scholarly journals Simulation of vehicle tires based on the finite element method

2020 ◽  
Vol 1 (3) ◽  
pp. 65-74
Author(s):  
S.B. Tomashevskiy ◽  
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Element Model ◽  
Tire Model ◽  
The Finite Element Method ◽  
Discrete Elements ◽  
Model Based ◽  
Wheeled Vehicles ◽  
Wheel Disk ◽  
Element Method

Modeling of wheeled vehicles is one of the main directions of development and practical appli-cation of software systems based on modeling the dynamics of body systems. In this paper, a tech-nique for analyzing a vehicle tire by the finite element method under various types of loading is considered in order to identify the parameters of its simplified dynamic models. Based on the finite element method, a refined tire model is created. It takes into account the complex geometric shape of various tire parts, their material properties, as well as the contact interaction of the tire with the support. The efficiency of this model was tested, both when performing static calculations of the stress-strain state of the tire from the action of an external load, and when solving the generalized eigenvalue problem. The great influence of external load on the natural frequencies and vibration modes of the tire is confirmed. One of the possible applications of the considered method of finite element modeling of a tire is the performance of refined calculations of the dynamics of wheeled vehicles in the “Universal Mechanism” software package. There are several variants of dynamic tire models that can be used to study the dynamics of off-road wheeled vehicles, including a model based on the method of discrete elements and a model based on the method of coupled substruc-tures. A model based on the method of discrete elements represents a number of absolutely solid bodies-particles, connected to each other and by a wheel disk by a set of elastic-dissipative ele-ments. Each particle of this model has three linear degrees of freedom relative to the wheel disk. The results of calculations of the refined finite element model of the tire are necessary to identify the mass and elastic-dissipative properties of this dynamic tire model. In the model based on the method of connected substructures, the elastic displacements of the tire are represented as the sum of the admissible shapes of the elastic body. Static and natural vibration modes are used as permis-sible forms of an elastic body, calculated using a refined finite element model of the tire.

scholarly journals COMPARISON OF SAW BLADE NATURAL FREQUENCIES AND CRITICAL SPEEDS USING CSAW AND FINITE ELEMENT ANALYSIS

2011 ◽  
Author(s):  
J. Poirier ◽  
P. Radziszewski
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Natural Frequencies ◽  
Element Model ◽  
The Finite Element Method ◽  
Element Analysis ◽  
Saw Blade ◽  
Circular Saws ◽  
The Finite Element Model ◽  
Element Method

The natural frequencies of circular saws limit the operating speeds of the saws. Current industry methods of increasing natural frequency include pretensioning, where plastic deformation is induced into the saw. To better model the saw, the finite element model is compared to current software for steel saws; C-SAW, a software program that calculates frequencies for stiffened circular saws. Using C-SAW and the finite element method the results are compared and the finite element method is validated for steel saws.

Pipeline On-Bottom Stability Analysis Based on FEM Model

2011 ◽  
Author(s):  
Yong Bai ◽  
Zhimeng Yu
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Design Procedure ◽  
Element Model ◽  
The Finite Element Method ◽  
Fem Model ◽  
Engineering Software ◽  
Calculation Results ◽  
Pipeline Design ◽  
Element Method

Pipeline on-bottom stability is one of the sophisticated problems in subsea pipeline design procedure. Due to the uncertainty of the pipe-soil interaction and environment loads, including wave, current, or earthquake, etc., it is classified as the typical nonlinear problem. The Finite Element Method is introduced into pipeline engineering several years ago. More and more special engineering software such as AGA, PONDUS are available in market. However, when doing a project, some abnormal data was found when compared the DnV calculation results and AGA. In order to know the behavior of pipeline on seabed under wave and current load, finite element method – ABAQUS is introduced to do this analysis. The ABAQUS/explicit is used to simulate 600s pipeline dynamic response. The pipeline is supposed to be exposed on seabed and the selected seabed model is large enough to avoid the edge effect. ABAQUS calculation results are compared with the requirements in DnV rules to verify the validity of finite element model.

scholarly journals Study on the Effect of Different Delamination Defects on Buckling Behavior of Spar Cap in Wind Turbine Blade

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Jianwei Li ◽  
Jinghua Wang ◽  
Leian Zhang ◽  
Xuemei Huang ◽  
Yongfeng Yu
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Wind Turbine ◽  
Turbine Blades ◽  
Reference Value ◽  
Element Model ◽  
Theory And Practice ◽  
The Finite Element Method ◽  
Buckling Behavior ◽  
Element Method

Delamination is detrimental to the composite materials, and it may occur in the manufacturing process of the unidirectional laminate of the spar cap in wind turbine blades. This paper studies the effect of different delamination defects on the strength of the unidirectional laminate. The finite element model of laminate with different delamination areas and delamination heights is established using solid elements. The eigenvalues of laminates have different parameters calculated based on the finite element method. The final coupon test is used to verify the conclusions of simulation results. The finite element method presented in this study shows excellent capabilities to predict the buckling behavior of the laminate. The buckling eigenvalue of tested laminate is negatively correlated with the delamination area and positively correlated with the delamination height under the edgewise load. The S11, which is too high at the boundary of the delamination region, plays a significant role in buckling failure. It has a particular reference value for testing the laminate of blade both in theory and practice.

Finite Element Research on Damping of Viscoelastic Free Layer Damping Sheet

2014 ◽  
Vol 472 ◽  
pp. 56-61
Author(s):  
Yuan Chao He ◽  
Wen Lin Chen ◽  
Shi Wei Sun ◽  
Li Na Hao
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Loss Factor ◽  
Element Model ◽  
The Finite Element Method ◽  
Free Layer ◽  
Modal Strain Energy ◽  
Modal Strain Energy Method ◽  
The Finite Element Model ◽  
Element Method

Based on modal strain energy method, the paper discusses viscoelastic free layer damping sheet, establishes the finite element model of it and obtains the natural frequencies and loss factor. Then the paper calculates the loss factor of viscoelastic free layer damping structure with engineering empirical formula, and compares the result with that obtained by finite element method. By comparing the two results, it indicates that the finite element method is effective in analyzing this kind of problems.

scholarly journals Application of Finite Element Method for Analysis of Nanostructures

2017 ◽  
Vol 11 (2) ◽  
pp. 116-120 ◽  
Author(s):  
Jozef Bocko ◽  
Pavol Lengvarský
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Element Model ◽  
Geometrical Parameters ◽  
The Finite Element Method ◽  
Beam Elements ◽  
Stiffness Properties ◽  
Force Displacement ◽  
The Finite Element Model ◽  
Element Method

AbstractThe paper deals with application of the finite element method in modelling and simulation of nanostructures. The finite element model is based on beam elements with stiffness properties gained from the quantum mechanics and nonlinear spring elements with force-displacement relation are gained from Morse potential. Several basic mechanical properties of structures are computed by homogenization of nanostructure, e.g. Young's modulus, Poisson's ratio. The problems connecting with geometrical parameters of nanostructures are considered and their influences to resulting homogenized quantities are mentioned.

An Approach to Vehicle Pull Using a Tire Finite Element Model

1992 ◽  
Vol 20 (4) ◽  
pp. 212-229 ◽  
Author(s):  
H. Murakoshi ◽  
H. Ide ◽  
S. Nishihata
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Finite Element Model ◽  
Element Model ◽  
The Finite Element Method ◽  
Element Method

Abstract A vehicle sometimes drifts in a straight lane. This is caused by wind, road contour, suspension alignment, and tire properties. In this paper, characteristic tire properties which affect vehicle pull are defined and analyzed by the finite element method. The effect of tire construction and tread pattern on these characteristics are discussed.

A Design Methodology for Tracked Vehicles Using Experimentally Identified Modal Parameters and the Finite Element Method

1994 ◽  
Author(s):  
M. K. Sarwar ◽  
A. A. Shabana ◽  
Toshikazu Nakanishi
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Finite Element Model ◽  
Design Methodology ◽  
Element Model ◽  
Modal Parameters ◽  
The Finite Element Method ◽  
Tracked Vehicle ◽  
Made In ◽  
Element Method

Abstract The objective of this study is to develop a design procedure that integrates multibody techniques, the finite element method, and experimental modal analysis techniques. Multibody techniques and the finite element method are first used to develop and numerically test the performance of the proposed design. Based on this computer analysis, a prototype model can be built. The vibration modal parameters of this model can be determined experimentally and used with general purpose multibody computer programs to evaluate the performance of the design. The obtained numerical results can be compared with the results obtained previously using multibody techniques and the finite element method. Adjustments can then be made in the finite element description in order to obtain a more realistic model that compares well with the experimental data. Using the more realistic finite element model, design modifications can be made in order to improve the performance of the design model. The use of the design methodology proposed in this paper is demonstrated using a flexible tracked vehicle model that consists of fifty four interconnected bodies. In this model, the nonlinear contact forces that describe the interaction between the track links and the vehicle components and the ground are developed. The nonlinear dynamic equations of the vehicle are developed in terms of a coupled set of reference and chassis elastic modal coordinates. The flexibility of the chassis of the tracked vehicle is described using the finite element method and experimentally identified modal parameters. The results obtained using the finite element model are compared with the results obtained using experimentally identified modal parameters.

Sign in / Sign up

Export Citation Format

Share Document