scholarly journals Construction of Genetic Map of Jute (Corchorus olitorius L.) Based on RAPD Markers

2009 ◽  
Vol 18 (2) ◽  
pp. 165-172 ◽  
Author(s):  
Samiul Haque ◽  
Nadim Ashraf ◽  
Selina Begum ◽  
R.H. Sarkar ◽  
Haseena Khan
Keyword(s):  
Linkage Map ◽  
Genetic Linkage ◽  
Rapd Markers ◽  
Genetic Linkage Map ◽  
Group Analysis ◽  
Basic Chromosome Number ◽  
Marker Density ◽  
Linkage Groups ◽  
Average Marker Density ◽  
Rapd Polymorphism

The first and preliminary genetic linkage map of the jute genome was constructed with RAPD markers using two parents (variety O-9897 and accession no. 1805) and their F2 populations. Linkage analysis at a LOD (Log of odds base 10) score of 3.0 and a maximum distance 50 cM revealed 18 linkage groups. Among the 18 linkage groups, 15 contained single locus and the remaining three groups 16, 17 and 18 contained 2, 11 and 12 loci, respectively. The three multi locus linkage groups varying in length from 15.9 - 241.7 cM, snapped a total length of 463.7 cM with an average marker density of 19.6 cM between adjacent markers. The basic chromosome number of Corchorus spp. is seven (2n = 14), so in saturated map, seven linkage groups should have been obtained to represent the genome. But for linkage group analysis, the effort was very limited and the total number of loci (40) was also low.  Key words: Jute, Linkage map, RAPD, Polymorphism D.O.I 10.3329/ptcb.v18i2.3647 Plant Tissue Cult. & Biotech. 18(2): 165-172, 2008 (December)

A genetic linkage map for Stevia rebaudiana

Genome ◽  
1999 ◽  
Vol 42 (4) ◽  
pp. 657-661 ◽  
Author(s):  
Y Yao ◽  
M Ban ◽  
J Brandle
Keyword(s):  
Linkage Map ◽  
Genetic Linkage ◽  
Rapd Markers ◽  
Genetic Linkage Map ◽  
Average Distance ◽  
Stevia Rebaudiana ◽  
Linkage Groups ◽  
Genome Map ◽  
High Level ◽  
Map Distance

To lay a foundation for molecular breeding efforts, the first genetic linkage map for Stevia rebaudiana has been constructed using segregation data from a pseudo test-cross F1 population. A total of 183 randomly amplified polymorphic DNA (RAPD) markers were analysed and assembled into 21 linkage groups covering a total distance of 1389 cM, with an average distance between markers of of 7.6 cM. The 11 largest linkage groups consisted of 4-19 loci, ranged in length from 56 to 174 cM, and accounted for 75% of the total map distance. Fifteen RAPD loci were found to be unlinked. From the 521 primers showing amplification products, 185 (35.5%) produced a total of 293 polymorphic fragments, indicating a high level of genetic diversity in stevia. Most of the RAPD markers in stevia segregated in normal Mendelian fashion.Key words: stevia, open-pollinated, genome map, RAPD.

Linkage of random amplified polymorphic DNA, isozyme and morphological markers in grasspea (Lathyrus sativus)

1999 ◽  
Vol 133 (4) ◽  
pp. 389-395 ◽  
Author(s):  
M. A. CHOWDHURY ◽  
A. E. SLINKARD
Keyword(s):  
Linkage Map ◽  
Genetic Linkage ◽  
Rapd Markers ◽  
Genetic Linkage Map ◽  
Average Distance ◽  
Random Amplified Polymorphic Dna ◽  
Lathyrus Sativus ◽  
Morphological Markers ◽  
Linkage Studies ◽  
Linkage Groups

We constructed a genetic linkage map of grasspea (Lathyrus sativus L.; 2n = 14) from 100 F2 individuals derived from a cross between PI 426891.1.3 and PI 283564c.3.2. A total of 71 RAPD, three isozyme and one morphological markers segregated in the F2 progeny. A small fraction of markers (12%) deviated significantly from the expected Mendelian ratio (1[ratio ]2[ratio ]1 or 3[ratio ]1). Out of 75 markers, 69 (one morphological, three isozyme and 65 RAPD markers) were assigned to 14 linkage groups comprising 898 cM. The average distance between two adjacent markers was 17·2 cM. The present linkage map will serve as a reference point for further linkage studies in grasspea.

A genetic linkage map of crested wheatgrass based on AFLP and RAPD markers

Genome ◽  
2012 ◽  
Vol 55 (4) ◽  
pp. 327-335 ◽  
Author(s):  
Xiaoxia Yu ◽  
Xiaolei Li ◽  
Yanhong Ma ◽  
Zhuo Yu ◽  
Zaozhe Li
Keyword(s):  
Molecular Markers ◽  
Linkage Map ◽  
Genetic Linkage ◽  
Rapd Markers ◽  
Genetic Linkage Map ◽  
Mapping Population ◽  
Gene Localization ◽  
Linkage Groups ◽  
Crested Wheatgrass ◽  
Map Distance

Using a population of 105 interspecific F2 hybrids derived from a cross between Agropyron mongolicum Keng and Agropyron cristatum (L.) Gaertn. ‘Fairway’ as a mapping population, a genetic linkage map of crested wheatgrass was constructed based on AFLP and RAPD molecular markers. A total of 175 markers, including 152 AFLP and 23 RAPD markers, were ordered in seven linkage groups. The map distance was 416 cM, with a mean distance of 2.47 cM between markers. The number of markers ranged from 13 to 46 in each linkage group and the length of groups ranged from 18 to 104 cM. The research found that 30 out of 175 molecular markers showed segregation distortion, accounting for 17% of all markers. This is the first genetic linkage map of crested wheatgrass. This map will facilitate gene localization, cloning, and molecular marker-assisted selection in the future.

scholarly journals A Combined Amplified Fragment Length Polymorphism and Randomly Amplified Polymorphism DNA Genetic Linkage Map of Mycosphaerella graminicola, the Septoria Tritici Leaf Blotch Pathogen of Wheat

Genetics ◽  
2002 ◽  
Vol 161 (4) ◽  
pp. 1497-1505
Author(s):  
Gert H J Kema ◽  
Stephen B Goodwin ◽  
Sonia Hamza ◽  
Els C P Verstappen ◽  
Jessica R Cavaletto ◽  
...  
Keyword(s):  
Molecular Markers ◽  
Linkage Map ◽  
Mating Type ◽  
Genetic Linkage ◽  
Rapd Markers ◽  
Genetic Linkage Map ◽  
Mycosphaerella Graminicola ◽  
Septoria Tritici ◽  
Biological Traits ◽  
Linkage Groups

Abstract An F1 mapping population of the septoria tritici blotch pathogen of wheat, Mycosphaerella graminicola, was generated by crossing the two Dutch field isolates IPO323 and IPO94269. AFLP and RAPD marker data sets were combined to produce a high-density genetic linkage map. The final map contained 223 AFLP and 57 RAPD markers, plus the biological traits mating type and avirulence, in 23 linkage groups spanning 1216 cM. Many AFLPs and some RAPD markers were clustered. When markers were reduced to 1 per cluster, 229 unique positions were mapped, with an average distance of 5.3 cM between markers. Because M. graminicola probably has 17 or 18 chromosomes, at least 5 of the 23 linkage groups probably will need to be combined with others once additional markers are added to the map. This was confirmed by pulsed-field gel analysis; probes derived from 2 of the smallest linkage groups hybridized to two of the largest chromosome-sized bands, revealing a discrepancy between physical and genetic distance. The utility of the map was demonstrated by identifying molecular markers tightly linked to two genes of biological interest, mating type and avirulence. Bulked segregant analysis was used to identify additional molecular markers closely linked to these traits. This is the first genetic linkage map for any species in the genus Mycosphaerella or the family Mycosphaerellaceae.

scholarly journals An EST-SSR based genetic linkage map and identification of QTLs for anthracnose disease resistance in water yam (Dioscorea alata L.)

2018 ◽  
Author(s):  
Ranjana Bhattacharjee ◽  
Christian O Nwadili ◽  
Christopher A Saski ◽  
Agre Paterne ◽  
Brian E. Scheffler ◽  
...  
Keyword(s):  
Linkage Map ◽  
Genetic Linkage ◽  
Genetic Linkage Map ◽  
Average Score ◽  
Dioscorea Alata ◽  
Marker Density ◽  
Linkage Groups ◽  
Anthracnose Disease ◽  
High Marker Density ◽  
Water Yam

AbstractWater yam (Dioscorea alata L.) is one of the most important food yams with wide geographical distribution in tropics. One of the major constraints to water yam production is anthracnose disease caused by a fungus, Colletotrichum gloesporioides (Penz.). There are no economically feasible solutions as chemical sprays or cultural practices, such as crop rotation are seldom convenient for smallholder farmers for sustainable control of the disease. Breeding for development of durable genetic resistant varieties is known to offer lasting solution to control endemic disease threats to crop production. However, breeding for resistance to anthracnose has been slow considering the biological constraints related to the heterozygous and vegetative propagation of the crop. The development of saturated linkage maps with high marker density, such as SSRs, followed by identification of QTLs can accelerate the speed and precision of resistance breeding in water yam. A total of 380 EST-SSRs were used to generate a saturated linkage map. About 60.19% of SSRs showed Mendelian segregation pattern, however, it had no effect on the construction of linkage map. All 380 EST-SSRs were mapped into 20 linkage groups covering a total length of 2559.66 cM, which agrees with the diploid nature (2n = 2x = 20) of the parents used in the cross. Majority of the markers were mapped on linkage group 1 comprising of 97 EST-SSRs. This is the first genetic linkage map of water yam constructed using EST-SSRs. QTL localization was based on phenotypic data collected over a 3-year period of inoculating the mapping population with the most virulent strain of C. gloeosporoides from West Africa. Using the mean permutation value of LOD scores as threshold value for declaring a putative QTL on all linkage groups, one QTL was consistently observed on linkage group (LG) 14 in all the three years and average score data. This QTL was found at position interval of 71.12 – 84.76 cM explaining 68.94% of the total phenotypic variation in the average score data. The high marker density allowed identification of QTLs and association for anthracnose disease, which could be validated in other mapping populations and used in marker-assisted breeding in D. alata improvement programmes.

Two genetic linkage maps of mungbean using RFLP and RAPD markers

2000 ◽  
Vol 51 (4) ◽  
pp. 415 ◽  
Author(s):  
C. J. Lambrides ◽  
R. J. Lawn ◽  
I. D. Godwin ◽  
J. Manners ◽  
B. C. Imrie
Keyword(s):  
Linkage Map ◽  
Segregation Distortion ◽  
Recombinant Inbred ◽  
Genetic Linkage ◽  
Rapd Markers ◽  
Rflp Markers ◽  
Linkage Maps ◽  
Linkage Groups ◽  
Genetic Linkage Maps ◽  
Map Distance

Two genetic linkage maps of mungbean derived from the cross Berken ACC 41 are reported. The F2 map constructed from 67 individuals consisted of 110 markers (52 RFLP and 56 RAPD) that grouped into 12 linkage groups. The linked markers spanned a total map distance of 758.3 cM. A recombinant inbred (RI) population derived from the 67 F2 individuals was used for the generation of an additional linkage map. The RI map, composed entirely of RAPD markers, consisted of 115 markers in 12 linkage groups. The linked markers spanned a total map distance of 691.7 cM. Using a framework set of RFLP markers, the F2 map was compared with another F2 mungbean map constructed in Minnesota. In general, the order of these markers was consistent between maps. Segregation distortion was observed for some markers. 14.5% (16/110) of mapped F2 markers and 24% (28/115) of mapped RI markers segregated with distorted ratios. Segregation distortion occurred in each successive generation after the F2 . The regions of distortion identified in the Australian maps did not coincide with regions of the Minnesota map.

scholarly journals Genetic Linkage Map of the Edible BasidiomycetePleurotus ostreatus

2000 ◽  
Vol 66 (12) ◽  
pp. 5290-5300 ◽  
Author(s):  
Luis M. Larraya ◽  
G�mer P�rez ◽  
Enrique Ritter ◽  
Antonio G. Pisabarro ◽  
Lucı́a Ramı́rez
Keyword(s):  
Linkage Map ◽  
Genetic Linkage ◽  
Gene Sequence ◽  
Genetic Linkage Map ◽  
Fragment Length Polymorphism ◽  
Individual Cell ◽  
Random Amplified Polymorphic Dna ◽  
Rrna Gene ◽  
Linkage Groups ◽  
Rrna Gene Sequence

ABSTRACT We have constructed a genetic linkage map of the edible basidiomycete Pleurotus ostreatus (var. Florida). The map is based on the segregation of 178 random amplified polymorphic DNA and 23 restriction fragment length polymorphism markers; four hydrophobin, two laccase, and two manganese peroxidase genes; both mating type loci; one isozyme locus (est1); the rRNA gene sequence; and a repetitive DNA sequence in a population of 80 sibling monokaryons. The map identifies 11 linkage groups corresponding to the chromosomes ofP. ostreatus, and it has a total length of 1,000.7 centimorgans (cM) with an average of 35.1 kbp/cM. The map shows a high correlation (0.76) between physical and genetic chromosome sizes. The number of crossovers observed per chromosome per individual cell is 0.89. This map covers nearly the whole genome of P. ostreatus.

Mapping of quantitative trait loci underlying resistance to cassava anthracnose disease

2015 ◽  
Vol 154 (7) ◽  
pp. 1209-1217 ◽  
Author(s):  
A. BOONCHANAWIWAT ◽  
S. SRAPHET ◽  
S. WHANKAEW ◽  
O. BOONSENG ◽  
D. R. SMITH ◽  
...  
Keyword(s):  
Quantitative Trait Loci ◽  
Linkage Map ◽  
Dna Markers ◽  
Quantitative Trait ◽  
Genetic Linkage ◽  
Genetic Linkage Map ◽  
Gene Annotation ◽  
Linkage Groups ◽  
Anthracnose Disease ◽  
Trait Loci

SUMMARYCassava (Manihot esculenta Crantz) is an economically important root crop in Thailand, which is ranked the world's top cassava exporting country. Production of cassava can be hampered by several pathogens and pests. Cassava anthracnose disease (CAD) is an important disease caused by the fungus Colletotrichum gloeosporioides f. sp. manihotis. The pathogen causes severe stem damage resulting in yield reductions and lack of stem cuttings available for planting. Molecular studies of cassava response to CAD will provide useful information for cassava breeders to develop new varieties with resistance to the disease. The current study aimed to identify quantitative trait loci (QTL) and DNA markers associated with resistance to CAD. A total of 200 lines of two F1 mapping populations were generated by reciprocal crosses between the varieties Huabong60 and Hanatee. The F1 samples were genotyped based on simple sequence repeat (SSR) and expressed sequence tag-SSR markers and a genetic linkage map was constructed using the JoinMap®/version3·0 program. The results showed that the map consisted of 512 marker loci distributed on 24 linkage groups with a map length of 1771·9 centimorgan (cM) and a mean interval between markers of 5·7 cM. The genetic linkage map was integrated with phenotypic data for the response to CAD infection generated by a detached leaf assay test. A total of three QTL underlying the trait were identified on three linkage groups using the MapQTL®/version4·0 program. Those DNA markers linked to the QTL that showed high statistically significant values with the CAD resistance trait were identified for gene annotation analysis and 23 candidate resistance genes to CAD infection were identified.

Sign in / Sign up

Export Citation Format

Share Document