HOTFORM No. 2

Alloy Digest ◽  
1982 ◽  
Vol 31 (2) ◽  
Keyword(s):  
Physical Properties ◽  
Surface Treatment ◽  
Tool Steel ◽  
Elevated Temperatures ◽  
Cold Work ◽  
High Strength ◽  
Heat Treating ◽  
Shock Resistance ◽  
Structural Parts ◽  
Red Hardness

Abstract HOTFORM No. 2 is a 5% chromium hot-work tool steel designed to provide an excellent combination of toughness (shock resistance), red hardness and resistance to abrasion. It is recommended for hot-die applications and for structural parts requiring high strength at elevated temperatures. It will withstand rapid cooling from maximum operating temperatures. Hotform No. 2 also is used in some cold-work applications. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: TS-394. Producer or source: Teledyne Vasco.

GUTERL H-11

Alloy Digest ◽  
1983 ◽  
Vol 32 (3) ◽  
Keyword(s):  
Physical Properties ◽  
Surface Treatment ◽  
Tool Steel ◽  
Heat Treating ◽  
Work Characteristics ◽  
Jet Engines ◽  
Shock Resistance ◽  
Structural Parts ◽  
Red Hardness ◽  
The Many

Abstract GUTERL H-11 is a 5% chromium hot-work tool steel with an excellent combination of red hardness, shock resistance (toughness) and resistance to abrasion; these are the properties needed for good hot-work characteristics. It will withstand drastic cooling from maximum operating temperatures. Among the many uses for this steel are hot-die applications, structural parts for jet engines and missiles, extrusion mandrels and forging dies. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: TS-412. Producer or source: Guterl Special Steel Corporation.

UDIMET 520

Alloy Digest ◽  
1962 ◽  
Vol 11 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Elevated Temperatures ◽  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Nickel Base Alloy ◽  
Nickel Base

Abstract UDIMET 520 is a nickel-base alloy recommended for applications where high strength at elevated temperatures is required. It is suitable for service at temperatures up to 1800 F. This datasheet provides information on composition, physical properties, and tensile properties as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Ni-74. Producer or source: Special Metals Inc..

CARPENTER No. 882

Alloy Digest ◽  
1978 ◽  
Vol 27 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
Temperature Performance ◽  
Hot Work Tool Steel ◽  
Red Hardness

Abstract CARPENTER No. 882 is a 5% chromium hot-work tool steel designed particularly for applications requiring extreme toughness combined with good red hardness. It also has found cold-work applications. It can be used at strength levels in excess of 260,000 psi (18,300 kg/cm2). This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-339. Producer or source: Carpenter.

CARPENTER S7

Alloy Digest ◽  
1978 ◽  
Vol 27 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Tool Steel ◽  
High Resistance ◽  
Cold Work ◽  
Heat Treating ◽  
General Purpose ◽  
Good Resistance

Abstract CARPENTER S7 is a general-purpose air-hardening tool steel characterized by high resistance to impact and shock. It has good resistance to softening at moderately high temperatures. This combination of properties makes it suitable for many hot-work and cold-work applications. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on heat treating, machining, and surface treatment. Filing Code: TS-329. Producer or source: Carpenter.

CRUCIBLE S7

Alloy Digest ◽  
1996 ◽  
Vol 45 (7) ◽  
Keyword(s):  
Heat Treatment ◽  
Fracture Toughness ◽  
Physical Properties ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
High Shock ◽  
Unusual Combination ◽  
Versatile Tool ◽  
Shock Resistance

Abstract Crucible S7 is a chromium/molybdenum tool steel developed to produce the unusual combination of high shock resistance and toughness together with ease of machining and heat treatment. It is a versatile tool steel applicable for both hot and cold work shock applications. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on heat treating, machining, and joining. Filing Code: TS-543. Producer or source: Crucible Service Centers.

CRUCIBLE CPM REX 54 HS

Alloy Digest ◽  
2021 ◽  
Vol 70 (9) ◽  
Keyword(s):  
Wear Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tool Steel ◽  
Abrasion Resistance ◽  
High Speed ◽  
Heat Treating ◽  
Wear Properties ◽  
Red Hardness

Abstract Crucible CPM Rex 54 HS is a cobalt-bearing high speed tool steel that is produced by the proprietary Crucible Particle Metallurgy (CPM) process. It combines the wear properties of the popular high vanadium M4 grade with the red hardness of the cobalt-bearing M35/Crucible CPM Rex 45 HS grades. Crucible CPM Rex 54 HS may be used as an upgrade for improved red hardness over M3 or M4 without giving up the abrasion resistance, or as an upgrade for improved wear resistance over M35 or Crucible CPM Rex 45 HS without giving up the red hardness. This datasheet provides information on composition, physical properties, microstructure, hardness, and elasticity. It also includes information on wear resistance as well as heat treating and surface treatment. Filing Code: TS-818. Producer or source: Crucible Industries LLC.

JESSOP-SAVILLE JO. SPECIAL

Alloy Digest ◽  
1967 ◽  
Vol 16 (7) ◽  
Keyword(s):  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Abrasion Resistance ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Extrusion Dies ◽  
Temperature Performance ◽  
Red Hardness

Abstract Jessop-Saville JO. Special is a basic hot work tool steel exhibiting good red-hardness and abrasion resistance at elevated temperatures. It is recommended for forging and extrusion dies. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance as well as heat treating, machining, and joining. Filing Code: TS-195. Producer or source: Jessop-Saville Ltd, Brightside Works.

AL-7

Alloy Digest ◽  
1975 ◽  
Vol 24 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Temperatures ◽  
Tool Steel ◽  
Cold Work ◽  
Heat Treating ◽  
General Purpose ◽  
Good Resistance

Abstract AL-7 is a general-purpose air-hardening tool steel having exceptional toughness coupled with good resistance to softening at moderately high temperatures. This combination of properties makes it suitable for many hot-work and cold-work applications. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: TS-282. Producer or source: Allegheny Ludlum Corporation.

RED CUT SUPERIOR J

Alloy Digest ◽  
1983 ◽  
Vol 32 (1) ◽  
Keyword(s):  
Physical Properties ◽  
Surface Treatment ◽  
High Speed ◽  
Elevated Temperatures ◽  
Heat Treating ◽  
Good Resistance ◽  
Die Steel ◽  
Red Hardness

Abstract RED CUT SUPERIOR J is a tungsten-type of hot-work tool and die steel; in fact, it is the 18 tungsten-4 chromium-1 vanadium high-speed composition with carbon lowered to provide more toughness. It is characterized by high red hardness and good resistance to abrasion. It is recommended for applichations in which hardness must be maintained at elevated temperatures. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: TS-410. Producer or source: Teledyne Vasco.

AISI TYPE H26

Alloy Digest ◽  
1975 ◽  
Vol 24 (12) ◽  
Keyword(s):  
Tool Steel ◽  
High Speed ◽  
Elevated Temperatures ◽  
Cold Work ◽  
Heat Treating ◽  
Liquid Cooling ◽  
Steel Mills ◽  
Aisi Type ◽  
Red Hardness ◽  
High Degree

Abstract AISI Type H26 hot-work tool steel is the 18 tungsten-4 chromium-1 vanadium high-speed composition with lowered carbon to provide a high-degree of toughness. It has high red hardness and good resistance to abrasion. It is preferable to the conventional hot-work tool steels for applications in which higher hardness must be maintained at elevated temperatures. It is also recommended in cold-work that involve long runs, but should not be used where liquid cooling is required. This datasheet provides information on composition, physical properties, hardness, and elasticity as well as fracture toughness. It also includes information on forming, heat treating, and machining. Filing Code: TS-294. Producer or source: Tool steel mills.

Sign in / Sign up

Export Citation Format

Share Document