HWD No. 3

Alloy Digest ◽  
1958 ◽  
Vol 7 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Tensile Properties ◽  
Heat Treating ◽  
Minimum Amount ◽  
Temperature Performance ◽  
Aisi Type ◽  
Hot Work Steel

Abstract HWD No. 3 is an air-hardening hot work steel recommended for dies where a minimum amount of distortion during hardening is required. It is equivalent to AISI Type H13. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance as well as forming, heat treating, and joining. Filing Code: TS-72. Producer or source: Firth Sterling Inc..

ALLEGHENY B-47

Alloy Digest ◽  
1961 ◽  
Vol 10 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Temperature Performance ◽  
Hot Work Steel ◽  
Hot Hardness

Abstract ALLEGHENY B-47 is a chromium, tungsten, cobalt, vanadium hot work steel that has excellent resistance to shock and abrasion at elevated temperatures. It has good hot hardness. This datasheet provides information on composition, hardness, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, and machining. Filing Code: TS-70. Producer or source: Allegheny Ludlum Corporation. Originally published May 1958, revised December 1961.

TOUGHTEM

Alloy Digest ◽  
1988 ◽  
Vol 37 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Temperature Performance ◽  
Hot Work Steel ◽  
Steel Corporation ◽  
Forging Die

Abstract TOUGHTEM is a chromium-nickel-molybdenum, low-alloy, hot-work steel which has been developed especially for forging die-block applications. It has excellent through-hardening characteristics and good machinability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as heat treating, machining, and joining. Filing Code: TS-491. Producer or source: Uddeholm Steel Corporation.

UNILOY 434

Alloy Digest ◽  
1983 ◽  
Vol 32 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Temperature Performance ◽  
Aisi Type ◽  
Molybdenum Addition

Abstract UNILOY 434 is a medium-chromium (17%), non-hardening, ferritic stainless steel containing an addition of molybdenum (nominally 1%). The molybdenum addition creates a grade with increased resistance to corrosion. This steel (when compared with the molybdenum-free grade, AISI Type 430 or Uniloy 430) shows improved resistance to pitting attack from various de-icing chemicals. In addition, the color of Uniloy 434, when buffed, closely resembles that of bright chromium plate. Hence a popular application for Uniloy 434 is automotive trim. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-422. Producer or source: Cyclops Cytemp.

THERMOLD H10

Alloy Digest ◽  
1968 ◽  
Vol 17 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
Die Casting ◽  
Heat Treating ◽  
Temperature Performance ◽  
Hot Work Steel

Abstract Thermold-H10 is a chromium-molybdenum hot work steel that exhibits excellent resistance to softening at elevated temperatures. It is recommended for hot punches and shears, mandrels, and aluminum die casting dies. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, and machining. Filing Code: TS-209. Producer or source: Cyclops Corporation.

ENDURO HC

Alloy Digest ◽  
1955 ◽  
Vol 4 (2) ◽  
Keyword(s):  
Heat Treatment ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
High Chromium ◽  
Temperature Performance ◽  
Aisi Type

Abstract ENDURO HC is a high chromium heat and corrosion resisting steel of the AISI Type 446 grade. It is magnetic and cannot be hardened materially by heat treatment. This datasheet provides information on composition, physical properties, microstructure, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-25. Producer or source: Republic Steel Corporation.

HWD No. 2

Alloy Digest ◽  
1963 ◽  
Vol 12 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Die Casting ◽  
Heat Treating ◽  
Temperature Performance ◽  
Hot Work Steel ◽  
Hot Work Die

Abstract HWD-2 is a chromium-molybdenum-vanadium hot work steel particularly useful for hot work die operations that are water-cooled in service. It is particularly useful for die casting, extrusion and forging dies. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-136. Producer or source: Firth Sterling Inc..

UNIMACH No. 1

Alloy Digest ◽  
1962 ◽  
Vol 11 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Construction Equipment ◽  
Temperature Range ◽  
Temperature Performance ◽  
Hot Work Steel

Abstract Unimach No. 1 is a 5% chromium hot work steel recommended for construction equipment operating in the temperature range of 400-1000 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-115. Producer or source: Cyclops Corporation.

HOTFORM No. 1

Alloy Digest ◽  
1957 ◽  
Vol 6 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Vanadium Alloys ◽  
Temperature Performance ◽  
Hot Work Steel ◽  
Steel Corporation

Abstract HOTFORM No. 1 is a 5% chromium hot work steel containing molybdenum, tungsten and vanadium. It has maximum toughness at high strength levels. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness, and deformation. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-60. Producer or source: Vanadium Alloys Steel Corporation.

PROJECT 70/PROJECT 7000 STAINLESS TYPE 316

Alloy Digest ◽  
1997 ◽  
Vol 46 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Stainless Steels ◽  
Heat Treating ◽  
Temperature Performance ◽  
Aisi Type

Abstract Project 70 and Project 7000 Type 316 stainless steels are versions of conventional AISI Type 316 (18 Cr-8 Ni) stainless steel having improved machinability and higher tensile and creep strengths. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-339. Producer or source: Carpenter. Originally published November 1990, revised October 1997.

COPPER ALLOY No. 230

Alloy Digest ◽  
1972 ◽  
Vol 21 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Single Phase ◽  
Heat Treating ◽  
Temperature Performance

Abstract COPPER ALLOY No. 230 is a single-phase brass containing 15% zinc which is the most widely used of the low zinc brasses. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-252. Producer or source: Brass mills.

Sign in / Sign up

Export Citation Format

Share Document