BOFORS BP20-2

Alloy Digest ◽  
1973 ◽  
Vol 22 (10) ◽  
Keyword(s):  
Heat Treatment ◽  
Fracture Toughness ◽  
Physical Properties ◽  
Surface Treatment ◽  
Die Casting ◽  
Heat Treating ◽  
Zinc Alloys ◽  
Lead And Zinc ◽  
Heat Treated ◽  
Alloy Tool

Abstract BOFORS BP20-2 is a vacuum-degassed (BOVAC) alloy tool steel recommended for plastic molds, brake dies, die-casting dies for tin, lead and zinc alloys, and for constructional parts. It is supplied prehardened to 270-300 Brinell and needs no further heat treatment before use; however, it may be heat treated for a number of applications that require higher hardness and strength. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: TS-263. Producer or source: Bofors Steels Inc..

CRUCIBLE CSM #2

Alloy Digest ◽  
1968 ◽  
Vol 17 (9) ◽  
Keyword(s):  
Physical Properties ◽  
Tool Steel ◽  
Die Casting ◽  
Heat Treating ◽  
Steel Company ◽  
Heat Treated ◽  
Alloy Tool ◽  
Crucible Steel

Abstract Crucible CSM #2 is an alloy tool steel recommended for die casting dies and plastic molds. It is usually heat treated to two hardness levels, either 200 Brinell or 300 Brinell. CSM #2 machines readily and polishes easily at both hardness levels. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-210. Producer or source: Crucible Steel Company of America.

MAXEL 3 1/2

Alloy Digest ◽  
1971 ◽  
Vol 20 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Brinell Hardness ◽  
Heat Treating ◽  
Treated Condition ◽  
Heat Treated ◽  
Heat Treated Condition ◽  
Specialty Metals

Abstract MAXEL 3 1/2 is a free-machining alloy steel that provides an outstanding combination of heat-treated properties and superior machinability. It can be supplied in the heat-treated condition at 262-311 Brinell hardness. See also MAX-EL 3 1/2, Alloy Digest SA-45, July 1956. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: SA-262. Producer or source: Crucible Specialty Metals Division, Colt Industries.

CRYONIC 5

Alloy Digest ◽  
1972 ◽  
Vol 21 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Heat Treating ◽  
Temperature Performance ◽  
Heat Treated ◽  
Molybdenum Steel ◽  
International Sales

Abstract CRYONIC 5 is a 5% nickel-0.50% manganese-0.25% molybdenum steel designed and specially heat treated for use in storage vessels at 275 F or lower. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-276. Producer or source: Armco International Sales.

SUPER-Z

Alloy Digest ◽  
1978 ◽  
Vol 27 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Aluminum Alloy ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Creep Resistance ◽  
Heat Treating ◽  
Zinc Alloys ◽  
Temperature Performance

Abstract SUPER-Z is a superplastic zinc-aluminum alloy basically of the eutectoid composition of 78% zinc-22% aluminum with various minor additives to improve its properties, such as strength and creep resistance. Four grades of superplastic zinc alloys are available: SUPER-Z 100, SUPER-Z 200, SUPER-Z 300 and SUPER-Z 400. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Zn-34. Producer or source: The New Jersey Zinc Company.

ARMCO NI-COP

Alloy Digest ◽  
1978 ◽  
Vol 27 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Carbon ◽  
Unique Combination ◽  
Heat Treated ◽  
Wide Range

Abstract ARMCO NI-COP is a low-carbon alloy steel that can be furnished in three different heat-treated conditions, each providing different strength and toughness levels. It is suitable for a wide range of applications because of its unique combination of properties. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-348. Producer or source: Armco Inc., Southwestern Steel Division.

ECLIPSALOY 130

Alloy Digest ◽  
1957 ◽  
Vol 6 (8) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Die Casting ◽  
Impact Resistance ◽  
Heat Treating ◽  
Hot Cracking ◽  
Casting Alloy ◽  
Cracking Tendency

Abstract ECLIPSALOY 130 is a magnesium die casting alloy having improved ductility, high corrosion, and impact resistance. The alloy was developed primarily to obtain an alloy of magnesium for die casting with less hot cracking tendency than those in use at the time of its development. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and surface treatment. Filing Code: Mg-33. Producer or source: Bendix Aviation Corporation.

FERRO-TIC SK

Alloy Digest ◽  
1975 ◽  
Vol 24 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Titanium Carbide ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Hot Working ◽  
Heat Treated

Abstract FERRO-TIC SK is a cemented carbide comprising titanium carbide in a matrix of 5% chromium tool steel. It can be heat treated and machined by conventional means and is recommended for cold and hot-working dies and heavy-impact tools. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: TS-284. Producer or source: Chromalloy Metal Tectonics Company.

UNITEMP N-155

Alloy Digest ◽  
1971 ◽  
Vol 20 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Wide Temperature Range ◽  
Heat Treating ◽  
Combustion Chambers ◽  
Temperature Performance ◽  
Oxidation And Corrosion

Abstract UNITEMP N-155 is an iron-base austenitic alloy used over a wide temperature range from subzero to about 1800 or 1900 F. It has relatively good oxidation and corrosion resistance. It is used in such applications as turbine rotors, shafts and blades, afterburner parts, nozzles and combustion chambers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance as well as forming, heat treating, joining, and surface treatment. Filing Code: Fe-48. Producer or source: Cyclops Corporation.

DURANICKEL ALLOY 301

Alloy Digest ◽  
1963 ◽  
Vol 12 (6) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Strength ◽  
Heat Treating ◽  
International Nickel Company ◽  
Temperature Performance

Abstract DURANICKEL Alloy 301 is a wrought, age-hardenable nickel alloy having high strength, high corrosion and heat resistance. It is recommended for springs, diaphrams, bearings, pump and valve parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-83. Producer or source: The International Nickel Company Inc..

MONEL ALLOY R-405

Alloy Digest ◽  
1963 ◽  
Vol 12 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Nickel Copper

Abstract MONEL alloy R-405 is a machining grade of nickel-copper alloy that combines toughness, strength and corrosion resistance of MONEL alloy 400 with excellent machinability. The alloy is designed especially for use in automatic screw machines. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-79. Producer or source: Huntington Alloy Products Division.

Sign in / Sign up

Export Citation Format

Share Document