UHB REGIN 3

Alloy Digest ◽  
1975 ◽  
Vol 24 (10) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Red Hardness

Abstract UHB Regin 3 is a chromium-tungsten-vanadium tool steel characterized by good toughness (especially when exposed to impact stresses), high red hardness, good wear resistance and good machinability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-291. Producer or source: Uddeholm Aktiebolag.

CANNON-MUSKEGON H-11

Alloy Digest ◽  
1973 ◽  
Vol 22 (3) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Silicon Content ◽  
Cast Steel ◽  
Heat Treating ◽  
Red Hardness ◽  
The Sacrifice

Abstract CANNON-MUSKEGON H-11 is an air-hardening hot-work cast tool steel used for hot applications requiring good toughness combined with good red-hardness and for cold applications where toughness is required at the sacrifice of some wear. A higher silicon content is permissable in this cast steel than in AISI H-11 (wrought) tool steel. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on casting, heat treating, machining, and joining. Filing Code: TS-251. Producer or source: Cannon-Muskegon Corporation.

CARPENTER T-K

Alloy Digest ◽  
1969 ◽  
Vol 18 (5) ◽  
Keyword(s):  
Wear Resistance ◽  
Compressive Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Extrusion Dies ◽  
Temperature Performance ◽  
Red Hardness

Abstract Carpenter T-K is a tungsten-chromium type hot-work steel having good red-hardness and resistance to abrasion. It will withstand high operating temperatures up to 1000 F for long periods. It is recommended for hot shear blades, forging and extrusion dies, hot compression tools, and similar applications where high compressive strength and wear resistance at elevated temperatures are required. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-219. Producer or source: Carpenter.

CARPENTER No. 882

Alloy Digest ◽  
1978 ◽  
Vol 27 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Temperature Performance ◽  
Hot Work Tool Steel ◽  
Red Hardness

Abstract CARPENTER No. 882 is a 5% chromium hot-work tool steel designed particularly for applications requiring extreme toughness combined with good red hardness. It also has found cold-work applications. It can be used at strength levels in excess of 260,000 psi (18,300 kg/cm2). This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-339. Producer or source: Carpenter.

CARPENTER MICRO-MELT A11-LVC

Alloy Digest ◽  
2000 ◽  
Vol 49 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Temperature Performance

Abstract Micro-Melt A11-LVC is a high-vanadium tool steel produced by the Carpenter Micro-Melt powder process. It provides higher toughness than Carpenter Micro-Melt A11 (Alloy Digest TS-571, January 2000) with lower wear resistance. It is used where slightly less wear resistance than that of Micro-Melt A11 is acceptable. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and wear resistance as well as heat treating and machining. Filing Code: TS-573. Producer or source: Carpenter.

CRUCIBLE CPM REX 54 HS

Alloy Digest ◽  
2021 ◽  
Vol 70 (9) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tool Steel ◽  
Abrasion Resistance ◽  
High Speed ◽  
Heat Treating ◽  
Wear Properties ◽  
Red Hardness

Abstract Crucible CPM Rex 54 HS is a cobalt-bearing high speed tool steel that is produced by the proprietary Crucible Particle Metallurgy (CPM) process. It combines the wear properties of the popular high vanadium M4 grade with the red hardness of the cobalt-bearing M35/Crucible CPM Rex 45 HS grades. Crucible CPM Rex 54 HS may be used as an upgrade for improved red hardness over M3 or M4 without giving up the abrasion resistance, or as an upgrade for improved wear resistance over M35 or Crucible CPM Rex 45 HS without giving up the red hardness. This datasheet provides information on composition, physical properties, microstructure, hardness, and elasticity. It also includes information on wear resistance as well as heat treating and surface treatment. Filing Code: TS-818. Producer or source: Crucible Industries LLC.

JESSOP-SAVILLE JO. SPECIAL

Alloy Digest ◽  
1967 ◽  
Vol 16 (7) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Abrasion Resistance ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Extrusion Dies ◽  
Temperature Performance ◽  
Red Hardness

Abstract Jessop-Saville JO. Special is a basic hot work tool steel exhibiting good red-hardness and abrasion resistance at elevated temperatures. It is recommended for forging and extrusion dies. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance as well as heat treating, machining, and joining. Filing Code: TS-195. Producer or source: Jessop-Saville Ltd, Brightside Works.

AISI TYPE S5

Alloy Digest ◽  
1971 ◽  
Vol 20 (8) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Steel Mills ◽  
Aisi Type ◽  
Shock Resistance

Abstract AISI Type S5 was developed primarily for maximum shock resistance at hardnesses below Rockwell C 59. It may be hardened in either oil or water and has good wear-resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-237. Producer or source: Tool steel mills.

UNS T30106

Alloy Digest ◽  
1988 ◽  
Vol 37 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
High Carbon ◽  
Steel Mills

Abstract UNS No. T30106 is an air-hardening high-carbon tool steel designed for a combination of high strength, good wear resistance, and good toughness. It is easy to heat treat with a minimum of distortion and is used extensively for plastic molds. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and bend strength as well as fracture toughness and fatigue. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-489. Producer or source: Tool steel mills.

HECLA

Alloy Digest ◽  
1958 ◽  
Vol 7 (1) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Fatigue Resistance ◽  
Tool Steel ◽  
High Strength ◽  
Heat Treating ◽  
High Fatigue ◽  
Machine Parts

Abstract HECLA is a high strength, tough tool steel with high fatigue resistance intended for tools and machine parts requiring great toughness and moderate wear resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-66. Producer or source: H. K. Porter Company Inc..

THERMOLD H13

Alloy Digest ◽  
1972 ◽  
Vol 21 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
High Temperature ◽  
Elevated Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Heat Treating ◽  
Temperature Performance ◽  
Hot Hardness

Abstract THERMOLD H13 (formerly Thermold AV) is an air-hardening hot-work tool steel having good wear resistance and hot hardness at elevated temperature. Uniforged Rounds of THERMOLD H13 were developed especially for critically stressed extrusion tools and other hot-work tooling applications. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-241. Producer or source: Cyclops Corporation.

Sign in / Sign up

Export Citation Format

Share Document