scholarly journals Reconstruction of a Grinding Machine Intended for Thermo-Polymers, and Design of a Linux Based Iot Control System

2020 ◽  
Vol 13 (1) ◽  
pp. 45-49
Author(s):  
Attila Debreceni ◽  
Timotei István Erdei ◽  
Szabolcs Tóth ◽  
Géza Husi

AbstractWith the increasing use of 3D printing technology, a closely related problem is that of spreading. This problem is the presence of the polymer waste created by faulty prints, and support material used during printing. To create filament from this waste, it must first be chopped into fine pieces. In this project, an original polymer grinder was designed and built, adopting the innovations of Industry 4.0. Remote control and supervision were achieved using a Raspberry Pi I. type B and an Arduino Nano. The finished project can be seen in the faculty of engineering at the University of Debrecen.

2021 ◽  
Vol 2 (Mei) ◽  
pp. 15-25
Author(s):  
Resi Vega Dwi Setiabudi ◽  
Desyderius Minggu ◽  
Vincentius Arga Yoda Yoda

Pada era perkembangan teknologi di masa depan, teknologi sangat berkembang pesat khususnya pada bidang robotika dan persenjataan alutsista.  Robot mempunyai peran penting pada era masa kini karena sangat membantu segala aktivitas yang dilakukan oleh manusia. Umumnya robot bergerak dengan dikendalikan remote control yang jaraknya terjangkau, dan sekarang ini dengan adanya kendali menggunakan Internet of Things (IoT) robot dapat dikendalikan melalui jarak jauh asalkan terjangkau oleh jaringan internet pada daerah tersebut. Penelitian ini menggunakan metode mixing yang terdiri dari kualitatif dan kuantitatif. Pada penelitian ini, robot tempur CIA versi N2MR3 dibuat sedemikian rupa sehingga dapat bergerak ke segala arah. Robot tempur CIA versi N2MR3 dilengkapi dengan kamera sebagai mata pada robot tempur tersebut, serta dilengkapi dengan senjata yang dapat dikendalikan oleh operator untuk membantu tugas prajurit TNI dalam melaksanakan pengintaian maupun penyerangan. Robot tempur CIA versi N2MR3 dilengkapi juga dengan fungsi OMSP (Operasi Militer Selain Perang) yaitu penyemprot disinfektan dan mesin pemotong rumput dan pergerakan robot tempur dapat di monitor menggunakan GCS (Ground Control System) yang saling terkoneksi, kemudian data-data pengontrolan tersebut dikirimkan ke raspberry pi melalui komunikasi serial.


2021 ◽  
Vol 9 (4) ◽  
pp. 91-95
Author(s):  
Lyubov' Adamcevich ◽  
Il'nur Harisov

The development of science and technology in various areas of human life leads to the fact that an increasing number of routine operations are automated. The construction industry is no exception, which is actively developing today with the complex introduction of digital technologies. This approach is embedded in the Construction 4.0 concept, which is directly related to Industry 4.0. The article provides an overview of Industry 4.0 technologies related to the construction industry, because of which technologies that are promising for integration have been identified in order to increase the efficiency and safety of construction production through the development of a remote-control system for a construction site.


Author(s):  
Liu Shi-nian ◽  
Hu Shan ◽  
Ma Cun-ren ◽  
Xu He-zhang ◽  
Su Wei ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document