CYCLOPS SCK

Alloy Digest ◽  
1979 ◽  
Vol 28 (3) ◽  
Keyword(s):  
Heat Treatment ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Optimum Combination ◽  
Cold Work Tool Steel ◽  
Minimum Distortion

Abstract CYCLOPS SCK is a cold-work tool steel with a balanced composition to provide air hardening and an optimum combination of toughness, wear resistance and minimum distortion during heat treatment. Typical applications are shear blades, trimming dies and forming rolls, including grade rolls for cutlery and flatware. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, and machining. Filing Code: TS-346. Producer or source: Cyclops Corporation.

HI-WEAR 64

Alloy Digest ◽  
1962 ◽  
Vol 11 (8) ◽  
Keyword(s):  
Heat Treatment ◽  
Wear Resistance ◽  
Low Temperature ◽  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Temperature Heat ◽  
Cold Work Tool Steel ◽  
Temperature Heat Treatment

Abstract Hi-Wear 64 is a cold work tool steel offering improved wear resistance and low temperature heat treatment. It is a deep hardening non-deforming steel recommended for tools to blank and form abrasive materials. This datasheet provides information on composition, physical properties, and hardness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-122. Producer or source: Carpenter.

LESCOWEAR

Alloy Digest ◽  
2005 ◽  
Vol 54 (11) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Cold Work Tool Steel

Abstract Lescowear is a medium-chromium-containing air-hardening cold-work tool steel. It is a versatile alloy with a combination of toughness and wear resistance. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on wear resistance as well as forming, heat treating, and machining. Filing Code: TS-623. Producer or source: Timken Latrobe Steel.

BÖHLER K490 MICROCLEAN

Alloy Digest ◽  
2016 ◽  
Vol 65 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
North America ◽  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Powder Metal ◽  
Cold Work Tool Steel

Abstract Böhler (or Boehler) K490 Microclean is an improved and more efficient cold work tool steel compared with other commonly used PM steels such as M4 or PM23. Toughness is more than doubled with a similar wear resistance. This datasheet provides information on composition and physical properties as well as fracture toughness. It also includes information on forming, heat treating, and powder metal forms. Filing Code: TS-734. Producer or source: Böhler-Uddeholm North America. See also Alloy Digest TS-740, April 2017.

DEUTSCHE EDELSTAHLWERKE CRYODUR 2235

Alloy Digest ◽  
2021 ◽  
Vol 70 (3) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Cutting Edge ◽  
High Carbon ◽  
Short Run ◽  
Specialty Steel ◽  
Cold Work Tool Steel

Abstract Deutsche Edelstahlwerke Cryodur 2235 is a high-carbon, Cr-V, alloy cold-work tool steel that has medium hardenability and is suitable for short-run tooling requiring a combination of good wear resistance and toughness, and a keen cutting edge. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming and heat treating. Filing Code: TS-811. Producer or source: Deutsche Edelstahlwerke Specialty Steel.

TOUGHTEC SF

Alloy Digest ◽  
2007 ◽  
Vol 56 (5) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Compressive Strength ◽  
North America ◽  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
High Wear Resistance ◽  
Cold Work Tool Steel

Abstract Toughtec SF is a spray-formed cold-work tool steel offering a combination of high wear resistance and very good ductility. Toughtec SF is suitable for the production of hot shearing dies. This datasheet provides information on composition, physical properties, hardness, elasticity, and compressive strength as well as fracture toughness. It also includes information on wear resistance as well as forming, heat treating, and machining. Filing Code: TS-648. Producer or source: Böhler-Uddeholm North America.

BÖHLER K490 MICROCLEAN

Alloy Digest ◽  
2017 ◽  
Vol 66 (4) ◽  
Keyword(s):  
Wear Resistance ◽  
Powder Metallurgy ◽  
North America ◽  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Powder Metal ◽  
High Toughness ◽  
Cold Work Tool Steel

Abstract Böhler (or Boehler) K490 Microclean is a PM cold work tool steel that has a combination of wear resistance and high toughness. It is made by powder metallurgy. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on wear resistance as well as heat treating and powder metal forms. Filing Code: TS-740. Producer or source: Böhler-Uddeholm North America. See also Alloy Digest TS-734, February 2016.

DEUTSCHE EDELSTAHLWERKE CRYODUR 1730

Alloy Digest ◽  
2021 ◽  
Vol 70 (1) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Hard Case ◽  
Medium Carbon ◽  
Hardened Zone ◽  
Specialty Steel ◽  
Cold Work Tool Steel

Abstract Deutsche Edelstahlwerke Cryodur 1730 is a medium-carbon, non-alloy cold-work tool steel. It is primarily used in the non-heattreated condition. For special applications it is used in the quenched and tempered condition. Owing to its low hardenability Cryodur 1730 develops a fully hardened zone that is relatively thin, even when quenched drastically. Thicker sections have a hard case over a tough core. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on wear resistance as well as heat treating, machining, and joining. Filing Code: TS-808. Producer or source: Deutsche Edelstahlwerke Specialty Steel.

DEUTSCHE EDELSTAHLWERKE CRYODUR 2101

Alloy Digest ◽  
2020 ◽  
Vol 69 (8) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Chromium Alloy ◽  
High Carbon ◽  
Specialty Steel ◽  
Cold Work Tool Steel ◽  
Manganese Chromium

Abstract Deutsche Edelstahlwerke Cryodur 2101 is a high-carbon, silicon-manganese-chromium, alloy cold-work tool steel that possesses good wear resistance and excellent toughness, and is primarily used for shock resisting applications. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming and heat treating. Filing Code: TS-798. Producer or Source: Deutsche Edelstahlwerke Specialty Steel.

WEARTEC SF

Alloy Digest ◽  
2007 ◽  
Vol 56 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
North America ◽  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
High Wear Resistance ◽  
Good Resistance ◽  
Cold Work Tool Steel

Abstract Weartec SF is a spray formed cold-work tool steel offering a combination of high wear resistance and very good resistance to chipping, along with good toughness and ductility. Weartec SF is suitable for the production of cutting rolls and slitter knives. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-646. Producer or source: Böhler-Uddeholm North America.

BOEHLER K390 MICROCLEAN

Alloy Digest ◽  
2004 ◽  
Vol 53 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Compressive Strength ◽  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Powder Metal ◽  
High Compressive Strength ◽  
Cold Work Tool Steel

Abstract Boehler K390 Microclean is a cold work tool steel with an extremely good wear resistance combined with good toughness and a high compressive strength. This alloy is of powder metallurgical origins and is very homogeneous. This datasheet provides information on composition, physical properties, microstructure, and hardness as well as fracture toughness. It also includes information on wear resistance as well as heat treating, machining, and powder metal forms. Filing Code: TS-607. Producer or source: Böhler Edelstahl GMBH, Böhler-Uddeholm N. America.

Sign in / Sign up

Export Citation Format

Share Document