UNIMACH No. 1

Alloy Digest ◽  
1962 ◽  
Vol 11 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Construction Equipment ◽  
Temperature Range ◽  
Temperature Performance ◽  
Hot Work Steel

Abstract Unimach No. 1 is a 5% chromium hot work steel recommended for construction equipment operating in the temperature range of 400-1000 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-115. Producer or source: Cyclops Corporation.

TOUGHTEM

Alloy Digest ◽  
1988 ◽  
Vol 37 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Temperature Performance ◽  
Hot Work Steel ◽  
Steel Corporation ◽  
Forging Die

Abstract TOUGHTEM is a chromium-nickel-molybdenum, low-alloy, hot-work steel which has been developed especially for forging die-block applications. It has excellent through-hardening characteristics and good machinability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as heat treating, machining, and joining. Filing Code: TS-491. Producer or source: Uddeholm Steel Corporation.

THERMOLD H10

Alloy Digest ◽  
1968 ◽  
Vol 17 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
Die Casting ◽  
Heat Treating ◽  
Temperature Performance ◽  
Hot Work Steel

Abstract Thermold-H10 is a chromium-molybdenum hot work steel that exhibits excellent resistance to softening at elevated temperatures. It is recommended for hot punches and shears, mandrels, and aluminum die casting dies. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, and machining. Filing Code: TS-209. Producer or source: Cyclops Corporation.

HWD No. 2

Alloy Digest ◽  
1963 ◽  
Vol 12 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Die Casting ◽  
Heat Treating ◽  
Temperature Performance ◽  
Hot Work Steel ◽  
Hot Work Die

Abstract HWD-2 is a chromium-molybdenum-vanadium hot work steel particularly useful for hot work die operations that are water-cooled in service. It is particularly useful for die casting, extrusion and forging dies. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-136. Producer or source: Firth Sterling Inc..

HOTFORM No. 1

Alloy Digest ◽  
1957 ◽  
Vol 6 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Vanadium Alloys ◽  
Temperature Performance ◽  
Hot Work Steel ◽  
Steel Corporation

Abstract HOTFORM No. 1 is a 5% chromium hot work steel containing molybdenum, tungsten and vanadium. It has maximum toughness at high strength levels. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness, and deformation. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-60. Producer or source: Vanadium Alloys Steel Corporation.

COPPER ALLOY No. 230

Alloy Digest ◽  
1972 ◽  
Vol 21 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Single Phase ◽  
Heat Treating ◽  
Temperature Performance

Abstract COPPER ALLOY No. 230 is a single-phase brass containing 15% zinc which is the most widely used of the low zinc brasses. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-252. Producer or source: Brass mills.

DMV 59

Alloy Digest ◽  
2009 ◽  
Vol 58 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Mechanical Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
High Mechanical Strength ◽  
Temperature Performance

Abstract DMV 59 is the material of choice for a wide variety of applications where significant corrosion resistance and high mechanical strength is necessary. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: Ni-672. Producer or source: Mannesmann DMV Stainless USA Inc.

INCONEL ALLOY N06230

Alloy Digest ◽  
2009 ◽  
Vol 58 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Inconel Alloy ◽  
Temperature Performance ◽  
Resistance To Oxidation

Abstract Inconel Alloy N06230 is a Ni-Cr-W alloy with excellent strength and resistance to oxidation at elevated temperatures. This alloy offers good metallurgical stability and is readily fabricated by conventional processes and procedures. This datasheet provides information on composition, physical properties, microstructure, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-667. Producer or source: Special Metals Corporation.

UNITEMP WASPALOY

Alloy Digest ◽  
1974 ◽  
Vol 23 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Good Resistance ◽  
Temperature Performance ◽  
Nickel Base ◽  
Corrosion And Oxidation

Abstract UNITEMP WASPALOY is a nickel-base, austenitic precipitation-hardenable alloy. It has excellent strength and good resistance to corrosion and oxidation at temperatures at least to 1600 F. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Ni-46. Producer or source: Cyclops Corporation. Originally published November 1958, revised March 1974.

ALUFONT-3

Alloy Digest ◽  
1956 ◽  
Vol 5 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Sand Casting ◽  
Casting Alloy ◽  
Temperature Performance

Abstract ALUFONT-3 is a heat treatable aluminum sand casting alloy having good machinability with fair castability. It is a high strength casting alloy. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fracture toughness. It also includes information on high temperature performance as well as heat treating, machining, and joining. Filing Code: Al-40. Producer or source: Aluminium Industrie Atkiengesellschaft.

MAGNESIUM ZK60A

Alloy Digest ◽  
1967 ◽  
Vol 16 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Chemical Company ◽  
Temperature Performance

Abstract Magnesium ZK60A is a heat treatable extrusion and forging alloy recommended for applications where high strength with good toughness are required. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and compressive, shear, bearing, and bend strength as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Mg-62. Producer or source: The Dow Chemical Company.

Sign in / Sign up

Export Citation Format

Share Document