scholarly journals Assessing the current status and proposed solution of municipal solid waste management in Pleiku City, Gia Lai Province

2020 ◽  
Vol 4 (3) ◽  
pp. 715-727
Author(s):  
Nguyen Tri Quang Hung ◽  
Dang Xuan Toan ◽  
Nguyen Minh Ky
Keyword(s):  
Waste Management ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Waste Treatment ◽  
Solid Waste Management ◽  
Total Solid ◽  
Current Status ◽  
Municipal Solid Waste Management ◽  
Treatment Technology ◽  
Solid Waste Treatment

Solid waste management is one of the most important challenges for the local administration in Pleiku city. The study on current assessment and proposing solid waste control solutions was con-ducted in Pleiku city, Gia Lai province. In general, the large volume of the municipal solid waste caused pollution and loss of ecological beauty - case study in Pleiku city. This paper investigated the total solid of waste volume which was increasing in periods from 2012 to 2016 with 35,386; 38,689; 43,243; 46,900 and 50,737 tons per year, respectively. The amount of solid waste was col-lected mainly from households and they was equal to the highest rate of 78.7%. Regarding to prediction by 2030, the volume of municipal solid waste tends to increase with 361.186 tons per day. The solid waste was buried in a landfill and used a large land area, but it just can be used in a short time. In addition, the volume and composition of municipal solid waste were relevant to the MBT-CD.08 technology's standard. This researching will be contributed to the decision-making on the selection of solid waste treatment technology in Pleiku city following their trends such as the sustainable development and the high benefits. The MBT-CD.08 technology are a useful solution, high feasibility and will be saved costs related to the solid waste treatment.

Towards Integrated Municipal Solid Waste Management: A Case of Urumqi, China

2014 ◽  
Vol 878 ◽  
pp. 3-14 ◽  
Author(s):  
Bin Guo ◽  
Ya Xuan Liu
Keyword(s):  
Waste Management ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Waste Treatment ◽  
Solid Waste Management ◽  
Current Status ◽  
Municipal Solid Waste Management ◽  
Fundamental Research ◽  
Rapid Industrialization ◽  
Barriers And Challenges

The rapid industrialization, continuous economic development, as well as increasing urban population and peoples living standards in Urumqi have resulted in a great increase of the total generated amount of municipal solid waste (MSW). Urumqi government strives to improve its municipal solid waste management (MSWM), and the MSW safe disposal rate was already up to 92.9% in 2011. This study presents an detailed overview on current MSWM practice in Urumqi municipality, including MSW characteristics and current status of MSW generation, collection, transportation and final disposal. It shows that more than 80% of MSW was final disposed by landfill and current landfill based MSWM system lack of effectiveness and efficiency. The major barriers and challenges that inhibit effective and efficient MSWM are imperfectness and inefficient enforcement of relevant policies, inappropriate waste treatment fee system, backward technology, insufficient public education and participation, as well as lack of fundamental research. Finally, to overcome such barriers, we propose a detailed integrated MSWM system to facilitate MSWM in Urumqi.

scholarly journals PENGELOLAAN SAMPAH PLASTIK DI SALATIGA: Praktik, dan tantangan

2019 ◽  
Vol 17 (1) ◽  
pp. 90
Author(s):  
Berliana Anggun Septiani ◽  
Dian Mita Arianie ◽  
Via Fide Aditya Andi Risman ◽  
Widhi Handayani ◽  
Istiarsi Saptuti Sri Kawuryan
Keyword(s):  
Waste Management ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Waste Treatment ◽  
Solid Waste Management ◽  
Plastic Waste ◽  
Municipal Solid Waste Management ◽  
Waste Production ◽  
The Government

The increase of solid waste production is a general problem in municipality, particularly of plastic waste. The durability, light-weight, anticorrosiveness, and inexpensiveness properties of plastic make it favorable to be used in daily life, including in Salatiga. However, plastic is one of some non-biodegradable materials that could lead to soil and water pollution as it contains toxic compounds such as aromatic hydrocarbons, phthalates, and organochlorine. Various studies in municipal solid waste management have been conducted. While those studies often applied various approaches separately, researches in regard to the role of stakeholders in municipal solid waste management are very limited. This study aims to explain the plastic waste management in Salatiga based on the role of the corresponding stakeholders. This qualitative study shows that there are four stakeholders who were involved in municipal plastic waste management in Salatiga. They were the households who generate wastes, the scavengers who sorts the wastes, Bank Sampah and collectors who have the same role in order to collect the wastes and treat the plastic wastes through reusing or recycling processes, and the government. Currently, efforts in waste treatment in Salatiga are focused on the system of collecting-tranferring-disposal mode, waste treatment by reuse and recycle processing, and landfilling. Reducing plastic consumption must take into account the sociocultural aspect and environmental awareness, as the people still interested to use plastic instead of using other materials in substitution. Finally, the role of government is central to educate the community in term of sorting activities and reducing waste production, build the capacity of Bank Sampah, and manage the role of scavengers and collectors. Other alternatives include creating synergy between the collectors and Bank Sampah, as well as ensuring final treatment of the unprocessed wastes disposed by collectors and Bank Sampah. 

scholarly journals Current Status of Municipal Solid Waste Management Practise in FCT Abuja

2013 ◽  
Vol 5 (6) ◽  
pp. 295-304 ◽  
Author(s):  
Kadafa Adati Ayuba ◽  
Latifah Abd Manaf ◽  
Abdullah Ho Sabrina ◽  
Sulaiman Wan Nur Azmin
Keyword(s):  
Waste Management ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Solid Waste Management ◽  
Current Status ◽  
Municipal Solid Waste Management

scholarly journals GIS Application for Estimating the Current Status of Municipal Solid Waste Management System: Case Study of Chandigarh City, India

Our Nature ◽  
1970 ◽  
Vol 9 (1) ◽  
pp. 26-33 ◽  
Author(s):  
A. Khajuria ◽  
T. Matsui ◽  
T. Machimura
Keyword(s):  
Waste Management ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Solid Waste Management ◽  
Assessment Model ◽  
Current Status ◽  
Municipal Solid Waste Management ◽  
Gis Application ◽  
Total Cost ◽  
Transport Path

The population growth in many urban cities and its urban activities in developing countries have resulted in an increased generation rate of municipal solid waste(MSW), an important issue. In the process of municipal solid waste management (MSWM) system in which, collection activities contributed the most of total cost that is paid for MSW collection activities by city’s citizen; and transport activities are required 60-70% of total cost that is the total expenditures spent on the transport, transfer, disposal and treatment of MSW by city authorities. Hence optimization of routing system, systematization of collection, transport and transfer activities is the important components for an effective MSWM system. This article describes the current problems and the improvement of the management activities in a city of Chandigarh. An integrated MSWM assessment model is proposed and used as a decision support tool for daily efficient operations such as collection/ transport path management, load balancing within vehicles, fuel consumption management by using GIS application. In addition, a simple optimal routing model is proposed to achieve the minimum cost/distance/time efficient collection and transport path for MSWM.DOI: http://dx.doi.org/10.3126/on.v9i1.5729

An overview of municipal solid waste management in Jaipur city, India - Current status, challenges and recommendations

2021 ◽  
Vol 152 ◽  
pp. 111703
Author(s):  
Kishan Kumar Prajapati ◽  
Monika Yadav ◽  
Rao Martand Singh ◽  
Priti Parikh ◽  
Nidhi Pareek ◽  
...  
Keyword(s):  
Waste Management ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Solid Waste Management ◽  
Current Status ◽  
Municipal Solid Waste Management ◽  
Jaipur City

Technologies for municipal solid waste management: Current status, challenges, and future perspectives

Chemosphere ◽  
2021 ◽  
pp. 132403
Author(s):  
Shamshad Khan ◽  
Raheel Anjum ◽  
Syed Turab Raza ◽  
Nazir Ahmed Bazai ◽  
Muhammad Ihtisham
Keyword(s):  
Waste Management ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Solid Waste Management ◽  
Current Status ◽  
Municipal Solid Waste Management ◽  
Future Perspectives

scholarly journals Skenario Pengembangan Sistem Pengelolaan Sampah Kabupaten Pasaman Barat dengan Pendekatan Skala Pengolahan Sampah di Tingkat Kawasan dan Kota

2019 ◽  
Vol 4 (1) ◽  
pp. 444
Author(s):  
Rizki Aziz ◽  
Taufiq Ihsan ◽  
Ade Septia Permadani
Keyword(s):  
Waste Management ◽  
Solid Waste ◽  
Waste Treatment ◽  
Solid Waste Management ◽  
Treatment Approach ◽  
Total Solid ◽  
Landfill Site ◽  
Waste Minimization ◽  
Solid Waste Treatment ◽  
The City

<p>This study aims to analyze the existing conditions of the solid waste management system in Pasaman Barat Regency and discuss the alternative development of solid waste management systems with a solid waste treatment approach At the regional and municipal scale as a solution to the problem of solid waste management in  Pasaman Barat Regency. From this study it is known that the level of existing solid waste management services was  only 9.13% of total solid waste generated. The problems faced in solid waste management in Pasaman Barat Regency were still high levels of unserved solid waste, inadequate operational facilities and infrastructure for solid waste management, uneven handling of solid waste in service area coverage and the low practice of waste minimization and utilization. The solid waste man-agement system in Pasaman West Regency in the future can apply a combination of solid waste manage-ment approaches at the regional level based on Solid Waste Treatment Station with reduce-reuse-recycle approach (TPS 3R) in domestic areas and treatment at the city level based on Intergrated Solid Waste Treatment Station (TPST) at the landfill site, with the development of the system planned for 15 years, solid waste volume taken into the landfill site can be reduced by 22.40%</p>

scholarly journals The Current Status and Future Potential of Biogas Production from Canada’s Organic Fraction Municipal Solid Waste

Energies ◽  
2022 ◽  
Vol 15 (2) ◽  
pp. 475
Author(s):  
Omid Norouzi ◽  
Animesh Dutta
Keyword(s):  
Anaerobic Digestion ◽  
Waste Management ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Solid Waste Management ◽  
Biogas Production ◽  
Organic Wastes ◽  
Current Status ◽  
Municipal Solid Waste Management ◽  
Organic Fraction

With the implementation of new policies supporting renewable natural gas production from organic wastes, Canada began replacing traditional disposal methods with highly integrated biogas production strategies. Herein, data from published papers, Canadian Biogas Association, Canada’s national statistical agency, and energy companies’ websites were gathered to gain insight into the current status of anaerobic digestion plants in recovering energy and resource from organic wastes. The availability of materials prepared for recycling by companies and local waste management organizations and existing infrastructures for municipal solid waste management were examined. Governmental incentives and discouragements in Canada and world anaerobic digestion leaders regarding organic fraction municipal solid waste management were comprehensively reviewed to identify the opportunities for developing large-scale anaerobic digestion in Canada. A range of anaerobic digestion facilities, including water resource recovery facilities, standalone digesters, and on-farm digesters throughout Ontario, were compared in terms of digestion type, digester volume, feedstock (s), and electricity capacity to better understand the current role of biogas plants in this province. Finally, technology perspectives, solutions, and roadmaps were discussed to shape the future in terms of organic fraction municipal solid waste management. The findings suggested that the biogas industry growth in Canada relies on provincial energy and waste management policies, advanced technologies for diverting organic waste from landfills, improving biogas yield using existing pretreatment methods, and educating farmers regarding digester operations.

Sign in / Sign up

Export Citation Format

Share Document