RA 446

Alloy Digest ◽  
1980 ◽  
Vol 29 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Elevated Temperature ◽  
Hot Corrosion ◽  
Heat Treating ◽  
Combustion Chambers ◽  
Elevated Temperature Strength ◽  
High Chromium ◽  
Temperature Performance ◽  
Resistance To Oxidation

Abstract RA 446 is a high-chromium ferritic heat-resisting alloy with excellent resistance to oxidation and to various forms of hot corrosion. The alloy is used most commonly for service between 1500 and 2200 F (815 and 1200 C), although its elevated-temperature strength is quite low. Among its many applications are recuperators, combustion chambers, kiln linings, stack dampers and oil-burner components. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-375. Producer or source: Rolled Alloys Inc..

ALUMINUM 224.0

Alloy Digest ◽  
1970 ◽  
Vol 19 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Elevated Temperature ◽  
Heat Treating ◽  
Aluminum Casting ◽  
Elevated Temperature Strength ◽  
Casting Alloys ◽  
Temperature Performance ◽  
Aluminum Company

Abstract ALUMINUM 224.0 was developed for the production of sand and composite mold castings which will meet substantially higher elevated temperature strength requirements than other aluminum casting alloys. This datasheet provides information on composition, physical properties, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-200. Producer or source: Aluminum Company of America.

AISI TYPE 446

Alloy Digest ◽  
1982 ◽  
Vol 31 (5) ◽  
Keyword(s):  
Stainless Steel ◽  
Heat Treating ◽  
Combustion Chambers ◽  
Elevated Temperature Strength ◽  
High Chromium ◽  
Heat Resistant Alloy ◽  
Steel Mills ◽  
Temperature Performance ◽  
Aisi Type ◽  
Resistance To Oxidation

Abstract AISI Type 446 is a high-chromium (nominally 25%), ferritic, heat-resistant alloy with excellent resistance to oxidation and to various forms of hot corrosion. The alloy is used most commonly for service between 1500 and 2200 F (815 and 1200 C), although its elevated-temperature strength is quite low. Among its many applications are combustion chambers, kiln linings, oil-burner components and annealing boxes. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-407. Producer or source: Stainless steel mills.

SANDVIK 353 MA

Alloy Digest ◽  
2001 ◽  
Vol 50 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Rare Earth ◽  
High Temperature ◽  
Elevated Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Rare Earth Metals ◽  
Heat Treating ◽  
Elevated Temperature Strength ◽  
Temperature Performance

Abstract Sandvik 353 MA is an austenitic high-temperature grade with nitrogen and rare earth metals (REM) that produce good elevated temperature strength combined with oxidation and carburization resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming and heat treating. Filing Code: SS-817. Producer or source: Sandvik.

DMV 310 N

Alloy Digest ◽  
2009 ◽  
Vol 58 (1) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Elevated Temperature ◽  
Austenitic Stainless Steel ◽  
Creep Resistance ◽  
Heat Treating ◽  
Elevated Temperature Strength ◽  
Temperature Performance ◽  
Special Modification

Abstract DMV 310 N is a special modification of 310, an austenitic stainless steel, by additions of both nitrogen and niobium. This addition results in increased elevated-temperature strength and creep resistance. The alloy has potential in advanced boilers with high steam temperatures. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1027. Producer or source: Mannesmann DMV Stainless USA Inc.

UNITEMP N-155

Alloy Digest ◽  
1971 ◽  
Vol 20 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Wide Temperature Range ◽  
Heat Treating ◽  
Combustion Chambers ◽  
Temperature Performance ◽  
Oxidation And Corrosion

Abstract UNITEMP N-155 is an iron-base austenitic alloy used over a wide temperature range from subzero to about 1800 or 1900 F. It has relatively good oxidation and corrosion resistance. It is used in such applications as turbine rotors, shafts and blades, afterburner parts, nozzles and combustion chambers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance as well as forming, heat treating, joining, and surface treatment. Filing Code: Fe-48. Producer or source: Cyclops Corporation.

INCONEL ALLOY N06230

Alloy Digest ◽  
2009 ◽  
Vol 58 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Inconel Alloy ◽  
Temperature Performance ◽  
Resistance To Oxidation

Abstract Inconel Alloy N06230 is a Ni-Cr-W alloy with excellent strength and resistance to oxidation at elevated temperatures. This alloy offers good metallurgical stability and is readily fabricated by conventional processes and procedures. This datasheet provides information on composition, physical properties, microstructure, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-667. Producer or source: Special Metals Corporation.

ROLLED ALLOYS HR-120

Alloy Digest ◽  
2000 ◽  
Vol 49 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Oxidation Resistance ◽  
Thermal Processing ◽  
Hot Corrosion ◽  
Heat Treating ◽  
Temperature Performance

Abstract HR-120 alloy is an alloy designed for thermal processing. It possesses excellent strength, oxidizing hot corrosion resistance, good carburization resistance, and oxidation resistance through 1093 deg C (2000 deg F). This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: Ni-561. Producer or source: Rolled Alloys.

NICROFER 3033

Alloy Digest ◽  
2004 ◽  
Vol 53 (2) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
High Chromium ◽  
Temperature Performance ◽  
Mineral Acids ◽  
Mixed Acids

Abstract Nicrofer 3033 is a high-chromium austenitic material for service in hot mineral acids and mixed acids. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-508. Producer or source: VDM Technologies Corporation. Originally published April 1996, revised February 2004. See also Alloy Digest SS-687, July 1997.

NIROSTA 4465

Alloy Digest ◽  
2000 ◽  
Vol 49 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Intergranular Corrosion ◽  
Phosphate Rock ◽  
Heat Treating ◽  
Chromium Alloy ◽  
Low Carbon ◽  
High Chromium ◽  
Temperature Performance

Abstract Nirosta 4465 is a low-carbon, high-chromium alloy with nickel and molybdenum. It has good corrosion and intergranular corrosion resistance. The alloy is used for processing phosphate rock. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-797. Producer or source: ThyssenKrupp Nirosta.

J&L TYPE 309

Alloy Digest ◽  
2003 ◽  
Vol 52 (12) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Elevated Temperature ◽  
Physical Properties ◽  
Heat Treating ◽  
Good Combination ◽  
Resistance To Oxidation ◽  
Cold Worked ◽  
Specialty Steel

Abstract Type 309 (UNS S30900) is an austenitic chromium-nickel stainless steel widely used for elevated-temperature services. It has a good combination of oxidation resistance and corrosion-resisting properties. The alloy is essentially nonmagnetic when annealed and become slightly magnetic when cold worked. It is intended primarily for high-temperature applications at 816 deg C (1500 deg F) or higher where resistance to oxidation and/or corrosion is required. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-896. Producer or source: J & L Specialty Steel Inc.

Sign in / Sign up

Export Citation Format

Share Document