scholarly journals Modeling Hot Deformation of 5005 Aluminum Alloy through Locally Constrained Regression Models with Logarithmic Transformations

2021 ◽  
Vol 12 (1) ◽  
pp. 152
Author(s):  
Jeongho Cho ◽  
Shin-Hyung Song

This study presents the adoption of locally constrained regression models (LCRMs) with logarithmic transformations in order to model the flow stress behavior of the high-temperature deformation of 5005 aluminum alloy. Hot tensile tests for 5005 aluminum alloy were conducted under the temperatures of 290 °C, 360 °C, 430 °C, and 500 °C, and the strain rates of 0.0003/s, 0.003/s, and 0.03/s. The flow stress behavior was analyzed based on variations in temperature and strain rate. The flow stress during the hot deformation was modeled using the traditional Arrhenius type constitutive equation and the neural network approach. Then, for improved prediction accuracy, the flow stress was modeled using LCRMs. The prediction accuracies of the models were compared by calculating the MAE (Maximum Absolute Error) and RMSE (Root-Mean-Squared Errors) values. The MAE and RMSE of the LCRMs were lower than the errors of the Arrhenius equation and the neural network model. The results show that LCRMs can be useful in modeling the flow stress of 5005 aluminum alloy, and that the developed model can accurately predict the flow stress.

2012 ◽  
Vol 510 ◽  
pp. 723-728 ◽  
Author(s):  
Liang Cheng ◽  
Hui Chang ◽  
Bin Tang ◽  
Hong Chao Kou ◽  
Jin Shan Li

In this work, a back propagation artificial neural network (BP-ANN) model is conducted to predict the flow behaviors of high-Nb TiAl (TNB) alloys during high temperature deformation. The inputs of the neural network are deformation temperature, log strain rate and strain whereas flow stress is the output. There is a single hidden layer with 7 neutrons in the network, and the weights and bias of the network were optimized by Genetic Algorithm (GA). The comparison result suggests a very good correlation between experimental and predicted data. Besides, the non-experimental flow stress predicted by the network is shown to be in good agreement with the results calculated by three dimensional interpolation, which confirmed a good generalization capability of the proposed network.


2006 ◽  
Vol 33 (4) ◽  
pp. 508-514 ◽  
Author(s):  
Mei yan Zhan ◽  
Zhenhua Chen ◽  
Hui Zhang ◽  
Weijun Xia

2020 ◽  
Vol 7 ◽  
Author(s):  
Dongxin Niu ◽  
Chao Zhao ◽  
Daoxi Li ◽  
Zhi Wang ◽  
Zongqiang Luo ◽  
...  

Three constitutive models, strain-compensated Arrhenius model, modified Johnson–Cook (JC) model, and modified Zerilli–Armstrong (ZA) model, were established for the hot-deformed Cu-15Ni-8Sn alloy based on hot compression tests. By introducing average absolute relative error (AARE), correlation coefficient (R), and relative error, the prediction accuracy of these three models was assessed. The results indicate that strain-compensated Arrhenius model has the highest accuracy at describing the flow stress behavior of the studied alloy, followed by modified JC model and modified ZA model. Moreover, the strain-compensated Arrhenius model established in this work has a great practicability in the hot-extrusion simulation of Cu-15Ni-8Sn alloys. This article provides a theoretical basis for optimizing hot deformation parameters in industrial production of the Cu-15Ni-8Sn alloys.


Sign in / Sign up

Export Citation Format

Share Document