scholarly journals Implementation of an Autonomous Overtaking System Based on Time to Lane Crossing Estimation and Model Predictive Control

Electronics ◽  
2021 ◽  
Vol 10 (18) ◽  
pp. 2293
Author(s):  
Yu-Chen Lin ◽  
Chun-Liang Lin ◽  
Shih-Ting Huang ◽  
Cheng-Hsuan Kuo

According to statistics, the majority of accidents are attributed to driver negligence, especially when a driver intends to lane change or to overtake another vehicle, which is most likely to cause accidents. In addition, overtaking is one of the most difficult and complex functions for the development of autonomous driving technologies because of the dynamic and complicated task involved in the control strategy and electronic control systems, such as steering, throttle, and brake control. This paper proposes a safe overtaking maneuver procedure for an autonomous vehicle based on time to lane crossing (TLC) estimation and the model predictive control scheme. As overtaking is one of the most complex maneuvers that require both lane keeping and lane changing, a vision-based lane-detection system is used to estimate TLC to make a timely and accurate decision about whether to overtake or remain within the lane. Next, to maintain the minimal safe distance and to choose the best timing to overtake, the successive linearization-based model predictive control is employed to derive an optimal vehicle controller, such as throttle, brake, and steering angle control. Simultaneously, it can make certain that the longitudinal acceleration and steering velocity are maintained under constraints to maintain driving safety. Finally, the proposed system is validated by real-world experiments performed on a prototype electric golf cart and executed in real-time on the automotive embedded hardware with limited computational power. In addition, communication between the sensors and actuators as well as the vehicle control unit (VCU) are based on the controller area network (CAN) bus to realize vehicle control and data collection. The experiments demonstrate the ability of the proposed overtaking decision and control strategy to handle a variety of driving scenarios, including a lane-following function when a relative yaw angle exists and an overtaking function when the approaching vehicle has a different lateral velocity.

Mathematics ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 760
Author(s):  
Fang Liu ◽  
Haotian Li ◽  
Ling Liu ◽  
Runmin Zou ◽  
Kangzhi Liu

In this paper, the speed tracking problem of the interior permanent magnet synchronous motor (IPMSM) of an electric vehicle is studied. A cascade speed control strategy based on active disturbance rejection control (ADRC) and a current control strategy based on improved duty cycle finite control set model predictive control (FCSMPC) are proposed, both of which can reduce torque ripple and current ripple as well as the computational burden. First of all, in the linearization process, some nonlinear terms are added into the control signal for voltage compensation, which can reduce the order of the prediction model. Then, the dq-axis currents are selected by maximum torque per ampere (MTPA). Six virtual vectors are employed to FCSMPC, and a novel way to calculate the duty cycle is adopted. Finally, the simulation results show the validity and superiority of the proposed method.


Sign in / Sign up

Export Citation Format

Share Document