CF8C-PLUS

Alloy Digest ◽  
2008 ◽  
Vol 57 (1) ◽  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Tensile Properties ◽  
High Temperatures

Abstract CF8C-Plus is an austenitic casting grade similar to CF8C, but with improved chemistry to stay fully austenitic at high temperatures and thus retain good mechanical properties. This datasheet provides information on composition, microstructureand tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on casting and joining. Filing Code: SS-1006. Producer or source: Caterpillar Technical Center.

NICKEL 200

Alloy Digest ◽  
1962 ◽  
Vol 11 (10) ◽  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Temperatures ◽  
Heat Treating ◽  
Temperature Performance ◽  
Nickel 200

Abstract Nickel-200 is a wrought metal combining excellent mechanical properties with corrosion resistance. It retains its strength to an excellent degree at high temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-75. Producer or source: Huntington Alloy Products Division.

SUPERSTON 40

Alloy Digest ◽  
1965 ◽  
Vol 14 (4) ◽  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Aluminum Bronze

Abstract SUPERSTON 40 is an aluminum bronze containing 12% manganese and has good casting properties and excellent mechanical properties. It is recommended for any application where extreme corrosion resistance is required and where weldability is desired, such as propellers and marine equipment. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness, creep, and fatigue. It also includes information on corrosion resistance as well as casting, forming, heat treating, and machining. Filing Code: Cu-150. Producer or source: H. Kramer & Company.

VIRGO 17.4 PH

Alloy Digest ◽  
2013 ◽  
Vol 62 (5) ◽  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Precipitation Hardening ◽  
Heat Treating

Abstract Virgo 17.4 PH is a 17Cr-4Ni-3Cu-0.3% Cb alloy that is precipitation hardening. It is martensitic and combines high mechanical properties with corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-1145. Producer or source: Industeel USA, LLC.

NITRODUR 8524

Alloy Digest ◽  
2017 ◽  
Vol 66 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Fatigue Strength ◽  
Tensile Properties ◽  
High Temperatures ◽  
High Surface ◽  
Surface Hardness ◽  
Operating Temperatures

Abstract NITRODUR 8524 (8CrMo16, 1.8524) is one of the Nitrodur family of nitriding steels that are used where high surface hardness and good fatigue strength are required and the material is also subjected to high temperatures. Nitrided surfaces maintain their hardness and strength at operating temperatures of up to approximately 500–550 deg C (932–1022 deg F). This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on surface qualities as well as casting and forming. Filing Code: SA-807. Producer or source: Schmolz + Bickenbach Group.

Structure Assessment Using Instrumented Indentation: Strength, Toughness and Residual Stress

2018 ◽  
Author(s):  
Dongil Kwon ◽  
Jong Hyoung Kim ◽  
Ohmin Kwon ◽  
Woojoo Kim ◽  
Sungki Choi ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Residual Stress ◽  
Tensile Properties ◽  
Hole Drilling ◽  
Uniaxial Tensile ◽  
Small Scale ◽  
Specimen Preparation ◽  
Instrumented Indentation ◽  
Uniaxial Tensile Testing

The instrumented indentation technique (IIT) is a novel method for evaluating mechanical properties such as tensile properties, toughness and residual stress by analyzing the indentation load-depth curve measured during indentation. It can be applied directly on small-scale and localized sections in industrial structures and structural components since specimen preparation is very easy and the experimental procedure is nondestructive. We introduce the principles for measuring mechanical properties with IIT: tensile properties by using a representative stress and strain approach, residual stress by analyzing the stress-free and stressed-state indentation curves, and fracture toughness of metals based on a ductile or brittle model according to the fracture behavior of the material. The experimental results from IIT were verified by comparing results from conventional methods such as uniaxial tensile testing for tensile properties, mechanical saw-cutting and hole-drilling methods for residual stress, and CTOD test for fracture toughness.

FERRALIUM 255-SD50

Alloy Digest ◽  
2013 ◽  
Vol 62 (1) ◽  
Keyword(s):  
Mechanical Properties ◽  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Unique Combination ◽  
Superduplex Stainless Steel

Abstract Ferralium 255-SD50 has much higher strength than other commercially available superduplex alloys. Ferralium 255 is the original superduplex stainless steel, noted for its unique combination of mechanical properties and resistance to corrosion, erosion, and cavitation. It has especially low impurities giving improved corrosion resistance, and it is used extensively in the offshore and chemical industries. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on forming and machining. Filing Code: SS-1133. Producer or source: Langley Alloys.

NITRODUR 8522

Alloy Digest ◽  
2017 ◽  
Vol 66 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Fatigue Strength ◽  
Tensile Properties ◽  
High Temperatures ◽  
High Surface ◽  
Surface Hardness ◽  
Operating Temperatures

Abstract NITRODUR 8522 (33CrMoV12-9, 1.8522) is one of the Nitrodur family of nitriding steels that are used where high surface hardness and good fatigue strength are required and the material is also subjected to high temperatures. Nitrided surfaces maintain their hardness and strength at operating temperatures of up to approximately 500–550 deg C (932–1022 deg F). This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on surface qualities as well as casting and forming. Filing Code: SA-802. Producer or source: Schmolz + Bickenbach Group.

NITRODUR 8515

Alloy Digest ◽  
2017 ◽  
Vol 66 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Fatigue Strength ◽  
Tensile Properties ◽  
High Temperatures ◽  
High Surface ◽  
Surface Hardness ◽  
Operating Temperatures

Abstract NITRODUR 8515 (31CrMo12, 1.8515) is one of the Nitrodur family of nitriding steels that are used where high surface hardness and good fatigue strength are required and the material is also subjected to high temperatures. Nitrided surfaces maintain their hardness and strength at operating temperatures of up to approximately 500-550 deg C (932-1022 deg F). This datasheet provides information on composition and tensile properties as well as fracture toughness. It also includes information on surface qualities as well as casting. Filing Code: SA-785. Producer or source: Schmolz + Bickenbach Group.

3Cr-1Mo-1/4V-Ti-B

Alloy Digest ◽  
1994 ◽  
Vol 43 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Tensile Properties ◽  
High Temperatures ◽  
Heat Treating ◽  
Coal Liquefaction ◽  
Thick Section ◽  
Reactor Materials

Abstract The 3Cr-1Mo-1/4V-Ti-B alloy was developed ato meet requirements for coal liquefaction reactor materials. The alloy is hydrogen resistant at high temperatures and pressures with excellent properties in thick section sizes and at high temperatures. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness and creep. It also includes information on heat treating and joining. Filing Code: SA-479. Producer or source: Sumikin Welding Industry.

Sign in / Sign up

Export Citation Format

Share Document