AISI TYPE A6

Alloy Digest ◽  
1973 ◽  
Vol 22 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tool Steel ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
High Carbon ◽  
Steel Mills ◽  
Aisi Type

Abstract AISI Type A6 is an air-hardening high-carbon tool steel designed for a combination of high strength, good wear resistance, and good toughness. It is easy to heat treat with a minimum of distortion and is used extensively for plastic molds. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fracture toughness and fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-262. Producer or source: Tool steel mills.

UNS T30106

Alloy Digest ◽  
1988 ◽  
Vol 37 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
High Carbon ◽  
Steel Mills

Abstract UNS No. T30106 is an air-hardening high-carbon tool steel designed for a combination of high strength, good wear resistance, and good toughness. It is easy to heat treat with a minimum of distortion and is used extensively for plastic molds. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fracture toughness and fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-489. Producer or source: Tool steel mills.

LO-AIR

Alloy Digest ◽  
1964 ◽  
Vol 13 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Heavy Duty ◽  
High Carbon

Abstract Lo-Air is a high-carbon alloy steel having air hardening characteristics. It is a deep hardening steel producing a combination of high strength, toughness and wear resistance. It is recommended for precision tools and heavy duty blanking and forming dies. This datasheet provides information on composition, physical properties, hardness, tensile properties, and bend strength as well as fracture toughness and fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-154. Producer or source: Cyclops Corporation.

AISI TYPE A2

Alloy Digest ◽  
1965 ◽  
Vol 14 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
Abrasion Resistance ◽  
Heat Treating ◽  
Bend Strength ◽  
High Carbon ◽  
Die Steel ◽  
Steel Mills ◽  
Aisi Type

Abstract AISI Type-A2 is a high-carbon, chromium, molybdenum tool and die steel having excellent non-deforming properties, abrasion resistance, toughness and good machinability. It is used for blanking and forming dies, rolls, punches, gauges, broaches, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and bend strength as well as fracture toughness. It also includes information on forming, heat treating, and joining. Filing Code: TS-168. Producer or source: Tool steel mills.

UNS T30402

Alloy Digest ◽  
1978 ◽  
Vol 27 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Cold Work ◽  
Heat Treating ◽  
Bend Strength ◽  
High Carbon ◽  
Die Steel ◽  
High Chromium ◽  
Steel Mills

Abstract UNS No. T30402 is an air-hardening high-carbon, high-chromium cold-work die steel that offers excellent wear resistance. It is a deep-hardening steel but hardens with a minimum change in size and volume. Typical uses are cold-work dies, slitting cutters, shear blades and wood-working tools. This datasheet provides information on composition, physical properties, hardness, elasticity, and bend strength as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-341. Producer or source: Tool steel mills.

AISI TYPE S7

Alloy Digest ◽  
1976 ◽  
Vol 25 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
General Purpose ◽  
Steel Mills ◽  
Aisi Type ◽  
Shock Resistance

Abstract AISI Type S7 is a chromium-molybdenum, general-purpose, air-hardening tool steel recommended for uses where shock-resistance, good hot-work properties, good wear resistance, excellent toughness and easy machining are important. These properties make it suitable for many hot-work and cold-work applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: TS-297. Producer or source: Tool steel mills.

AISI C1060

Alloy Digest ◽  
1969 ◽  
Vol 18 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Spring Steel ◽  
High Carbon ◽  
Steel Mills

Abstract AISI C1060 is a high-carbon water or oil hardening tool and spring steel recommended for heavy machinery parts, shafts, springs and miscellaneous tools requiring strength and wear resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: CS-32. Producer or source: Carbon and alloy steel mills.

AISI TYPE M2

Alloy Digest ◽  
1972 ◽  
Vol 21 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Compressive Strength ◽  
Physical Properties ◽  
High Speed ◽  
High Speed Steel ◽  
Heat Treating ◽  
General Purpose ◽  
Steel Mills ◽  
Aisi Type

Abstract AISI TYPE M2 is a molybdenum-tungsten high-speed steel with a balanced analysis which produces properties applicable to all general-purpose high-speed uses. It has an excellent balance between toughness and wear resistance. This datasheet provides information on composition, physical properties, hardness, and compressive strength as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-240. Producer or source: Tool steel mills.

AISI TYPE L2

Alloy Digest ◽  
1983 ◽  
Vol 32 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Carbon Content ◽  
Tensile Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Steel Mills ◽  
Aisi Type ◽  
Lower Carbon

Abstract AISI Type 1.2 is a chromium-vanadium tool steel of modest hardenability and variable carbon content (nominally 0.50-1.10% carbon). At its lower carbon levels, it is used for tools requiring toughness and resistance to shock and vibration. At its higher carbon levels, it is recommended for resistance to abrasion, fatigue and wear. It is used for both hot-work and cold-work applications. Among its many uses are automotive gears, forgings, gun barrels, shafts, wrenches, chisels, punches, lathe spindles, axes, shear blades, dies, files, reamers and drills. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-416. Producer or source: Tool steel mills.

RUUKKI OPTIM 900 QC

Alloy Digest ◽  
2014 ◽  
Vol 63 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Bend Radius ◽  
Minimum Yield

Abstract Optim 900 QC (896 MPa minimum yield strength) is a quenched (Q), cold formable (C) steel that exceeds most other materials with the tightest bend radius. The Optim family of alloys offers high strength and good workshop properties. This datasheet provides information on composition, physical properties, microstructure, tensile properties, and bend strength as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, and joining. Filing Code: CS-180. Producer or source: Rautaruukki Corporation.

DOMEX WEAR

Alloy Digest ◽  
2003 ◽  
Vol 52 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength Steel ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Wear Resistant ◽  
Very High

Abstract Domex Wear is a wear-resistant, very-high-strength steel that can be cold formed. It is used in the construction and mining industries. This datasheet provides information on composition, physical properties, hardness, tensile properties, and bend strength as well as fracture toughness. It also includes information on wear resistance as well as heat treating and joining. Filing Code: CS-135. Producer or source: SSAB Swedish Steel Inc.

Sign in / Sign up

Export Citation Format

Share Document