scholarly journals Instrumento digital para medição de diâmetro florestal usando microcontrolador de baixo custo

2021 ◽  
Vol 10 (17) ◽  
pp. e70101724197
Author(s):  
Marina Sbardella ◽  
José Rafael Franco ◽  
Jonath Weríssimo da Silva Gomes ◽  
Alexandre Dal Pai ◽  
Enzo Dal Pai
Keyword(s):  
Eucalyptus Grandis

Este estudo descreve o processo de criação e montagem de um sistema para aquisição de dados de diâmetro à altura do peito de forma automatizada. A construção do protótipo móvel contou com os seguintes componentes: Arduino Pro mine, Módulo Cartão Micro SD, Sensor de Distância, Display LCD e Módulo Joystick. A montagem do sistema foi realizada em recipiente de plástico transparente. A validação dos dados foi feita por meio da comparação dos valores de diâmetro à altura do peito coletados com a suta convencional e o protótipo construído, por meio de medidas frontais e laterais de um plantio de Eucalyptus grandis. Os resultados demonstraram correlação linear positiva entre os dados obtidos pelo método convencional, utilizando suta mecânica e os dados obtidos atrás do protótipo confeccionado. O coeficiente de correlação de Pearson foi de 0,92 e 0,91 para as medidas frontal e lateral, respectivamente. O projeto se mostra viável para o uso dentro do setor florestal, principalmente em razão do baixo custo para confecção. No entanto, o protótipo apresentado necessita de maiores ajustes, principalmente em sua estrutura, a fim de facilitar o manuseio.

Variation of Soil Fauna Community in Eucalyptus grandis Plantation Before and After Felling Disturbance*

2011 ◽  
Vol 17 (1) ◽  
pp. 73-77
Author(s):  
Jiujin XIAO ◽  
Jian ZHANG ◽  
Yumei HUANG ◽  
Hongxing MA ◽  
Xudong LI
Keyword(s):  
Soil Fauna ◽  
Eucalyptus Grandis ◽  
Before And After

Influence of the applied pressure of the transducer on the propagation speed of the ultrasonic wave in wood

Holzforschung ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Edgar V.M. Carrasco ◽  
Rejane C. Alves ◽  
Mônica A. Smits ◽  
Vinnicius D. Pizzol ◽  
Ana Lucia C. Oliveira ◽  
...  
Keyword(s):  
Wave Propagation ◽  
Applied Pressure ◽  
Pressure Gauge ◽  
Eucalyptus Grandis ◽  
Propagation Speed ◽  
Ultrasonic Waves ◽  
Ultrasonic Speed ◽  
Wave Propagation Speed ◽  
Propagation Technique ◽  
Non Destructive

Abstract The non-destructive wave propagation technique is used to estimate the wood’s modulus of elasticity. The propagation speed of ultrasonic waves is influenced by some factors, among them: the type of transducer used in the test, the form of coupling and the sensitivity of the transducers. The objective of the study was to evaluate the influence of the contact pressure of the transducers on the ultrasonic speed. Ninety-eight tests were carried out on specimens of the species Eucalyptus grandis, with dimensions of 120 × 120 × 50 mm. The calibration of the pressure exerted by the transducer was controlled by a pressure gauge using a previously calibrated load cell. The robust statistical analysis allowed to validate the experimental results and to obtain consistent conclusions. The results showed that the wave propagation speed is not influenced by the pressure exerted by the transducer.

scholarly journals Characterization and use of a lignin sample extracted from Eucalyptus grandis sawdust for the removal of methylene blue dye

2021 ◽  
Vol 170 ◽  
pp. 375-389
Author(s):  
Alexandra Cemin ◽  
Fabrício Ferrarini ◽  
Matheus Poletto ◽  
Luis R. Bonetto ◽  
Jordana Bortoluz ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Eucalyptus Grandis ◽  
Blue Dye ◽  
Methylene Blue Dye

Prediction of the suitable distribution of Eucalyptus grandis in China and its responses to climate change

New Forests ◽  
2021 ◽  
Author(s):  
Linnan Ouyang ◽  
Roger J. Arnold ◽  
Shaoxiong Chen ◽  
Yaojian Xie ◽  
Shae He ◽  
...  
Keyword(s):  
Climate Change ◽  
Eucalyptus Grandis

scholarly journals Eucalypt Clonal Hybrid Influences the Carbon Amount of Below-Ground Biomass in Oxisol, Brazil

2020 ◽  
Vol 3 (1) ◽  
pp. 53
Author(s):  
Grasiele Dick ◽  
Humberto J. Eufrade-Junior ◽  
Mauro V. Schumacher ◽  
Gileno B. Azevedo ◽  
Saulo P. S. Guerra
Keyword(s):  
Carbon Concentration ◽  
Eucalyptus Grandis ◽  
Eucalyptus Camaldulensis ◽  
Eucalyptus Urophylla ◽  
Ground Biomass ◽  
Homogeneity Of Variances ◽  
Below Ground ◽  
Hybrid Eucalyptus ◽  
Carbon Determination ◽  
Hybrid Clones

The objective of this study was to evaluate whether there is an influence of different clonal hybrids of Eucalyptus urophylla on the carbon concentration and amount in below-ground biomass in trees cultivated in Oxisol, Brazil. Stumps and roots of three different eucalypt hybrid clones, AEC 0144, AEC 0223, and VM01, were selected, weighed immediately after being removed from the ground, and sampled for carbon determination and moisture content at the laboratory. The Shapiro-Wilk and Bartlett tests were used to evaluate data distribution and the homogeneity of variances, respectively. Analysis of variance (ANOVA) complemented by the Scott-Knott test was used to evaluate the effects of specie/hybrid on the below-ground biomass (dry matter) and carbon amount per stump. The hybrid type of Eucalyptus urophylla does not influence the carbon concentration; however, there is a difference in below-ground biomass production and carbon amount with it being higher for Eucalyptus urophylla × Eucalyptus camaldulensis when compared to the species Eucalyptus urophylla and hybrid Eucalyptus urophylla × Eucalyptus grandis.

scholarly journals Comparative Dynamics of Above-Ground Litter Production and Decomposition from Eucalyptus Grandis Hill ex Maiden and Pinus Taeda L., and Their Contribution to Soil Organic Carbon

Forests ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 349
Author(s):  
Andrés Baietto ◽  
Jorge Hernández ◽  
Amabelia del Pino
Keyword(s):  
Pinus Taeda ◽  
Decomposition Rate ◽  
Methodological Approach ◽  
Eucalyptus Grandis ◽  
Isotopic Analysis ◽  
Forest Litter ◽  
First Year ◽  
Litter Production ◽  
Forest Species ◽  
Pinus Taeda L

The replacement of native pasture by exotic commercial forest species is an infrequent situation worldwide. In these systems, a new component is introduced, forest litter, which constitutes one of the main ways of incorporating carbon into the soil–plant system. The present work seeks to establish a methodological approach to study the dynamics of litter production and decomposition in an integrated way. The general objective was to characterize and compare the litter production dynamics in 14-year-old Eucalyptus grandis Hill ex Maiden and Pinus taeda L. commercial plantations. During two years, seasonal evaluations of fall, decomposition and accumulation of litter were carried out in stands of both species. In turn, the contribution of carbon from forest species to the soil through isotopic analysis techniques was quantified. Litterfall in E. grandis showed maximums during the spring of the first year and in the spring and summer of the second. In P. taeda, the maximums occurred in summer of the first year and in autumn of the second. In relation to the decomposition rate, the results based on short periods of evaluation between 15 and 21 months did not show differences between species, nor for the different moments of beginning of the evaluation, obtaining average values of 0.0369 month−1 for E. grandis and 0.0357 month−1 for P. taeda. In turn, both the decomposition rate of the material as a whole and the estimates of accumulated biomass in equilibrium state did not show significant differences between the species. Additionally, there was a relevant incorporation of carbon into the soil by forest species, fundamentally in the first few centimeters, substituting an important proportion of the carbon inherited by the original cover of native pastures. Finally, it is necessary to specify that the scope of the findings obtained is greatly limited by the sample size used in this study.

scholarly journals Overexpressing the HD-Zip class II transcription factor EcHB1 from Eucalyptus camaldulensis increased the leaf photosynthesis and drought tolerance of Eucalyptus

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Keisuke Sasaki ◽  
Yuuki Ida ◽  
Sakihito Kitajima ◽  
Tetsu Kawazu ◽  
Takashi Hibino ◽  
...  
Keyword(s):  
Transcription Factor ◽  
Leaf Area ◽  
Leucine Zipper ◽  
Eucalyptus Grandis ◽  
Eucalyptus Camaldulensis ◽  
Class Ii ◽  
Cell Multiplication ◽  
Leaf Photosynthesis ◽  
Unit Leaf

Abstract Alteration in the leaf mesophyll anatomy by genetic modification is potentially a promising tool for improving the physiological functions of trees by improving leaf photosynthesis. Homeodomain leucine zipper (HD-Zip) transcription factors are candidates for anatomical alterations of leaves through modification of cell multiplication, differentiation, and expansion. Full-length cDNA encoding a Eucalyptus camaldulensis HD-Zip class II transcription factor (EcHB1) was over-expressed in vivo in the hybrid Eucalyptus GUT5 generated from Eucalyptus grandis and Eucalyptus urophylla. Overexpression of EcHB1 induced significant modification in the mesophyll anatomy of Eucalyptus with enhancements in the number of cells and chloroplasts on a leaf-area basis. The leaf-area-based photosynthesis of Eucalyptus was improved in the EcHB1-overexpression lines, which was due to both enhanced CO2 diffusion into chloroplasts and increased photosynthetic biochemical functions through increased number of chloroplasts per unit leaf area. Additionally, overexpression of EcHB1 suppressed defoliation and thus improved the growth of Eucalyptus trees under drought stress, which was a result of reduced water loss from trees due to the reduction in leaf area with no changes in stomatal morphology. These results gave us new insights into the role of the HD-Zip II gene.

Sign in / Sign up

Export Citation Format

Share Document