CANNON-MUSKEGON A-2

Alloy Digest ◽  
1973 ◽  
Vol 22 (6) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Abrasion Resistance ◽  
Silicon Content ◽  
Cast Steel ◽  
Heat Treating ◽  
High Carbon ◽  
Annealed Condition

Abstract CANNON-MUSKEGON A-2 is a high-carbon air-hardening cast tool steel with excellent non-deforming properties and abrasion resistance in the quenched and tempered condition. It has good machinability in the annealed condition. A higher silicon content is permissible in this cast steel than in AISI A2 (wrought) tool steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting, heat treating, machining, and joining. Filing Code: TS-257. Producer or source: Cannon-Muskegon Corporation.

CANNON-MUSKEGON D-2

Alloy Digest ◽  
1973 ◽  
Vol 22 (7) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Tool Steel ◽  
Silicon Content ◽  
Cast Steel ◽  
Heat Treating ◽  
High Carbon ◽  
High Chromium ◽  
Temperature Performance ◽  
Aisi D2

Abstract CANNON-MUSKEGON D-2 is a high-carbon high-chromium air-hardening cast tool steel with excellent resistance to abrasion. It is moderately machinable with excellent non-deforming characteristics. A higher silicon content is permissible in this cast steel than in AISI D2 (wrought) tool steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance as well as casting, heat treating, machining, and joining. Filing Code: TS-259. Producer or source: Cannon-Muskegon Corporation.

CANNON-MUSKEGON H-11

Alloy Digest ◽  
1973 ◽  
Vol 22 (3) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Silicon Content ◽  
Cast Steel ◽  
Heat Treating ◽  
Red Hardness ◽  
The Sacrifice

Abstract CANNON-MUSKEGON H-11 is an air-hardening hot-work cast tool steel used for hot applications requiring good toughness combined with good red-hardness and for cold applications where toughness is required at the sacrifice of some wear. A higher silicon content is permissable in this cast steel than in AISI H-11 (wrought) tool steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on casting, heat treating, machining, and joining. Filing Code: TS-251. Producer or source: Cannon-Muskegon Corporation.

CANNON-MUSKEGON H-12

Alloy Digest ◽  
1973 ◽  
Vol 22 (5) ◽  
Keyword(s):  
Physical Properties ◽  
Tool Steel ◽  
Silicon Content ◽  
Cast Steel ◽  
Heat Treating ◽  
Austenitizing Temperature ◽  
Red Hardness

Abstract CANNON-MUSKEGON H-12 is an air-hardening hot-work cast tool steel used for applications requiring good toughness combined with good red hardness. The alloy will harden from a relatively low austenitizing temperature. A higher silicon content is permissable in this cast steel than in AISI H-12 (wrought) tool steel. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on casting, heat treating, machining, and joining. Filing Code: TS-255. Producer or source: Cannon-Muskegon Corporation.

SELECT B

Alloy Digest ◽  
1985 ◽  
Vol 34 (10) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Abrasion Resistance ◽  
Heat Treating ◽  
Tool Steels ◽  
High Carbon ◽  
Steel Company ◽  
Die Steel ◽  
High Chromium ◽  
Aisi Type

Abstract SELECT B is a fully uniform air-hardening die steel having abrasion resistance intermediate between Olympic (AISI Type D2) high-carbon, high-chromium die steel and Badger (AISI Type O1) oil-hardening die steel. SELECT B has excellent non-deforming, deep-hardening characteristics and good toughness. Its machinability is comparable to most oil-hardening tool steels. Among its many uses are cold blanking and forming dies, rolls, punches, gages and broaches. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, and machining. Filing Code: TS-448. Producer or source: Latrobe Steel Company.

LESCO T-15 PM

Alloy Digest ◽  
1990 ◽  
Vol 39 (8) ◽  
Keyword(s):  
Powder Metallurgy ◽  
Physical Properties ◽  
Tool Steel ◽  
Abrasion Resistance ◽  
High Speed ◽  
Heat Treating ◽  
High Carbon ◽  
Steel Company ◽  
Good Retention ◽  
Hot Hardness

Abstract LESCOT-15 PM is a special purpose tungsten type high-speed tool steel containing cobalt for good retention of hot hardness and high carbon and vanadium for enhanced abrasion resistance. It is produced by powder metallurgy. This datasheet provides information on composition, physical properties, microstructure, hardness, and elasticity. It also includes information on heat treating and machining. Filing Code: TS-498. Producer or source: Latrobe Steel Company. Originally published August 1989, revised August 1990.

JESSOP-SAVILLE JO. SPECIAL

Alloy Digest ◽  
1967 ◽  
Vol 16 (7) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Abrasion Resistance ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Extrusion Dies ◽  
Temperature Performance ◽  
Red Hardness

Abstract Jessop-Saville JO. Special is a basic hot work tool steel exhibiting good red-hardness and abrasion resistance at elevated temperatures. It is recommended for forging and extrusion dies. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance as well as heat treating, machining, and joining. Filing Code: TS-195. Producer or source: Jessop-Saville Ltd, Brightside Works.

EDGAR ALLEN - VS4

Alloy Digest ◽  
1965 ◽  
Vol 14 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
High Carbon

Abstract Edgar Allen VS4 is a high carbon, water hardening tool steel recommended for cold heading dies. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-166. Producer or source: A. Milne & Company (Distributor).

UNS T30106

Alloy Digest ◽  
1988 ◽  
Vol 37 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
High Carbon ◽  
Steel Mills

Abstract UNS No. T30106 is an air-hardening high-carbon tool steel designed for a combination of high strength, good wear resistance, and good toughness. It is easy to heat treat with a minimum of distortion and is used extensively for plastic molds. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fracture toughness and fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-489. Producer or source: Tool steel mills.

HERCULES

Alloy Digest ◽  
1958 ◽  
Vol 7 (9) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Cold Working ◽  
Heat Treating ◽  
High Carbon ◽  
Wear Resistant

Abstract HERCULES is a high-carbon chromium-vanadium tool steel recommended for cold-working applications where a hard, wear-resistant surface along with a tough core is required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-74. Producer or source: Cyclops Corporation.

HYCC

Alloy Digest ◽  
1963 ◽  
Vol 12 (4) ◽  
Keyword(s):  
Physical Properties ◽  
Tool Steel ◽  
Abrasion Resistance ◽  
Heat Treating ◽  
High Carbon ◽  
Steel Company ◽  
High Chromium ◽  
Crucible Steel

Abstract HYCC is a high-carbon high-chromium tool steel having high wear and abrasion resistance combined with non-deforming characteristics. It is particularly adaptable for blanking dies and punches. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-132. Producer or source: Crucible Steel Company of America.

Sign in / Sign up

Export Citation Format

Share Document