scholarly journals Comparative Investigation of PhysicoChemical Properties of Two Varieties of Palm Kernel Oil in Use in Ethno Medicine

2020 ◽  
Vol 12 (12) ◽  
pp. 11-14
Author(s):  
Edwin N. Oguegbulu ◽  
Henry Nwadibia
2013 ◽  
Author(s):  
Nor Rabbi'atul 'Adawiyah Norzali ◽  
Khairiah Haji Badri ◽  
Ishak Ahmad

2016 ◽  
Vol 78 (11-2) ◽  
Author(s):  
Norizzah Abd Rashid ◽  
Nur Azimah Kamarulzaman ◽  
Zaliha Omar

Palm oil (PO) and palm kernel oil (PKO) have different chemical composition and physical properties. Both oils have limited application in their natural form. To widen their commercial values, PO and PKO were modified by blending and subsequently followed by interesterification (IE). Interesterification is the rearrangement of fatty acids within and among different triacylglycerols, using enzyme or chemical as the catalysts. Palm oil with iodine value (IV) of 52.6 and PKO (IV = 17.5) were mixed in different ratios from 25:75 to 75:25 (%wt/wt) at 25% increment. The blends were subjected to chemical and enzymatic interesterification using sodium methoxide and Lipozyme TL IM as catalysts, respectively. The effects of chemical and enzymatic interesterification on the triacylglycerols (TAG) composition, thermal properties, solid fat content (SFC) and slip melting point (SMP) were investigated.  Chemical interesterification (CIE) caused significant changes in the TAG composition of the oil blend compared to enzymatic interesterification (EIE). This changes led to a significantly higher (p<0.05) SMP for the chemically-interesterified than the enzymatically-interesterified blends. The differential scanning calorimetry (DSC) melting thermograms confirmed that harder product with higher final complete melting temperature was obtained from the chemically-interesterified blends. Similar SFC profiles for all oil blends were observed with steep SFC slopes for blend with high proportion of PKO. Chemical interesterification reduced the eutectic interactions that occurred at 5 to 25°C in the non-interesterified and enzymatically-interesterified blends. Thus, CIE caused significant changes in physicochemical properties of the PO and PKO blends compared to EIE. Results from this study could improve the existing PO and PKO properties and widen their usage in food and non-food applications.


2014 ◽  
Vol 6 (5) ◽  
pp. 205-207 ◽  
Author(s):  
Amira Amira ◽  
P. Olaniyi ◽  
O.O. Babalola ◽  
Oyediran A. Mary

Author(s):  
Niamketchi Gilles Léonce ◽  
Adama Coulibaly ◽  
Fofana Ibrahim ◽  
Sidibé Daouda ◽  
Kouamé Désiré ◽  
...  

Aims: This study aims to evaluate the physicochemical properties of palm kernel oil extracted from traditional varieties in the Mountain district, West region of Côte d’Ivoire. Study Design: Palm kernels were collected from women crude palm oil producers in three departments of the western part of Cote d'Ivoire. In each department, 50 kg of palm kernel were purchased per supplier. Place and Duration of Study: This study was carried out June to September 2017.The collected almonds of palm kernels were carried out at the Biochemistry and Food Sciences Laboratory of the Félix Houphouët-Boigny University, Abidjan. Methodology: The palm kernel oils were extracted by maceration and their physicochemical properties were determinate using standard methods. Results: The results obtained show that the values for the physicochemical parameters of palm kernel oils from the three departments were similar and fell in those of the standards of Codex Alimentarius 2019. However, physicochemical parameters statistically vary (P<0.05) between the departments. The yields of oils extracted fluctuated between 39.64 ± 2.14 % and 52.26 ± 1.16 %. The refractive index ranges between 1.453 ± 0.01 and 1.454 ± 0.002. The relative density varies between 0.90 and 0.91. The level of insoluble impurities ranged from 0.06 to 0.09 %. The moisture and volatile matter content varied between 0.62 ± 0.05 to 1.94 ± 0.07 %. The acid value and free fat acid percentage varies from 6.37 ± 0.65 to 8.54 ± 0.57 mg KOH/g and 3.20 ± 0.31 to 4.29 ± 0.28 %, the saponification value ranges between 216.02 ± 8.96 mg KOH/g and 248.16 ± 2.40 mgKOH/g, iodine value varies from 17.52 ± 0.43and 19.05 ± 0.95 g of iodine per 100 g of fat and peroxide value range between 6.02 ± 1.13 to 8.38 ± 1.00meq O2 kg of fat. The study of the lipid composition of these fats showed significant presence of fatty acid and unsaponifiable. The major fatty acids are lauric acid (50.50 - 51.00 %), myristic acid (18.35 - 18.80 %) and oleic acid (12.80 - 13.92 %). Conclusion: Given the results, palm kernel oils from the three departments exhibited good physicochemical properties, a clear indication that palm kernel oil could be used as edible and non-edible products in many homes and at various levels of industries in Côte d'Ivoire. There is limited information available about palm kernel oil from the western region of Côte d'Ivoire now and this study systematically researched on it, which can provide useful information for Ivorian oil palm industry.


2019 ◽  
Vol 7 (4.14) ◽  
pp. 249
Author(s):  
Norizzah Abd Rashid ◽  
Fatin Nurhanis Jumari ◽  
Zaliha Omar

Palm kernel oil (PKO) and palm kernel olein (PKOo) have limited application due to rapid crystallisation properties and excessive foaming during heating, respectively. In this study, a series of PKO and PKOo blends were prepared at different concentration and analysed for slip melting point (SMP), solid fat content (SFC), triacylglycerols (TAGs) composition, thermal and morphological properties. The addition of 90% RBDPKOo caused the SMP to decrease from 27.8°C to 23.80°C. All the samples show steep SFC melting profile from 0°C to 30°C. The onset crystallisation temperature of RBDPKO was delayed with the addition of 90% PKOo from 9.73°C to 5.80°C and totally melted at lower melting temperatures.  It was observed that the addition of RBDPKOo caused the crystals to be spherulitic, scattered and less aggregated with each other. The addition of RBDPKOo reduced the compositions of the main TAG of RBDPKO such as LaLaLa, LaLaM and CLaLa. Therefore, through blending the physicochemical properties of the RBDPKO and RBDPKOo could be changed. Hence, their applications in food could be widened.  


Author(s):  
Mohd Jumain Jalil ◽  
Aliff Farhan Mohd Yamin ◽  
Mohd Saufi Md Zaini ◽  
Veronique Gloria V. Siduru ◽  
Norhashimah Morad ◽  
...  

Background: Studies pertaining to the epoxidation of fatty acids, garnered much interest in recent years due to the rising demand of eco-friendly epoxides derived from vegetable oils. Methods: Epoxide is an important chemical precursor for the production of alcohols, glycols and polymers, like polyesters and epoxy resin. Epoxidation is the name given to the reaction when the double bonds are converted into epoxide. Results: Temperature at 55oC was used as a reference material in the epoxide process, as it produces a high yield epoxide being 88%. The kinetic rate of epoxidized palm kernel oil, k was obtained to be k11= 0.5125, k12= 0.05045, k21= 0.03185, k41= 0.01 and k51= 0.01243. Conclusion: Hence, by fitting the result with the experimental work and simulation, the summation of error being stimulated by I-sight simulation was 0.731116428 and the correlation between the experimental and simulation data was 0.925544.


2021 ◽  
Author(s):  
Samuel O. Egbuna ◽  
Ukeh J. Nwachukwu ◽  
Chinedu M. Agu ◽  
Christain O. Asadu ◽  
Bernard Okolo

Sign in / Sign up

Export Citation Format

Share Document