scholarly journals A genetic algorithm based partition generation and optimization method for finite element problems

Author(s):  
Lubomir Jirasek

A two-step partitioning algorithm for FE meshes is proposed in this work for the purposes of time savings. A direct method based on the concept of 'separateness' was applied first, followed by a partition optimization process that used a Genetic Algorithm (GA). A total of 9 applications were evaluated to demonstrate the durability, versatility, and effectiveness of this partitioning algorithm with respect to interface node count and subdomain load balance. Beyond this wingbox optimization problem was performed on a single processor using a GA to demonstrate the possible time savings of the method. With a 30% decrease in compute time witnessed, it can be said with confidence that the propose partitioning algorithm was a success.

2021 ◽  
Author(s):  
Lubomir Jirasek

A two-step partitioning algorithm for FE meshes is proposed in this work for the purposes of time savings. A direct method based on the concept of 'separateness' was applied first, followed by a partition optimization process that used a Genetic Algorithm (GA). A total of 9 applications were evaluated to demonstrate the durability, versatility, and effectiveness of this partitioning algorithm with respect to interface node count and subdomain load balance. Beyond this wingbox optimization problem was performed on a single processor using a GA to demonstrate the possible time savings of the method. With a 30% decrease in compute time witnessed, it can be said with confidence that the propose partitioning algorithm was a success.


2015 ◽  
Vol 783 ◽  
pp. 83-94
Author(s):  
Alberto Borboni

In this work, the optimization problem is studied for a planar cam which rotates around its axis and moves a centered translating roller follower. The proposed optimization method is a genetic algorithm. The paper deals with different design problems: the minimization of the pressure angle, the maximization of the radius of curvature and the minimization of the contact pressure. Different types of motion laws are tested to found the most suitable for the computational optimization process.


2012 ◽  
Vol 2012 ◽  
pp. 1-9 ◽  
Author(s):  
Hongbing Lian ◽  
András Faragó

In virtual private network (VPN) design, the goal is to implement a logical overlay network on top of a given physical network. We model the traffic loss caused by blocking not only on isolated links, but also at the network level. A successful model that captures the considered network level phenomenon is the well-known reduced load approximation. We consider here the optimization problem of maximizing the carried traffic in the VPN. This is a hard optimization problem. To deal with it, we introduce a heuristic local search technique called landscape smoothing search (LSS). This study first describes the LSS heuristic. Then we introduce an improved version called fast landscape smoothing search (FLSS) method to overcome the slow search speed when the objective function calculation is very time consuming. We apply FLSS to VPN design optimization and compare with well-known optimization methods such as simulated annealing (SA) and genetic algorithm (GA). The FLSS achieves better results for this VPN design optimization problem than simulated annealing and genetic algorithm.


2011 ◽  
Vol 299-300 ◽  
pp. 1217-1220
Author(s):  
Jian Ye Wan ◽  
Xin Jiang ◽  
Yun Peng Wang

According to handling route of assembly line of airbag optimization problem, handling path planning mathematical model is established. Based on natural coding genetic algorithm, combining with JH company assembly line of airbag layout and the actual situation of material handling, using MATLAB software to realize the genetic algorithm, production logistics fields materials handling route problem in the optimization method is put forward. To solve production enterprise assembly line material handling route optimization problem, and has certain directive role.


2015 ◽  
Vol 18 (1) ◽  
pp. 27-36
Author(s):  
Phu Duc Huynh ◽  
Tuong Quan Vo

Biomimetic robot is a new branch of researched field which is developing quickly in recent years. Some of the popular biomimetic robots are fish robot, snake robot, dog robot, dragonfly robot, etc. Among the biomimetic underwater robots, fish robot and snake robot are mostly concerned. In this paper, we study about an optimization method to find the design parameters of fish robot. First, we analyze the dynamic model of the 3-joint Carangiform fish robot by using Lagrange method. Then the Genetic Algorithm (GA) is used to find the optimal lengths’ values of fish robot’s links. The constraint of this optimization problem is that the values of fish robot’s links are chosen that they can make fish robot swim with the desired straight velocity. Finally, some simulation results are presented to prove the effectiveness of the proposed method


Author(s):  
Nataliya Gulayeva ◽  
Volodymyr Shylo ◽  
Mykola Glybovets

Introduction. As early as 1744, the great Leonhard Euler noted that nothing at all took place in the universe in which some rule of maximum or minimum did not appear [12]. Great many today’s scientific and engineering problems faced by humankind are of optimization nature. There exist many different methods developed to solve optimization problems, the number of these methods is estimated to be in the hundreds and continues to grow. A number of approaches to classify optimization methods based on various criteria (e.g. the type of optimization strategy or the type of solution obtained) are proposed, narrower classifications of methods solving specific types of optimization problems (e.g. combinatorial optimization problems or nonlinear programming problems) are also in use. Total number of known optimization method classes amounts to several hundreds. At the same time, methods falling into classes far from each other may often have many common properties and can be reduced to each other by rethinking certain characteristics. In view of the above, the pressing task of the modern science is to develop a general approach to classify optimization methods based on the disclosure of the involved search strategy basic principles, and to systematize existing optimization methods. The purpose is to show that genetic algorithms, usually classified as metaheuristic, population-based, simulation, etc., are inherently the stochastic numerical methods of direct search. Results. Alternative statements of optimization problem are given. An overview of existing classifications of optimization problems and basic methods to solve them is provided. The heart of optimization method classification into symbolic (analytical) and numerical ones is described. It is shown that a genetic algorithm scheme can be represented as a scheme of numerical method of direct search. A method to reduce a given optimization problem to a problem solvable by a genetic algorithm is described, and the class of problems that can be solved by genetic algorithms is outlined. Conclusions. Taking into account the existence of a great number of methods solving optimization problems and approaches to classify them it is necessary to work out a unified approach for optimization method classification and systematization. Reducing the class of genetic algorithms to numerical methods of direct search is the first step in this direction. Keywords: mathematical programming problem, unconstrained optimization problem, constrained optimization problem, multimodal optimization problem, numerical methods, genetic algorithms, metaheuristic algorithms.


2021 ◽  
Vol 33 (6) ◽  
pp. 1248-1254
Author(s):  
Takamichi Yuasa ◽  
◽  
Masato Ishikawa ◽  
Satoshi Ogawa

Hydraulic excavators are one type of construction equipment used in various construction sites worldwide, and their usage and scale are diverse. Generally, the work efficiency of a hydraulic excavator largely depends on human operation skills. If we can comprehend the experienced operation skills and utilize them for manual control assist, semi-automatic or automatic remote control, it would improve its work efficiency and suppress personnel costs, reduce the operator’s workload, and improve his/her safety. In this study, we propose a methodology to design efficient machine trajectories based on mathematical models and numerical optimization, focusing on ground-level excavation as a dominant task. First, we express its excavation trajectory using four parameters and assume the models for the amount of excavated soil and the reaction force based on our previous experiments. Next, we combine these models with a geometrical model for the hydraulic excavating machine. We then assign the amount of soil to a performance index preferably to be maximized and the amount of work to a cost index preferably to be minimized, both in the form of functions of the trajectory parameters, resulting in an optimization problem that trades them off. In particular, we formulate (1) a multi-objective optimization problem maximizing a weighted linear combination of the amount of soil and the amount of work as an objective function, and (2) a single-objective optimization problem maximizing the amount of soil under a given upper bound on the amount of work, so that we can solve these optimization problems using the genetic algorithm (GA). Finally, we conclude this paper by suggesting our notice on design methodology and discussing how we should provide the optimization method as mentioned above to the users who operate hydraulic excavators.


DYNA ◽  
2018 ◽  
Vol 85 (207) ◽  
pp. 168-173
Author(s):  
Neider Nadid Romero-Núñez ◽  
Rafael Eduardo Tuiran Villalba

In this work, an optimization method of a six - bars mechanism is proposed, which is formulated with natural coordinates easing the kinematic modeling, since it avoids use of transcendental functions. After the kinematic model is established, the optimization problem is formulated to be solved by using a genetic algorithm with real or continuous coding; thus, avoiding computation of highly complex derivatives. The relevance of this work lies on fact that an alternative method is offered to those dependent on angular parameters, where equations that model the mechanism, are complicated, even in the simplest mechanism.


Sign in / Sign up

Export Citation Format

Share Document