Interval Algebra and Region Connection Calculus for Ontological Spatiotemporal Assembly Product Motion Knowledge Representation

2021 ◽  
pp. 1-18
Author(s):  
Md Tarique Hasan Khan ◽  
Frédéric Demoly ◽  
Kyoung Yun Kim
Keyword(s):  
Knowledge Representation ◽  
Semantic Knowledge ◽  
Added Value ◽  
Topological Spaces ◽  
Product Knowledge ◽  
Interval Algebra ◽  
Assembly Design ◽  
Knowledge Models ◽  
Region Connection Calculus

Over the last decades, noticeable efforts have been made to construct design knowledge during the detailed geometric definition phase systematically. However, physical products exhibit functional behaviors, which explain that they evolve over space and time. Hence, there is a need to extend assembly product knowledge towards the spatiotemporal dimension to provide more realistic knowledge models in assembly design. Systematic semantic knowledge representation via ontology enables designers to understand the anticipated product’s behavior in advance. In this article, Interval Algebra (IA) and Region Connection Calculus (RCC) are investigated to formalize and construct ontological spatiotemporal assembly product motion knowledge. IA is commonly used to represent the temporality between two entities, while RCC is more appropriate to represent the ‘part-to-part’ relationships of two topological spaces. This paper discusses the roles of IA and RCC and presents a case study of a nutcracker assembly model’s behavior. The assembly product motion ontology with the aid of IA and RCC is evaluated using a task-based approach. The evaluation shows the added value of the developed ontology compared to others published in the literature.

A Semantic Representation for Process-Oriented Knowledge Management Based on Functionblock Domain Models Supporting Distributed and Collaborative Production Planning

2015 ◽  
Author(s):  
Benjamin Gernhardt ◽  
Franz Miltner ◽  
Tobias Vogel ◽  
Holger Brocks ◽  
Matthias Hemmje ◽  
...  
Keyword(s):  
Semantic Web ◽  
Knowledge Representation ◽  
Production Planning ◽  
Semantic Knowledge ◽  
Semantic Integration ◽  
Product Knowledge ◽  
Simulation And Optimization ◽  
Knowledge Based ◽  
Process Oriented ◽  
Machine Readable

Semantic knowledge representation, management, sharing, access, and re-use approaches can support collaborative production planning in a flexible and efficient as well as an effective way. Therefore, semantic-technology based representations of Collaborative Production Process Planning (CAPP) knowledge integrated into a machine readable process formalization is a key enabling factor for sharing such knowledge in cloud-based semantic-enabled knowledge repositories supporting CAPP scenarios as required in the CAPP4SMES project [1]. Beyond that, Small and Medium Enterprises (SMEs) as represented in CAPP4SMES request for a standardized CAPP-oriented product-knowledge- and production-feature representation that can be achieved by applying function-block based knowledge representation models. Semantic Web- and at the same time Cloud-based technologies, tool suites and application solutions which are based on process-oriented semantic knowledge representation methodologies such as Process-oriented Knowledge-based Innovation Management (German: Wissens-basiertes Prozesess-orientiertes Innovationsmanagement, WPIM) [2] can satisfy these needs, supporting the semantic integration, management, access and re-use in a machine readable and integrated representation of distributed CAPP knowledge that is shared within a cloud-based centralized semantic-enabled knowledge repository. Furthermore semantic knowledge representation and querying add value to knowledge-based and computer-aided re-use of such knowledge within CAPP activities and, finally, pave the way towards further automating planning, simulation and optimization support in a semantic web for CAPP.

scholarly journals UML knowledge model for measurement process including uncertainty of measurement

2021 ◽  
Vol 12 ◽  
pp. 26
Author(s):  
Priyanka Bharti ◽  
QingPing Yang ◽  
Alistair B. Forbes ◽  
Yacine Koucha
Keyword(s):  
Knowledge Representation ◽  
Manufacturing Industry ◽  
Object Oriented ◽  
Semantic Knowledge ◽  
Measurement Process ◽  
Measurement Technology ◽  
Measurement Systems ◽  
Calibration Uncertainty ◽  
Measurement Planning

Measurement technology has made an enormous progress in the last decade. With the advent of knowledge representation, various object-oriented models for measurement systems have been developed in the past. Most common limitations of all these models were not incorporating the uncertainty in the measurement process. In this paper, we proposed an object-oriented model depicting the information and knowledge flow in the measurement process, including the measurement uncertainty. The model has three major object classes, namely measurement planning, measurement system and analysis & documentation. These are further classified into sub-classes and relationships amongst them. Attributes and operations are also defined within the classes. This gives a practical and conceptual view of knowledge in the form of object-model for measurement processes. A case study is presented which evaluates the uncertainty of the measurement of a 100 mm gauge block, using both Type A and Type B evaluation methods of the GUM approach.This case study is very similar to the evaluation of calibration uncertainty of CMM. This model can be converted into semantic knowledge representation such as ontology of measurement process domain. Other use of this model is to support the quality engineering in manufacturing industry and research.

Bottom Hole Assembly Design Enhancement Successfully Eliminate Hole Problems and Reduce Significant Drilling Time : South S Field Case Study

2020 ◽  
Author(s):  
Y. D. Mulia
Keyword(s):  
Contact Area ◽  
Cost Savings ◽  
Assembly Design ◽  
Drilling Performance ◽  
Bottom Hole ◽  
Unconsolidated Sand ◽  
Bottom Hole Assembly ◽  
Drilling Parameter ◽  
Drilling Time

For S-15 and S-14 wells at South S Field, drilling of the 12-1/4” hole section became the longest tangent hole section interval of both wells. There were several challenges identified where hole problems can occur. The hole problems often occur in the unconsolidated sand layers and porous limestone formation sections of the hole during tripping in/out operations. Most of the hole problems are closely related to the design of the Bottom Hole Assembly (BHA). In many instances, hole problems resulted in significant additional drilling time. As an effort to resolve this issue, a new BHA setup was then designed to enhance the BHA drilling performance and eventually eliminate hole problems while drilling. The basic idea of the enhanced BHA is to provide more annulus clearance and limber BHA. The purpose is to reduce the Equivalent Circulating Density (ECD,) less contact area with formation, and reduce packoff risk while drilling through an unconsolidated section of the rocks. Engineering simulations were conducted to ensure that the enhanced BHA were able to deliver a good drilling performance. As a results, improved drilling performance can be seen on S-14 well which applied the enhanced BHA design. The enhanced BHA was able to drill the 12-1/4” tangent hole section to total depth (TD) with certain drilling parameter. Hole problems were no longer an issue during tripping out/in operation. This improvement led to significant rig time and cost savings of intermediate hole section drilling compared to S-15 well. The new enhanced BHA design has become one of the company’s benchmarks for drilling directional wells in South S Field.

scholarly journals Architectural and Urban Attractiveness of Small Towns: A Case Study of Polish Coastal Cittaslow Towns on the Pomeranian Way of St. James

Land ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 724
Author(s):  
Alicja K. Zawadzka
Keyword(s):  
Small Towns ◽  
Urban Life ◽  
Added Value ◽  
Development Policies ◽  
Quality Of Urban Life ◽  
Size Criterion ◽  
The Town ◽  
Modern Technologies

The paper presents the results of a study on the attractiveness to tourists and natives of the cultural qualities of coastal towns on The Pomeranian Way of St. James that are members of the Cittaslow network. Attention to the quality of urban life is inscribed in the development policies of towns applying to join the Cittaslow movement. In order to join the network (apart from the size criterion), towns need to meet a minimum of 50% plus one of the 72 criteria grouped into seven categories. One of the category is Quality of Urban Life Policy, so the towns applying to join Cittaslow commit themselves to actions aimed at improving the quality of urban life. The study on the attractiveness of cultural qualities of towns to tourists and natives was conducted using the author’s BRB method, whose added value is its universality and the possibility to study small towns regardless of their membership in the Cittaslow network. BRB is an acronym that stands for BUILDINGS, RELATIONSHIPS, BALANCE, and comprises three scopes of activities: BUILDINGS (iconic building and important sites where the inhabitants and the tourists are present); RELATIONSHIPS (the visual effects of the relations between the inhabitants and the town) and BALANCE (solutions that implement modern technologies). This method enables identification of places that are important to the inhabitants, where urban life takes place and which are often created with the involvement of the inhabitants. These are often the same spaces as those that attract tourists and perhaps stimulate them the desire to visit the town again (BRB—be right back). The aim of the BRB method is shown the attractiveness of small towns. The study has shown that the characteristic feature of Polish Cittaslow towns is their diversity: the architectural attractiveness of three towns is high both to tourists and natives. On the other hand, the urban attractiveness of the examined towns is an insufficient.

scholarly journals Investigating temperature breaks in the summer fruit export cold chain: A case study

2013 ◽  
Vol 7 (1) ◽  
Author(s):  
Heinri W. Freiboth ◽  
Leila Goedhals-Gerber ◽  
F. Esbeth Van Dyk ◽  
Malcolm C. Dodd
Keyword(s):  
Temperature Variation ◽  
South African ◽  
Temperature Data ◽  
Added Value ◽  
Cold Chain ◽  
The South ◽  
Export Supply ◽  
Cold Store ◽  
Summer Fruit

There is concern in the South African fruit industry that a large amount of fruit and money is lost every season due to breaks in the fruit export cold chain. The possibility of a large percentage of losses in a significant sector of the economy warranted further investigation. This article attempted to highlight some of the possible problem areas in the cold chain, from the cold store to the port, by analysing historic temperature data from different fruit export supply chains of apples, pears and grapes. In addition, a trial shipment of apples was used to investigate temperature variation between different pallets in the same container. This research has added value to the South African fruit industry by identifying the need to improve operational procedures in the cold chain.

Design workshops in the age of climate change

2017 ◽  
Vol 6 (1) ◽  
pp. 48-63 ◽  
Author(s):  
Jeroen De Waegemaeker ◽  
Eva Kerselaers ◽  
Maarten Van Acker ◽  
Elke Rogge
Keyword(s):  
Climate Adaptation ◽  
Real Life ◽  
Water System ◽  
Added Value ◽  
Policy Makers ◽  
Content Type ◽  
Regional Project ◽  
Design Workshop ◽  
Specific Barriers

Purpose As policy makers address the issue of climate adaptation, they are confronted with climate-specific barriers: a long-term horizon and a high degree of uncertainty. These barriers also hamper the development of spatial planning for climate adaptation. So how can spatial planners encompass these barriers and steer the general debate on climate adaptation? The paper aims to discuss these issues. Design/methodology/approach This research analyzes the strengths and weaknesses of an international design workshop on climate adaptation, and drought issues in particular. Design workshops are originally an educational setting but they are increasingly employed as a tool to explore alternative futures on a complex, real-life design problem. The case study illustrates how climate-specific barriers emerged throughout the design workshop and clarifies how they were encompassed by the participating design students. Findings The research clarifies the added value of a design workshop on climate adaptation. The paper highlights specific promising characteristics of the design workshop: the visualization of future adaptation challenges and the current water system, the focus on a regional project instead of sectoral adjustments and the integration of the adaptation challenge with other socio-economic goals. In the case study Flanders, however, the necessary participation of climate experts and policy makers of other domains proved challenging. Originality/value The paper argues that a design workshop has the potential to enrich the debate and policy work on climate adaptation. In many countries with low-planning tradition, however, additional tools are needed to help set the “adaptation agenda.”

Sign in / Sign up

Export Citation Format

Share Document