scholarly journals Measurement of Water Mole Fraction from Acoustically Levitated Pure Water and Protein Water Solution Droplets via Tunable Diode Laser Absorption Spectroscopy (TDLAS) at 1.37 µm

2021 ◽  
Vol 11 (11) ◽  
pp. 5036
Author(s):  
Julian F. A. Perlitz ◽  
Heiko Broß ◽  
Stefan Will

In order to understand the evaporation and particle formation processes of sprays in technical applications such as fuel injectors or drying processes in the food and pharmaceutical industries in detail, single droplet drying experiments, for example, acoustic levitation, are widely used as model experiments. We combined acoustic levitation and tunable diode laser absorption spectroscopy (TDLAS) to measure the absolute H2O concentration in the exhaust gas of a levitation chamber to investigate drying and particle formation processes from single droplets of pure water and protein–water solutions. To that end, we designed and developed a non-invasive, calibration-free TDLAS-based hygrometer to analyze the 1.4 µm overtone band. To increase the detection range of the developed hygrometer and to track the complete drying process of protein solution droplets even after the critical point of drying, the absorption length was extended to a path length of 18 m using an astigmatic multipass cell of the Herriott type. The setup was validated by drying pure water droplets, resulting in a determination of the water mole fraction in a range from 73 ppm to 1314 ppm, with a single scan resolution of 1.7 ppm. For protein solution droplets, the entire drying process, even beyond the critical point of drying, can be tracked and the different phases of the drying process can be characterized at different drying temperatures.

2021 ◽  
Vol 16 (2) ◽  
pp. 222-229
Author(s):  
Lin Feng ◽  
Jian Wang ◽  
Chao Ding

Tunable diode laser absorption spectroscopy (TDLAS) technology is adopted herein to detect fire gas produced in the early stage of the fire. Based on this technology, a fire warning detection system with multiple lasers and detectors is proposed. Multiple drivers input laser’s temperature and injected current data, making its output wavelength consistent with the measured gas’ absorption peak wavelengths in absorption spectroscopy. Multiple light beams are coupled to the same optical fiber. After the light beams pass through the long optical path absorption cell filled with fire gas, the beams are separated by a converter. The signals are demodulated by different detectors and further analyzed for fire warnings. After the fire warning system’s design, the system’s various hardware modules are designed, including the light source module, TDLAS controller, gas chamber module, photoelectric detector, and data collection. When the temperature remains unchanged, the output wavelength is linearly related to the injected current. When the injected current remains unchanged, the output wavelength is linearly related to the operating temperature. With a semiconductor laser’s injected current of 40 mA, the initial temperature of 38.6 °C, and the output wavelength of 1578.16 nm, the output wavelength increases continuously as the temperature increases. The harmonic signal amplitude after gas absorption is positively correlated with the measured gas concentration, indicating that the second harmonic signals can estimate the fire gas concentration.


2013 ◽  
Vol 38 (14) ◽  
pp. 2428 ◽  
Author(s):  
P. Adámek ◽  
J. Olejníček ◽  
M. Čada ◽  
Š. Kment ◽  
Z. Hubička

Chemosphere ◽  
1993 ◽  
Vol 26 (1-4) ◽  
pp. 13-22 ◽  
Author(s):  
M. Schupp ◽  
P. Bergamaschi ◽  
G.W. Harris ◽  
P.J. Crutzen

2021 ◽  
Vol 11 (22) ◽  
pp. 10936
Author(s):  
Renjie Li ◽  
Fei Li ◽  
Xin Lin ◽  
Xilong Yu

As an effective optical diagnosis method, tunable diode-laser absorption spectroscopy (TDLAS) has increasingly moved to examine nonuniform flows, such as two-dimensional combustion diagnosis. To investigate the effect of nonuniformity along the line of sight in a measurement using TDLAS, the integrated absorbance (IA, the key intermediate quantity in TDLAS) error was quantified. The error distribution is obtained from the line-shape parameters through the comprehensive analysis of the line-shape function and the fitting method. The effects of the fitting function and the absorption line overlap are also considered. A general method for estimating the error is given. The work illustrates the applicability of TDLAS technology in nonuniform flow fields and provides input parameters for the evaluation of tunable diode laser absorption tomography error.


Sign in / Sign up

Export Citation Format

Share Document