CROMO-W55

Alloy Digest ◽  
1974 ◽  
Vol 23 (10) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Bethlehem Steel Corporation ◽  
High Hardenability ◽  
Medium Carbon ◽  
Steel Corporation

Abstract CROMO-W55 is a medium-carbon air-hardening tool steel for cold-work applications. It is useful for special tools because it has a combination of good wear resistance, toughness and high hardenability. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-275. Producer or source: Bethlehem Steel Corporation.

AIR-4

Alloy Digest ◽  
1963 ◽  
Vol 12 (2) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
High Wear Resistance ◽  
Bethlehem Steel Corporation ◽  
Steel Corporation ◽  
Machining Characteristics

Abstract BETHLEHEM AIR-4 is a medium alloy air-hardening tool steel having low deformation, high wear resistance and hardness, deep hardening properties and adequate toughness for severe service. It has excellent free-machining characteristics. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-129. Producer or source: Bethlehem Steel Corporation.

HOTFORM No. 3

Alloy Digest ◽  
1981 ◽  
Vol 30 (9) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Cold Work ◽  
Heat Treating ◽  
High Hardenability ◽  
Cold Forming ◽  
Medium Carbon ◽  
Die Steel

Abstract HOTFORM No. 3 is a medium-carbon, air-hardening, cold-work die steel. It also is used in some applications as a hot-work tool and die steel. An excellent combination of high hardenability, good wear resistance and toughness makes Hotform No. 3 useful for special tools. Typical applications are blanking dies, cold-forming dies, punches and cold and hot shear blades. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: TS-386. Producer or source: Teledyne Vasco.

DEUTSCHE EDELSTAHLWERKE CRYODUR 1730

Alloy Digest ◽  
2021 ◽  
Vol 70 (1) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Hard Case ◽  
Medium Carbon ◽  
Hardened Zone ◽  
Specialty Steel ◽  
Cold Work Tool Steel

Abstract Deutsche Edelstahlwerke Cryodur 1730 is a medium-carbon, non-alloy cold-work tool steel. It is primarily used in the non-heattreated condition. For special applications it is used in the quenched and tempered condition. Owing to its low hardenability Cryodur 1730 develops a fully hardened zone that is relatively thin, even when quenched drastically. Thicker sections have a hard case over a tough core. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on wear resistance as well as heat treating, machining, and joining. Filing Code: TS-808. Producer or source: Deutsche Edelstahlwerke Specialty Steel.

COMPAX

Alloy Digest ◽  
1988 ◽  
Vol 37 (3) ◽  
Keyword(s):  
Wear Resistance ◽  
Compressive Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tool Steel ◽  
Dimensional Stability ◽  
Heat Treating ◽  
High Toughness ◽  
Steel Corporation

Abstract COMPAX is a chromium-molybdenum shock-resistant tool steel characterized by high toughness, good wear resistance, good through hardening and good dimensional stability during hardening. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength. It also includes information on heat treating, machining, joining, and surface treatment. Filing Code: TS-488. Producer or source: Uddeholm Steel Corporation.

COLUMBIA S6

Alloy Digest ◽  
1985 ◽  
Vol 34 (8) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Steel Company ◽  
High Hardenability ◽  
Heat Treated ◽  
Strength And Toughness

Abstract COLUMBIA S6 is a silicon-manganese shock-resisting tool steel with fairly high hardenability. It offers superior toughness and wear resistance when compared to conventional shock-resisting steels heat treated to Rockwell C 54 to 56. For optimum strength and toughness, parts should be tempered within the range 400 to 600 F. Among its many applications are shear blades, punches, hand chisels and pneumatic tools. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-445. Producer or source: Columbia Tool Steel Company.

CYCLOPS SCK

Alloy Digest ◽  
1979 ◽  
Vol 28 (3) ◽  
Keyword(s):  
Heat Treatment ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Optimum Combination ◽  
Cold Work Tool Steel ◽  
Minimum Distortion

Abstract CYCLOPS SCK is a cold-work tool steel with a balanced composition to provide air hardening and an optimum combination of toughness, wear resistance and minimum distortion during heat treatment. Typical applications are shear blades, trimming dies and forming rolls, including grade rolls for cutlery and flatware. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-346. Producer or source: Cyclops Corporation.

LESCOWEAR

Alloy Digest ◽  
2005 ◽  
Vol 54 (11) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Cold Work Tool Steel

Abstract Lescowear is a medium-chromium-containing air-hardening cold-work tool steel. It is a versatile alloy with a combination of toughness and wear resistance. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on wear resistance as well as forming, heat treating, and machining. Filing Code: TS-623. Producer or source: Timken Latrobe Steel.

BÖHLER K490 MICROCLEAN

Alloy Digest ◽  
2016 ◽  
Vol 65 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
North America ◽  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Powder Metal ◽  
Cold Work Tool Steel

Abstract Böhler (or Boehler) K490 Microclean is an improved and more efficient cold work tool steel compared with other commonly used PM steels such as M4 or PM23. Toughness is more than doubled with a similar wear resistance. This datasheet provides information on composition and physical properties as well as fracture toughness. It also includes information on forming, heat treating, and powder metal forms. Filing Code: TS-734. Producer or source: Böhler-Uddeholm North America. See also Alloy Digest TS-740, April 2017.

DEUTSCHE EDELSTAHLWERKE CRYODUR 2235

Alloy Digest ◽  
2021 ◽  
Vol 70 (3) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Cutting Edge ◽  
High Carbon ◽  
Short Run ◽  
Specialty Steel ◽  
Cold Work Tool Steel

Abstract Deutsche Edelstahlwerke Cryodur 2235 is a high-carbon, Cr-V, alloy cold-work tool steel that has medium hardenability and is suitable for short-run tooling requiring a combination of good wear resistance and toughness, and a keen cutting edge. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming and heat treating. Filing Code: TS-811. Producer or source: Deutsche Edelstahlwerke Specialty Steel.

UDDEHOLM VIKING

Alloy Digest ◽  
2021 ◽  
Vol 70 (1) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Cold Work ◽  
Heat Treating ◽  
Vanadium Alloy ◽  
Heavy Duty ◽  
Medium Carbon ◽  
Cold Work Tool Steel

Abstract Uddeholm Viking is a medium-carbon, chromium-molybdenum-vanadium, alloy cold-work tool steel that is characterized by an excellent combination of wear resistance and toughness required for chipper-knives and for heavy-duty blanking and forming. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on heat treating and surface treatment. Filing Code: TS-807. Producer or source: Uddeholms AB (a voestalpine company).

Sign in / Sign up

Export Citation Format

Share Document