CARMO

Alloy Digest ◽  
2002 ◽  
Vol 51 (3) ◽  
Keyword(s):  
Heat Treatment ◽  
Tensile Properties ◽  
Induction Hardening ◽  
Heat Treating ◽  
The Press ◽  
Short Run ◽  
Hot Rolled ◽  
Large Press

Abstract CARMO is the prehardened version of CALMAX (see Alloy Digest TS-177, March 1966). It is particularly suitable for flame and induction hardening of large press work tooling where excessive distortion after heat treatment is likely and also for prototype or very short run tooling. Its good weld-ability means that minor weld repairs can be carried out in the press. CARMO/CALMAX can be supplied in various finishes including the hot-rolled, rough-machined, and fine-machined executions. This datasheet provides information on composition, hardness, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-597. Producer or source: Böhler Uddeholm N.A.

CONDULOY

Alloy Digest ◽  
1953 ◽  
Vol 2 (10) ◽  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Age Hardening ◽  
Beryllium Copper ◽  
Hardening Heat Treatment

Abstract CONDULOY is a low beryllium-copper alloy containing about 1.5% nickel. It responds to age-hardening heat treatment for improved mechanical properties. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on casting, heat treating, machining, and joining. Filing Code: Cu-11. Producer or source: Brush Beryllium Company.

UNS A02960

Alloy Digest ◽  
1987 ◽  
Vol 36 (12) ◽  
Keyword(s):  
Heat Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Age Hardening ◽  
Casting Alloy ◽  
Passenger Cars ◽  
Temperature Performance ◽  
Mold Casting ◽  
Railway Passenger ◽  
Hardening Heat Treatment

Abstract UNS No. A02060 is an aluminum-mold casting alloy that responds to an age-hardening heat treatment. It is recommended for applications that require a combination of high tensile properties and good machinability. Among its many uses are fuel pump bodies, aircraft fittings and seat frames for railway passenger cars. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on high temperature performance as well as casting, heat treating, machining, and joining. Filing Code: Al-285. Producer or source: Various aluminum companies.

ALUMINUM 296.0

Alloy Digest ◽  
1982 ◽  
Vol 31 (11) ◽  
Keyword(s):  
Heat Treatment ◽  
Shear Strength ◽  
Tensile Properties ◽  
Heat Treating ◽  
Age Hardening ◽  
Casting Alloy ◽  
Permanent Mold ◽  
Temperature Performance ◽  
Mold Casting ◽  
Hardening Heat Treatment

Abstract ALUMINUM 296.0 is an aluminum permanent-mold casting alloy that responds to an age-hardening heat treatment. It is recommended for applications that require a combination of high tensile properties and good machinability. Among its many uses are fuel pump bodies, aircraft fittings and seat frames for railway passengers cars. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on high temperature performance as well as casting, heat treating, machining, and joining. Filing Code: Al-241. Producer or source: Various aluminum companies. See also Alloy Digest Al-261, October 1985.

ALX ALLOY

Alloy Digest ◽  
1963 ◽  
Vol 12 (1) ◽  
Keyword(s):  
Heat Treatment ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Speed ◽  
Heat Treating ◽  
Temperature Performance ◽  
Cobalt Base

Abstract ALX is a composition of nonferrous materials with a cobalt base containing chromium, tungsten and carbon. This alloy is commonly supplied in the cast-to-shape form, having an as-cast hardness of Rockwell C60-62 and requiring no further heat treatment. ALX is also supplied as cast tool bit material and is useful where conventional high-speed steels or carbides do not function effectively. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as casting, forming, heat treating, and machining. Filing Code: Co-35. Producer or source: Allegheny Ludlum Corporation.

ALUMINUM 319.0

Alloy Digest ◽  
1985 ◽  
Vol 34 (5) ◽  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Rear Axle ◽  
Heat Treating ◽  
General Purpose ◽  
Temperature Performance

Abstract ALUMINUM 319.0 is a general-purpose foundry alloy that is moderately responsive to heat treatment. It has excellent casting characteristics and good mechanical properties. Among its many uses are crankcases, housings, engine parts, typewriter frames and rear-axle housings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as creep and fatigue. It also includes information on low and high temperature performance as well as casting, heat treating, machining, and joining. Filing Code: Al-256. Producer or source: Various aluminum companies.

BRUSH ALLOY 10

Alloy Digest ◽  
1968 ◽  
Vol 17 (5) ◽  
Keyword(s):  
Heat Treatment ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Age Hardening ◽  
Resistance Welding Electrodes ◽  
Hardening Heat Treatment

Abstract BRUSH Alloy 10 is a low beryllium, cobalt-bearing copper alloy offering an excellent combination of strength, toughness and conductivity due to an age-hardening heat treatment. It is recommended for springs, clutch rings, resistance welding electrodes and tips, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, joining, and surface treatment. Filing Code: Cu-187. Producer or source: Brush Beryllium Company.

SAE 1053

Alloy Digest ◽  
1977 ◽  
Vol 26 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Carbon Steel ◽  
Physical Properties ◽  
Tensile Properties ◽  
Induction Hardening ◽  
High Strength ◽  
Heat Treating ◽  
Agricultural Machinery ◽  
Hand Tools ◽  
Steel Mills

Abstract SAE 10053 is an oil or water-hardening machinery and tool steel for applications where a shallow-hardening steel of high strength with moderate toughness meets the requirements. It is commonly used for parts where induction hardening or austempering are employed. SAE 1053 is recommended for agricultural machinery and tools, hand tools, shafts, springs and heavy-machinery parts. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: CS-70. Producer or source: Carbon steel mills.

VIBRO

Alloy Digest ◽  
1962 ◽  
Vol 11 (9) ◽  
Keyword(s):  
Heat Treatment ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
High Toughness ◽  
Temperature Performance ◽  
Steel Industries

Abstract Vibro is a special shock resisting steel of the chromium type which on heat treatment develops an exceptional combination of good hardness and high toughness. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: TS-123. Producer or source: Continental Copper & Steel Industries Inc..

COOPER ALLOY 14S

Alloy Digest ◽  
1964 ◽  
Vol 13 (7) ◽  
Keyword(s):  
Heat Treatment ◽  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Corrosion Resistant ◽  
Temperature Performance ◽  
Corrosion Resistant Alloy

Abstract Cooper Alloy 14S is an abrasion, heat and corrosion resistant alloy steel containing 12% chromium. It can be hardened by heat treatment. It is recommended for pumps and valves in the cast form. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: SS-158. Producer or source: Cooper Alloy Corporation.

AISI 8627

Alloy Digest ◽  
1980 ◽  
Vol 29 (12) ◽  
Keyword(s):  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Alloy Steel ◽  
Heat Treating ◽  
Heavy Duty ◽  
Good Strength ◽  
Steel Mills ◽  
Hot Rolled ◽  
Strength And Toughness

Abstract AISI 8627 is an alloy steel of moderate-to-good hardenability for carburizing and other applications. When carburized, its core has good strength and toughness, and it is recommended for heavy-duty applications such as gears, shafts, cams, and machinery parts. Also, it can be used in the hot-rolled, normalized or water-quenched-and-tempered condition without carburizing. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: SA-379. Producer or source: Alloy steel mills and foundries.

Sign in / Sign up

Export Citation Format

Share Document