scholarly journals Fabrication and Mechanical Performance of Graphene Nanoplatelet/Glass Fiber Reinforced Polymer Hybrid Composites

2021 ◽  
Vol 8 ◽  
Author(s):  
Xudan Yao ◽  
Ian A. Kinloch ◽  
Mark A. Bissett
Keyword(s):  
Glass Fiber ◽  
Hybrid Composites ◽  
Fiber Reinforced Polymer ◽  
Fiber Reinforced ◽  
Gfrp Composites ◽  
Glass Fiber Reinforced Polymer ◽  
Graphene Nanoplatelet ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced ◽  
Out Of Plane

Glass fiber reinforced polymer (GFRP) composites are promising alternatives for the traditional carbon steel pipes used in the oil and gas industry due to their corrosion and chemical resistance. However, the out-of-plane mechanical properties of GFRPs still need further improvement to achieve this goal. Hence, in this work, two methods combining either vacuum mixing or spray coating with vacuum-assisted resin infusion were studied to fabricate graphene nanoplatelet (GNP)/GFRP hybrid composites. The former method resulted in a severe filtering effect, where the GNPs were not evenly distributed throughout the final composite, whereas the latter process resulted in a uniform GNP distribution on the glass fabrics. The addition of GNPs showed no modest contribution to the tensile performance of the GFRP composites due to the relatively high volume and in-plane alignment of the glass fibers. However, the GNPs did improve the flexural properties of GFRP with an optimal loading of 0.15 wt% GNPs, resulting in flexural strength and modulus increases of 6.8 and 1.6%, respectively. This work indicates how GNPs can be advantageous for out-of-plane mechanical reinforcement in fiber-reinforced composites.

scholarly journals Effect of Sea Water Environment Exposure on Glass Fiber Reinforced Polymer Composites

2019 ◽  
Vol 9 (1) ◽  
pp. 670-674
Keyword(s):  
Mechanical Properties ◽  
Glass Fiber ◽  
Mechanical Behaviour ◽  
Sea Water ◽  
Fiber Reinforced Polymer ◽  
Fiber Reinforced ◽  
Gfrp Composites ◽  
Glass Fiber Reinforced Polymer ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced

Glass fiber reinforced polymer(GFRP) composites are currently used in large numbers of diverse applications ranging from tip and engine strut fairings in aircrafts, building panels and dash boards in automotive vehicles, boat hulls in ocean vehicle structures, golf clubs and race helmets in sports equipment, etc. The service life of composite materials are influenced by the different adverse environment which leads to various failures like corrosion, fatigue, fracture, etc., results in loss of structural integrity due to environmental conditions. The investigations involved are to study the mechanical behaviour of these materials when subjected to various adverse conditions of the environment at different intervals of exposure due to change in moisture and temperature. Experiments were conducted on GFRP composites with and without exposing to different environment conditions of sea water. Tensile and flexural tests are conducted to predict the mechanical behaviour of both normal specimens and specimens exposed with sea water. Reduction in mechanical properties found due to maximum absorption of any liquid by the material. When temperature increases better in mechanical properties are noticed and at low temperature the composite behaves like a brittle.

scholarly journals Preparation and characterization of ramie-glass fiber reinforced polymer matrix hybrid composites

2012 ◽  
Vol 15 (3) ◽  
pp. 415-420 ◽  
Author(s):  
Daiane Romanzini ◽  
Heitor Luiz Ornaghi Junior ◽  
Sandro Campos Amico ◽  
Ademir José Zattera
Keyword(s):  
Glass Fiber ◽  
Polymer Matrix ◽  
Hybrid Composites ◽  
Fiber Reinforced Polymer ◽  
Fiber Reinforced ◽  
Glass Fiber Reinforced Polymer ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced

Preparation and Characterization of TiO2 Particulate Filled Polyester Based Glass Fiber Reinforced Polymer Composite

2014 ◽  
Vol 984-985 ◽  
pp. 360-366 ◽  
Author(s):  
S. Srinivasa Moorthy ◽  
K. Manonmani ◽  
M. Sankar Kumar
Keyword(s):  
Mechanical Properties ◽  
Glass Fiber ◽  
Chemical Resistance ◽  
Fiber Content ◽  
Fiber Reinforced Polymer ◽  
Fiber Reinforced ◽  
Gfrp Composites ◽  
Glass Fiber Reinforced Polymer ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced

Polyester based glass fiber reinforced polymer (GFRP) composites are widely used in marine and automotive industries because of its strength to weight ratio with lower price. In order to have the better properties of GFRP composites, the particulate filler material titanium oxide (TiO2) was added in unsaturated polyester resin with the fiber reinforcement by hand lay-up process. The fiber content was kept at 35 wt% constant with the fiber length of 5 cm. The particulate was varied with 2 wt. %, 4 wt. %, 6 wt. %, 8 wt. %, and 10 wt. %. Experiments were carried out to study the mechanical properties like tensile strength, impact strength, and Rockwell hardness. The chemical resistance analysis (CRA) was carried out by weight loss method. The mechanical properties of the hybrid reinforced composites were improved due to the fiber content with increased particulate content. The influence of the particulate content was more pronounced in the chemical resistance.

scholarly journals Application of the Combined ANN and GA for Multi-Response Optimization of Cutting Parameters for the Turning of Glass Fiber-Reinforced Polymer Composites

Mathematics ◽  
2020 ◽  
Vol 8 (6) ◽  
pp. 947
Author(s):  
Azhar Equbal ◽  
Mohammad Shamim ◽  
Irfan Anjum Badruddin ◽  
Md. Israr Equbal ◽  
Anoop Kumar Sood ◽  
...  
Keyword(s):  
Glass Fiber ◽  
Cutting Parameters ◽  
Fiber Reinforced Polymer ◽  
Fiber Reinforced ◽  
Gfrp Composites ◽  
Glass Fiber Reinforced Polymer ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced ◽  
Response Optimization ◽  
Optimization Of Cutting Parameters

Glass fiber-reinforced polymer (GFRP) composites find wide applications in automobile, aerospace, aircraft and marine industries due to their attractive properties such as lightness of weight, high strength-to-weight ratio, high stiffness, good dimensional stability and corrosion resistance. Although these materials are required in a wide range of applications, their non-homogeneous and anisotropic properties make their machining troublesome and consequently restrict their use. It is thus important to study not only the machinability of these materials but also to determine optimum cutting parameters to achieve optimum machining performance. The present work focuses on turning of the GFRP composites with an aim to determine the optimal cutting parameters that yield the optimum output responses. The effect of three cutting parameters, i.e., spindle rotational speed (N), feed rate (f) and depth of cut (d) in conjunction with their interactions on three output responses, viz., Material Removal Rate (MRR), Tool Wear Rate (TWR), and Surface roughness (Ra), is studied using full factorial design of experiments (FFDE). The statistical significance of the cutting parameters and their interactions is determined using analysis of variance (ANOVA). To relate the output response and cutting parameters, empirical models are also developed. Artificial Neural Network (ANN) combined with Genetic Algorithm (GA) is employed for multi-response optimization to simultaneously optimize the MRR, TWR and Ra.

scholarly journals Experimental Investigation on the Durability of Glass Fiber-Reinforced Polymer Composites Containing Nanocomposite

2013 ◽  
Vol 2013 ◽  
pp. 1-11 ◽  
Author(s):  
Weiwen Li ◽  
Chunyang Ji ◽  
Honggang Zhu ◽  
Feng Xing ◽  
Jiaxin Wu ◽  
...  
Keyword(s):  
Glass Fiber ◽  
Tensile Properties ◽  
Matrix Material ◽  
Fiber Reinforced Polymer ◽  
Clay Nanocomposites ◽  
Fiber Reinforced ◽  
Gfrp Composites ◽  
Glass Fiber Reinforced Polymer ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced

Nanoclay layers incorporated into polymer/clay nanocomposites can inhibit the harmful penetration of water and chemicals into the material, and thus the durability of glass fiber-reinforced polymer (GFRP) composites should be enhanced by using polymer/clay nanocomposite as the matrix material. In this study, 1.5 wt% vinyl ester (VE)/organoclay and 2 wt% epoxy (EP)/organoclay nanocomposites were prepared by an in situ polymerization method. The dispersion states of clay in the nanocomposites were studied by performing XRD analysis. GFRP composites were then fabricated with the prepared 1.5 wt% VE/clay and 2.0 wt% EP/clay nanocomposites to investigate the effects of a nanocomposite matrix on the durability of GFRP composites. The durability of the two kinds of GFRP composites was characterized by monitoring tensile properties following degradation of GFRP specimens aged in water and alkaline solution at 60°C, and SEM was employed to study fracture behaviors of aged GFRP composites under tension. The results show that tensile properties of the two types of GFRP composites with and without clay degrade significantly with aging time. However, the GFRP composites with nanoclay show a lower degradation rate compared with those without nanoclay, supporting the aforementioned hypothesis. And the modification of EP/GFRP enhanced the durability more effectively.

Sign in / Sign up

Export Citation Format

Share Document