scholarly journals Double multiple stream tube theory coupled with dynamic stall and wake correction for aerodynamic investigation of vertical axis wind turbine

2020 ◽  
Vol 23 (4) ◽  
pp. 771-780
Author(s):  
Anh Ngoc VU ◽  
Ngoc Son Pham
Keyword(s):  
Wind Turbine ◽  
Shape Function ◽  
Vertical Axis ◽  
Transformation Method ◽  
Aerodynamic Performance ◽  
Dynamic Stall ◽  
Power Coefficient ◽  
Vertical Axis Wind Turbine ◽  
Stream Tube ◽  
Aerodynamic Investigation

This study describes an effectively analytic methodology to investigate the aerodynamic performance of H vertical axis wind turbine (H-VAWT). An in-house code based on double multiple stream tube theory (DMST) coupled with dynamic stall and wake correction is implemented to estimate the power coefficient. Design optimization of airfoil shape is conducted to study the influences of the dynamic stall and turbulent wakes. Airfoil shape is universally investigated by using the Class/Shape function transformation method. The airfoil study shows that the upper curve tends to be less convex than the lower curve in order to extract more energy of the wind upstream and generate less drag of the blade downstream. The optimal results show that the power coefficient increases by 6.5% with the new airfoil shape.

Numerical Analysis of a Rooftop Vertical Axis Wind Turbine

2011 ◽  
Author(s):  
N. Cristobal Uzarraga-Rodriguez ◽  
A. Gallegos-Mun˜oz ◽  
J. Manuel Riesco A´vila
Keyword(s):  
Numerical Analysis ◽  
Wind Turbine ◽  
Numerical Study ◽  
Vertical Axis ◽  
Turbine Rotor ◽  
Aerodynamic Performance ◽  
Power Coefficient ◽  
Vertical Axis Wind Turbine ◽  
Sliding Mesh ◽  
Mesh Model

A numerical analysis of a rooftop vertical axis wind turbine (VAWT) for applications in urban area is presented. The numerical simulations were developed to study the flow field through the turbine rotor to analyze the aerodynamic performance characteristics of the device. Three different blade numbers of wind turbine are studied, 2, 3 and 4, respectively. Each one of the models was built in a 3D computational model. The effects generated in the performance of turbines by the numbers of blades are considered. A Sliding Mesh Model (SMM) capability was used to present the dimensionless form of coefficient power and coefficient moment of the wind turbine as a function of the wind velocity and the rotor rotational speed. The numerical study was developed in CFD using FLUENT®. The results show the aerodynamic performance for each configuration of wind turbine rotor. In the cases of Rooftop rotor the power coefficient increases as the blade number increases, while in the case of Savonius rotor the power coefficient decrease as the blades number increases.

scholarly journals 2D CFD Simulation Study on the Performance of Various NACA Airfoils

CFD letters ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 38-50
Author(s):  
Mark Jason Thomas Loutun ◽  
Djamal Hissein Didane ◽  
Mohd Faizal Mohideen Batcha ◽  
Kamil Abdullah ◽  
Mas Fawzi Mohd Ali ◽  
...  
Keyword(s):  
Energy Source ◽  
Wind Turbine ◽  
Computational Models ◽  
Cfd Simulation ◽  
Turbine Blades ◽  
Vertical Axis ◽  
Aerodynamic Performance ◽  
The Other ◽  
Power Coefficient ◽  
Vertical Axis Wind Turbine

The wind is an energy source that has the properties of a clean, free, and readily available energy source. However, the efficiency of the existing rotors used to harness wind power is still not satisfactory. Thus, in this current study, the development and aerodynamic performance investigation of ten NACA airfoils comprising of five symmetrical and five non-symmetrical airfoils have been analyzed through the computational fluids dynamic (CFD) simulation approach. The main motive of this study was to investigate the aerodynamic performance of NACA airfoils to be used on a vertical axis wind turbine (VAWT), which will assist in further understanding the physics of the interaction between airflow and the wind turbine blades. The simulation was performed using two-dimensional computational models based on an unsteady state K-omega Shear Stress Transport (SST) turbulence model. This study covers a parametric study based on the variations of tip-speed ratios and constant wind velocity. The aerodynamic performances are evaluated in terms of torque, torque coefficient, and also power coefficient. The performance of NACA0018 was found to be the best among the other airfoils with a power coefficient of 0.3. NACA0010 displayed the lowest power coefficient among the other airfoils but had a more extensive operating range compared to the other airfoils. However, for non-symmetrical NACA airfoils, NACA2421 scored the highest power coefficient, followed by NACA4412. It was also found that most of the non-symmetrical NACA airfoils can operate at a higher range of tip-speed ratios compared to the symmetrical NACA airfoils.

scholarly journals Dynamic Stall of a Vertical-Axis Wind Turbine and Its Control Using Plasma Actuation

Energies ◽  
2019 ◽  
Vol 12 (19) ◽  
pp. 3738 ◽  
Author(s):  
Lu Ma ◽  
Xiaodong Wang ◽  
Jian Zhu ◽  
Shun Kang
Keyword(s):  
Wind Turbine ◽  
Tangential Force ◽  
Vertical Axis ◽  
Dynamic Stall ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Vertical Axis Wind Turbine ◽  
Dbd Plasma ◽  
Tip Speed Ratio ◽  
Plasma Actuation

In this paper, a dynamic stall control scheme for vertical-axis wind turbine (VAWT) based on pulsed dielectric-barrier-discharge (DBD) plasma actuation is proposed using computational fluid dynamics (CFD). The trend of the wind turbine power coefficient with the tip speed ratio is verified, and the numerical simulation can describe the typical dynamic stall process of the H-type VAWT. The tangential force coefficient and vorticity contours of the blade are compared, and the regular pattern of the VAWT dynamic stall under different tip speed ratios is obtained. Based on the understanding the dynamic stall phenomenon in flow field, the effect of the azimuth of the plasma actuation on the VAWT power is studied. The results show that the azimuth interval of the dynamic stall is approximately 60° or 80° by the different tip speed ratio. The pulsed plasma actuation can suppress dynamic stall. The actuation is optimally applied for the azimuthal position of 60° to 120°.

Effect of blade pitching on power coefficient of small-scale vertical axis wind turbine at different tip speed ratios

2019 ◽  
Vol 44 (3) ◽  
pp. 313-324 ◽  
Author(s):  
Ramesh K Kavade ◽  
Pravin M Ghanegaonkar
Keyword(s):  
Wind Turbine ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Small Scale ◽  
Tube Model ◽  
Vertical Axis Wind Turbine ◽  
Stream Tube

This article analyses the effect of best blade pitching positions on the power coefficient of vertical axis wind turbine at different tip speed ratios. Analysis of the power coefficient of the vertical axis wind turbine is carried out for optimized six blade pitching curves. The first three pitching curves are designed for the tip speed ratios below 1.5 (0 <  λ < 1.5) and other three are for the tip speed ratios in the range of 0 <  λ < 3. The double multiple stream tube model is used for the present analysis. The results are compared between the optimized and sinusoidal pitching curves. It is concluded that the best optimized pitch position blade method improves the power coefficient than the typical sinusoidal blade pitching in the range of tip speed ratios 0 <  λ < 3.

Swept Blade for Performance Improvement on a Vertical Axis Wind Turbine

2020 ◽  
Author(s):  
Jie Su ◽  
Yaoran Chen ◽  
Dai Zhou ◽  
Zhaolong Han ◽  
Yan Bao
Keyword(s):  
Wind Turbine ◽  
Wind Farm ◽  
Vertical Axis ◽  
Aerodynamic Performance ◽  
Power Coefficient ◽  
Vertical Axis Wind Turbine ◽  
Static Pressure Distribution ◽  
Low Wind Speed ◽  
Turbine Wake ◽  
Wind Turbine Wake

Abstract The vertical axis wind turbine (VAWT) is considered an important device to utilize the renewable and sustainable wind energy. However, the relatively lower power coefficient has hampered its development. Therefore, this paper attempts to investigate the effect of swept blade employed in a VAWT on the enhancement in aerodynamic performance. A series of swept blades were studied in a small VAWT rotor, and the RANS SST k-ω turbulence model was utilized to simulate the flow field. The numerical model was validated against experimental data, and the aerodynamic performance was investigated with respect to force coefficients, vorticity distribution, static pressure distribution, and wind turbine wake, respectively. The results indicated that the swept blade could effectively increase power outputs by about 20% for the wind turbine. By reducing the drag coefficient, a high lift-drag ratio was achieved. And this configuration prevented the blade from suffering severe dynamic stall. Besides, the swept blade changed the distribution of low wind speed area in the wind turbine wake, which should be considered in the wind farm. It was concluded that this work provided a new way for the practical design and optimization of wind turbine.

Aerodynamic and aeroacoustic performance investigations on modified H-rotor Darrieus wind turbine

2021 ◽  
pp. 0309524X2110039
Author(s):  
Amgad Dessoky ◽  
Thorsten Lutz ◽  
Ewald Krämer
Keyword(s):  
Wind Turbine ◽  
High Speed ◽  
Cfd Simulation ◽  
Vertical Axis ◽  
3D Models ◽  
Power Coefficient ◽  
Design Parameters ◽  
Second Phase ◽  
Vertical Axis Wind Turbine ◽  
Guide Vanes

The present paper investigates the aerodynamic and aeroacoustic characteristics of the H-rotor Darrieus vertical axis wind turbine (VAWT) combined with very promising energy conversion and steering technology; a fixed guide-vanes. The main scope of the current work is to enhance the aerodynamic performance and assess the noise production accomplished with such enhancement. The studies are carried out in two phases; the first phase is a parametric 2D CFD simulation employing the unsteady Reynolds-averaged Navier-Stokes (URANS) approach to optimize the design parameters of the guide-vanes. The second phase is a 3D CFD simulation of the full turbine using a higher-order numerical scheme and a hybrid RANS/LES (DDES) method. The guide-vanes show a superior power augmentation, about 42% increase in the power coefficient at λ = 2.75, with a slightly noisy operation and completely change the signal directivity. A remarkable difference in power coefficient is observed between 2D and 3D models at the high-speed ratios stems from the 3D effect. As a result, a 3D simulation of the capped Darrieus turbine is carried out, and then a noise assessment of such configuration is assessed. The results show a 20% increase in power coefficient by using the cap, without significant change in the noise signal.

Dynamic Stall Control on a Vertical-Axis Wind Turbine Using Plasma Actuators

AIAA Journal ◽  
2014 ◽  
Vol 52 (2) ◽  
pp. 456-462 ◽  
Author(s):  
David Greenblatt ◽  
Amos Ben-Harav ◽  
Hanns Mueller-Vahl
Keyword(s):  
Wind Turbine ◽  
Vertical Axis ◽  
Dynamic Stall ◽  
Plasma Actuators ◽  
Vertical Axis Wind Turbine ◽  
Stall Control

Modeling dynamic stall of a straight blade vertical axis wind turbine

2015 ◽  
Vol 57 ◽  
pp. 144-158 ◽  
Author(s):  
K.M. Almohammadi ◽  
D.B. Ingham ◽  
L. Ma ◽  
M. Pourkashanian
Keyword(s):  
Wind Turbine ◽  
Vertical Axis ◽  
Dynamic Stall ◽  
Vertical Axis Wind Turbine ◽  
Straight Blade

Numerical Study of Pitch Angle on H-Type Vertical Axis Wind Turbine

2012 ◽  
Vol 499 ◽  
pp. 259-264
Author(s):  
Qi Yao ◽  
Ying Xue Yao ◽  
Liang Zhou ◽  
S.Y. Zheng
Keyword(s):  
Wind Turbine ◽  
Pitch Angle ◽  
Numerical Study ◽  
Vertical Axis ◽  
Azimuth Angle ◽  
Power Coefficient ◽  
Cfd Model ◽  
Vertical Axis Wind Turbine ◽  
Sliding Mesh ◽  
Mesh Technique

This paper presents a simulation study of an H-type vertical axis wind turbine. Two dimensional CFD model using sliding mesh technique was generated to help understand aerodynamics performance of this wind turbine. The effect of the pith angle on H-type vertical axis wind turbine was studied based on the computational model. As a result, this wind turbine could get the maximum power coefficient when pitch angle adjusted to a suited angle, furthermore, the effects of pitch angle and azimuth angle on single blade were investigated. The results will provide theoretical supports on study of variable pitch of wind turbine.

Sign in / Sign up

Export Citation Format

Share Document