brass mills.

USS 18-18-2 STAINLESS STEEL

Alloy Digest ◽  
1971 ◽  
Vol 20 (4) ◽  
Keyword(s):  
United States ◽  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Treating ◽  
United States Steel Corporation ◽  
Temperature Performance ◽  
Aqueous Chloride ◽  
Resistance To Stress

Abstract USS 18-18-2 Stainless Steel (18% chromium-18% nickel-2% silicon) was developed specifically for superior resistance to stress-corrosion cracking in hot aqueous chloride solutions. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-253. Producer or source: United States Steel Corporation.

BOEHLER A965

Alloy Digest ◽  
2007 ◽  
Vol 56 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Stress Corrosion Cracking ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Temperature Performance ◽  
Resistance To Stress ◽  
Specialty Metals

Abstract Boehler A965 is a superaustenitic Cr-Ni-Mo stainless steel with excellent resistance to stress-corrosion cracking, pitting, and crevice corrosion. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-994. Producer or source: Böhler-Uddeholm Specialty Metals Inc.

AVESTA 654 SMO

Alloy Digest ◽  
1993 ◽  
Vol 42 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
General Corrosion ◽  
Halide Ions ◽  
Temperature Performance ◽  
Very High

Abstract AVESTA 654 SMO is an austenitic stainless steel which due to its high content of molybdenum and nitrogen possesses excellent resistance to pitting and crevice corrosion. It also has very high resistance to general corrosion in acids, especially those containing halide ions. Furthermore, its mechanical strength is high in comparison with conventional austenitic grades. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-552. Producer or source: Avesta Sheffield Inc.

SANDVIK 3RE60

Alloy Digest ◽  
1972 ◽  
Vol 21 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
High Resistance ◽  
Heat Treating ◽  
Low Carbon ◽  
Duplex Structure ◽  
Temperature Performance ◽  
Resistance To Stress

Abstract SANDVIK 3RE60 is an extra-low-carbon stainless steel with a duplex structure consisting of ferrite and austenite. It has high resistance to stress-corrosion cracking, good formability and good weldability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-276. Producer or source: Sandvik.

ALLMETAL ASP-11

Alloy Digest ◽  
1976 ◽  
Vol 25 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Treating ◽  
Corrosion And Wear ◽  
Unique Combination ◽  
Annealed Condition ◽  
Temperature Performance ◽  
Wide Range

Abstract ALLMETAL ASP-11 is a stainless steel containing 70% ferrite and 30% austenite in its standard (annealed) condition. It has a unique combination of tensile and fatigue strengths, weldability, and resistance to corrosion and wear. This combination of properties makes it suitable for a wide range of applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-328. Producer or source: Allmetal Screw Products Company Inc..

CARPENTER STAINLESS TYPE 302

Alloy Digest ◽  
1984 ◽  
Vol 33 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Salt Water ◽  
Heat Treating ◽  
Annealed Condition ◽  
Temperature Performance

Abstract CARPENTER STAINLESS TYPE 302 is one of the most widely used of the chromium-nickel stainless and heat-resisting steels. In the annealed condition it is austenitic, non-magnetic, extremely tough and ductile and it has excellent resistance to corrosion. Among its many uses are springs, woven screens, cables, salt-water fishing tackle, thermometers and camera parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-443. Producer or source: Carpenter.

ALTEMP HX

Alloy Digest ◽  
1993 ◽  
Vol 42 (10) ◽  
Keyword(s):  
Heat Treatment ◽  
Solid Solution ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Base Alloy ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Temperature Performance ◽  
Nickel Base

Abstract ALTEMP HX is an austenitic nickel-base alloy designed for outstanding oxidation and strength at high temperatures. The alloy is solid-solution strengthened. Applications include uses in the aerospace, heat treatment and petrochemical markets. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ni-442. Producer or source: Allegheny Ludlum Corporation.

UNITEMP N-155

Alloy Digest ◽  
1971 ◽  
Vol 20 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Wide Temperature Range ◽  
Heat Treating ◽  
Combustion Chambers ◽  
Temperature Performance ◽  
Oxidation And Corrosion

Abstract UNITEMP N-155 is an iron-base austenitic alloy used over a wide temperature range from subzero to about 1800 or 1900 F. It has relatively good oxidation and corrosion resistance. It is used in such applications as turbine rotors, shafts and blades, afterburner parts, nozzles and combustion chambers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance as well as forming, heat treating, joining, and surface treatment. Filing Code: Fe-48. Producer or source: Cyclops Corporation.

Sign in / Sign up

Export Citation Format

Share Document