CARPENTER FOUR-STAR

Alloy Digest ◽  
1972 ◽  
Vol 21 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Tool Steel ◽  
High Speed ◽  
High Strength ◽  
Heat Treating ◽  
High Carbon

Abstract CARPENTER FOUR-STAR is a molybdenum-tungsten high-speed tool steel with high carbon and vanadium contents. It has excellent wear resistance along with high strength. This datasheet provides information on composition and hardness as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-242. Producer or source: Carpenter.

UNS T30106

Alloy Digest ◽  
1988 ◽  
Vol 37 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
High Carbon ◽  
Steel Mills

Abstract UNS No. T30106 is an air-hardening high-carbon tool steel designed for a combination of high strength, good wear resistance, and good toughness. It is easy to heat treat with a minimum of distortion and is used extensively for plastic molds. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fracture toughness and fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-489. Producer or source: Tool steel mills.

AISI TYPE A6

Alloy Digest ◽  
1973 ◽  
Vol 22 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tool Steel ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
High Carbon ◽  
Steel Mills ◽  
Aisi Type

Abstract AISI Type A6 is an air-hardening high-carbon tool steel designed for a combination of high strength, good wear resistance, and good toughness. It is easy to heat treat with a minimum of distortion and is used extensively for plastic molds. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fracture toughness and fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-262. Producer or source: Tool steel mills.

VANADIS 23

Alloy Digest ◽  
1998 ◽  
Vol 47 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Powder Metallurgy ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tool Steel ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating

Abstract Vanadis 23 is a Cr-Mo-W-Va alloyed high-speed steel made by powder metallurgy. The tool steel offers an excellent combination of wear resistance and toughness. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on heat treating, machining, and surface treatment. Filing Code: TS-561. Producer or source: Uddeholm Corporation. See also Alloy Digest TS-552, March 1997.

LO-AIR

Alloy Digest ◽  
1964 ◽  
Vol 13 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Heavy Duty ◽  
High Carbon

Abstract Lo-Air is a high-carbon alloy steel having air hardening characteristics. It is a deep hardening steel producing a combination of high strength, toughness and wear resistance. It is recommended for precision tools and heavy duty blanking and forming dies. This datasheet provides information on composition, physical properties, hardness, tensile properties, and bend strength as well as fracture toughness and fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-154. Producer or source: Cyclops Corporation.

POTOMAC 2V

Alloy Digest ◽  
1974 ◽  
Vol 23 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tool Steel ◽  
Heat Treating ◽  
High Carbon ◽  
Temperature Performance ◽  
Hot Work Tool Steel

Abstract POTOMAC 2V is a high-carbon, high-vanadium modification of the well-known 5% chromium hot-work tool steel. It has improved wear resistance and the necessary toughness for severe forming applications. It is recommended for such applications as hot dies for extrusions and forgings, piercing points and hot punches. This datasheet provides information on composition, physical properties, and hardness as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: TS-280. Producer or source: Allegheny Ludlum Corporation.

VANITE

Alloy Digest ◽  
1986 ◽  
Vol 35 (5) ◽  
Keyword(s):  
Wear Resistance ◽  
Tool Steel ◽  
High Speed ◽  
Heat Treating ◽  
High Carbon ◽  
Steel Company ◽  
Cutting Efficiency ◽  
High Speeds ◽  
Aisi Type ◽  
Fine Surface

Abstract VANITE is a high-carbon, high-vanadium modification of the 18W-4Cr-IV (AISI Type T1) high-speed tool steel. Its increased alloy content provides increases in cutting efficiency and wear resistance. Vanite is especially suitable for light cuts at high speeds that produce a fine surface finish. It will hold a keen cutting edge and because of this it is used primarily for broaches, reamers and finishing tools. This datasheet provides information on composition, physical properties, and hardness. It also includes information on heat treating and machining. Filing Code: TS-458. Producer or source: Columbia Tool Steel Company.

CARPENTER MICRO-MELT M-42 ALLOY

Alloy Digest ◽  
1992 ◽  
Vol 41 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Powder Metallurgy ◽  
Physical Properties ◽  
Tool Steel ◽  
High Speed ◽  
Heat Treating ◽  
Uniform Structure ◽  
Tool Steels ◽  
Production Technique

Abstract CARPENTER MICRO-MELT M-42 alloy is a super-high-speed tool steel produced by powder metallurgy. This production technique results in a more uniform structure, greater ease of grinding, improved wear resistance and toughness than is characteristic of conventionally produced high-speed tool steels. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming and heat treating. Filing Code: TS-510. Producer or source: Carpenter.

LSS D7

Alloy Digest ◽  
2014 ◽  
Vol 63 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Tool Steel ◽  
Heat Treating ◽  
High Carbon ◽  
Steel Company ◽  
High Chromium ◽  
Specialty Steel

Abstract LSS D7 is a high-carbon, high-chromium, air-hardening stainless tool steel with great wear resistance. This datasheet provides information on composition and hardness as well as fracture toughness. It also includes information on wear resistance as well as heat treating and machining. Filing Code: TS-725. Producer or source: Latrobe Specialty Steel Company.

ALLEGHENY LUDLUM EXOHARD

Alloy Digest ◽  
1971 ◽  
Vol 20 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tool Steel ◽  
High Speed ◽  
Heat Treating ◽  
Aisi Type ◽  
Steel Aisi

Abstract ALLEGHENY LUDLUM EXOHARD is an ultrahard high-speed tool steel (AISI Type M47) suited for machining hard and otherwise difficult-to-machine materials. This datasheet provides information on composition, physical properties, and hardness as well as fracture toughness. It also includes information on wear resistance as well as heat treating, machining, and joining. Filing Code: TS-234. Producer or source: Allegheny Ludlum Corporation.

CARPENTER MICRO-MELT SPEED-STAR FM HiC M-2 ALLOY

Alloy Digest ◽  
1991 ◽  
Vol 40 (8) ◽  
Keyword(s):  
Heat Treatment ◽  
Fracture Toughness ◽  
Wear Resistance ◽  
Compressive Strength ◽  
Powder Metallurgy ◽  
Physical Properties ◽  
Tool Steel ◽  
High Speed ◽  
Heat Treating ◽  
Uniform Structure

Abstract Carpenter Micro-Melt Speed-Star FM HiC M-2 alloy is a molybdenum tungsten high-speed tool steel produced by powder metallurgy techniques. It has a more uniform structure than conventionally produced high-speed steels. It has good response to heat treatment, grinds easily, possesses improved wear resistance and toughness. This datasheet provides information on composition, physical properties, hardness, and compressive strength as well as fracture toughness. It also includes information on heat treating. Filing Code: TS-504. Producer or source: Carpenter.

Sign in / Sign up

Export Citation Format

Share Document