ELECTRITE CO-6

Alloy Digest ◽  
1963 ◽  
Vol 12 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
High Speed ◽  
Elevated Temperatures ◽  
High Speed Steel ◽  
Heat Treating ◽  
Steel Company ◽  
Aisi Type ◽  
Red Hardness ◽  
Cobalt Addition

Abstract ELECTRITE CO-6 is a high-speed steel of the 6 molybdenum-6 tungsten type to which 9% cobalt has been added. This cobalt addition increases the red hardness and permits a retention of greater cutting hardness at elevated temperatures. It is designated as SAE-M36 and AISI Type M36. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-35. Producer or source: Latrobe Steel Company. Originally published July 1955, revised June 1963.

ELECTRITE No. 1 and No. 1XL

Alloy Digest ◽  
1957 ◽  
Vol 6 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
Bend Strength ◽  
Steel Company ◽  
Aisi Type ◽  
Red Hardness

Abstract ELECTRITE No. 1 is a standard 18.4-1 type high-speed steel having high density, extremely good wear resisting properties. It possesses a high red hardness when used for cutting and shearing tools. It corresponds to AISI Type T1 Tool Steel. This same type steel is also supplied containing sulphide additive and is called Electrite No. 1 XL. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-62. Producer or source: Latrobe Steel Company.

AISI TYPE T15

Alloy Digest ◽  
1968 ◽  
Vol 17 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Abrasion Resistance ◽  
High Speed ◽  
Cutting Tools ◽  
High Speed Steel ◽  
Heat Treating ◽  
Steel Mills ◽  
Aisi Type ◽  
Red Hardness

Abstract AISI type T15 is a cobalt type high-speed steel having maximum abrasion resistance and red hardness. It is recommended for all types of cutting tools where the machining operation is different and extreme. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-206. Producer or source: Tool steel mills.

LESCALLOY BG42 VIM-VAR

Alloy Digest ◽  
1992 ◽  
Vol 41 (2) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
Steel Company ◽  
Aisi Type ◽  
Hot Hardness

Abstract LESCALLOY BG42 VIM-VAR is a martensitic stainless high-speed steel that combines the temper resistance and hot hardness characteristics of M-50 high-speed steel with the corrosion resistance of AISI Type 440C stainless steel. (See also LESCALLOY BG42, Alloy Digest SS-280, October 1972.) This datasheet provides information on composition, physical properties, and elasticity. It also includes information on forming, heat treating, machining, and joining. Filing Code: SS-179. Producer or source: Latrobe Steel Company. Originally published as Lesco BG42, March 1966, revised February 1992. See also Alloy Digest SS-356, October 1978.

ELECTRITE COBALT

Alloy Digest ◽  
1960 ◽  
Vol 9 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
High Speed ◽  
Cutting Tools ◽  
High Speed Steel ◽  
Heat Treating ◽  
Heavy Duty ◽  
Steel Company

Abstract ELECTRITE COBALT is a 5% cobalt type high-speed steel recommended for heavy duty cutting tools. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-89. Producer or source: Latrobe Steel Company.

AISI TYPE M2

Alloy Digest ◽  
1972 ◽  
Vol 21 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Compressive Strength ◽  
Physical Properties ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Steel Mills ◽  
Aisi Type

Abstract AISI TYPE M2 is a molybdenum-tungsten high-speed steel with a balanced analysis which produces properties applicable to all general-purpose high-speed uses. It has an excellent balance between toughness and wear resistance. This datasheet provides information on composition, physical properties, hardness, and compressive strength as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-240. Producer or source: Tool steel mills.

RED CUT COBALT

Alloy Digest ◽  
1980 ◽  
Vol 29 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Cast Iron ◽  
High Speed ◽  
Elevated Temperatures ◽  
High Speed Steel ◽  
Heat Treating ◽  
High Speeds ◽  
Red Hardness ◽  
Nonferrous Alloys ◽  
Cutting Point

Abstract RED CUT COBALT steel is made by adding 5% cobalt to the conventional 18% tungsten -4% chromium-1% vanadium high-speed steel. Cobalt increases hot or red hardness and thus enables the tool to maintain a higher hardness at elevated temperatures. This steel is best adapted for hogging cuts or where the temperature of the cutting point of the tool in increased greatly. It is well adapted for tools to be used for reaming cast-iron engine cylinders, turning alloy steel or cast iron and cutting nonferrous alloys at high speeds. This datasheet provides information on composition, physical properties, and hardness as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-367. Producer or source: Teledyne Vasco.

LATROBE M2 EUR

Alloy Digest ◽  
2010 ◽  
Vol 59 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Steel Company ◽  
M2 High Speed Steel ◽  
Specialty Steel

Abstract M2 EUR is the European version of the general purpose ASTM M2 high speed steel. This datasheet provides information on composition, physical properties, and elasticity as well as fracture toughness. It also includes information on wear resistance as well as heat treating and machining. Filing Code: TS-691. Producer or source: Latrobe Specialty Steel Company.

PANTHER 5

Alloy Digest ◽  
1976 ◽  
Vol 25 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tool Life ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
Maximum Hardness ◽  
High Carbon ◽  
Red Hardness ◽  
Cutting Speeds

Abstract Panther 5 is a 5% cobalt, high-carbon, high-vanadium, tungsten high-speed steel. Because of its excellent red hardness, higher cutting speeds can be used with Panther 5 than with the regular high-speed steels. Heat treating Panther 5 to its maximum hardness will provide long tool life. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-301. Producer or source: Allegheny Ludlum Corporation.

PEERLESS A

Alloy Digest ◽  
1959 ◽  
Vol 8 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Company ◽  
Temperature Performance ◽  
Aisi Type ◽  
Crucible Steel ◽  
Red Hardness

Abstract PEERLESS-A is a low carbon, medium tungsten hot work steel which possesses excellent red hardness. It is used in those applications where the tool operates a dull red heat. It conforms to AISI Type H21, SAE Type H21. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, and machining. Filing Code: TS-85. Producer or source: Crucible Steel Company of America.

ELECTRITE TATMO

Alloy Digest ◽  
1974 ◽  
Vol 23 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tool Steel ◽  
High Speed ◽  
Low Cost ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Tool Steels ◽  
Steel Company

Abstract ELECTRITE TATMO is a molybdenum type high-speed steel and is recommended as a general purpose tool steel. It has good toughness and excellent grindability along with a relatively low cost. These factors make it an economic and efficient member of the high-speed family of tool steels. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-268. Producer or source: Latrobe Steel Company.

Sign in / Sign up

Export Citation Format

Share Document