Ti-8Mo-8V-2Fe-3Al

Alloy Digest ◽  
1973 ◽  
Vol 22 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Titanium Alloy ◽  
High Temperature ◽  
High Strength ◽  
Heat Treating ◽  
Beta Titanium Alloy ◽  
Temperature Performance ◽  
Beta Titanium ◽  
Metastable Beta

Abstract Ti-8Mo-8V-2Fe-3A1 is a metastable beta titanium alloy that can be age hardened to high-strength levels. Aging in the range of 800-1200 F partially transforms beta to alpha to produce the high strength. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-68. Producer or source: Titanium Metals Corporation of America.

ALLVAC 6Al-4V

Alloy Digest ◽  
1992 ◽  
Vol 41 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Titanium Alloy ◽  
High Temperature ◽  
High Strength ◽  
Heat Treating ◽  
Beta Titanium Alloy ◽  
Temperature Performance ◽  
Beta Titanium ◽  
Wide Range ◽  
Alpha Beta

Abstract ALL VAC 6A1-4V is an alpha/beta titanium alloy. It is the most widely used of the titanium alloys. It is age hardenable and it develops high strength. It can be used over a wide range of temperatures from cryogenic to about 800 F (427 C). This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-99. Producer or source: Allvac Ltd.

HYLITE 45

Alloy Digest ◽  
1963 ◽  
Vol 12 (11) ◽  
Keyword(s):  
Heat Treatment ◽  
Corrosion Resistance ◽  
Titanium Alloy ◽  
High Temperature ◽  
High Strength ◽  
Heat Treating ◽  
Beta Titanium Alloy ◽  
Temperature Performance ◽  
Beta Titanium ◽  
Alpha Beta

Abstract Hylite 45 is an alpha-beta titanium alloy that responds to a heat treatment for hardening and strengthening. It is recommended for forgings, etc., where a high strength is required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep and fatigue. It also includes information on high temperature performance and corrosion resistance as well as heat treating, machining, and joining. Filing Code: Ti-37. Producer or source: Jessop-Saville Ltd, Brightside Works.

HYLITE 50

Alloy Digest ◽  
1967 ◽  
Vol 16 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Titanium Alloy ◽  
Heat Treating ◽  
Compressor Blade ◽  
Beta Titanium Alloy ◽  
Creep Properties ◽  
Temperature Performance ◽  
Beta Titanium ◽  
Disc Material

Abstract HYLITE 50 is a complex alpha plus beta titanium alloy developed as a compressor blade and disc material, recommended for the highest duty service. It has high tensile and creep properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-51. Producer or source: Jessop-Saville Ltd, Brightside Works.

MST 5Al-2.5 Sn

Alloy Digest ◽  
1959 ◽  
Vol 8 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Titanium Alloy ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Elevated Temperatures ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance

Abstract MST 5A1-2.5 Sn is a titanium alloy combining good weldability and high strength at elevated temperatures. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-21. Producer or source: Mallory-Sharon Metals Company.

CARPENTER TITANIUM 6-6-2

Alloy Digest ◽  
1971 ◽  
Vol 20 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Titanium Alloy ◽  
Physical Properties ◽  
High Strength ◽  
Heat Treating ◽  
Beta Titanium Alloy ◽  
Good Corrosion Resistance ◽  
Beta Titanium ◽  
Alpha Beta

Abstract CARPENTER TITANIUM 6-6-2 is an alpha-beta titanium alloy offering good corrosion resistance in applications requiring high strength-to-weight ratios to 750 F (400 C). This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ti-61. Producer or source: Carpenter.

Ti-6Al-4V

Alloy Digest ◽  
1992 ◽  
Vol 41 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Titanium Alloy ◽  
High Temperature ◽  
Titanium Alloys ◽  
Heat Treating ◽  
Zero Temperature ◽  
Beta Titanium Alloy ◽  
Temperature Performance ◽  
Beta Titanium ◽  
Alpha Beta

Abstract Ti-6A1-4V and its modification Ti-6A1-4V ELI are moderately age-hardenable titanium alloys, the latter containing extra low interstitials to impart additional toughness at sub-zero temperature. This alloy is the most widely used of all titanium alloys and a great wealth of data exists. Ti-6A1-4V is characterized as an alpha rich alpha-beta titanium alloy. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ti-66. Producer or source: Timet. Originally published July 1972, revised September 1992.

DURANICKEL ALLOY 301

Alloy Digest ◽  
1963 ◽  
Vol 12 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Strength ◽  
Heat Treating ◽  
International Nickel Company ◽  
Temperature Performance

Abstract DURANICKEL Alloy 301 is a wrought, age-hardenable nickel alloy having high strength, high corrosion and heat resistance. It is recommended for springs, diaphrams, bearings, pump and valve parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-83. Producer or source: The International Nickel Company Inc..

BRUSH ALLOY 260-C

Alloy Digest ◽  
1968 ◽  
Vol 17 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Strength ◽  
Heat Treating ◽  
Casting Alloy ◽  
Good Corrosion Resistance ◽  
Temperature Performance

Abstract Brush Alloy 260-C is a beryllium nickel casting alloy having high strength, hardness and good corrosion resistance. It is recommended for fuel pump impellers, turbines, non-sparking tools, molds for plastics and glass. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Ni-138. Producer or source: Brush Beryllium Company.

MAGNESIUM ZK60A

Alloy Digest ◽  
1967 ◽  
Vol 16 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Chemical Company ◽  
Temperature Performance

Abstract Magnesium ZK60A is a heat treatable extrusion and forging alloy recommended for applications where high strength with good toughness are required. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive, shear, bearing, and bend strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Mg-62. Producer or source: The Dow Chemical Company.

ARMCO 21-6-9

Alloy Digest ◽  
1961 ◽  
Vol 10 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Austenitic Stainless Steel ◽  
Physical Properties ◽  
High Strength ◽  
Heat Treating ◽  
Steel Alloy ◽  
Temperature Performance

Abstract Armco 21-6-9 is an austenitic stainless steel alloy designed for use in applications where a combination of high strength and corrosion resistance is desired. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-125. Producer or source: Armco Inc., Eastern Steel Division.

Sign in / Sign up

Export Citation Format

Share Document