scholarly journals A Power Loss Decrease Method Based on Finite Set Model Predictive Control for a Motor Emulator with Reduced Switch Count

Energies ◽  
2019 ◽  
Vol 12 (24) ◽  
pp. 4647
Author(s):  
Rui Qin ◽  
Chunhua Yang ◽  
Hongwei Tao ◽  
Tao Peng ◽  
Chao Yang ◽  
...  

This paper presents a power loss decrease method based on finite set model predictive control (FSMPC) with delay compensation for a motor emulator with reduced switch count. Specifically, the topology and mathematical model of the proposed motor emulator with reduced switch count are firstly built. Secondly, in light of given instructions, the normal or fault reference current of the motor emulator is set by a reference current setter. Then delay compensation is applied for the predictive current model to calculate the current residual generated by each switch control signal, and the current tracking performance under actions of two adjacent switch control signals is evaluated for each sector. Finally, a switch power loss objective function is defined, then the two adjacent switch control signals that generate the lowest switch power loss are selected for the next second instant, which minimizes the power loss of the motor emulator with ensuring satisfied current tracking performance. Simulation and experimental results show the feasibility and effectiveness of the proposed method.

Author(s):  
Mai Van Chung ◽  
Do Tuan Anh ◽  
Phuong Vu

Model predictive control has been considered as a powerful alternative control method in power converters and electrical drives recently. This paper proposes a novel method for finite control set predictive control algorithm foran induction motor fed by 11-level cascaded H-Bridge converter. To deal with the high computation volume of MPC algorithm applied for CHBconverter, 7-adjacent vectors method is applied for calculating the desired voltage vector which minimizes the cost function. Moreover, by utilizingfield programmable gate array (FPGA) platform with its flexible structure,the total execution time reduces considerably so that the selected voltage vector can be applied immediately without delay compensation. This method improves the dynamic responses and steady-state performance of the system. Finally, experimental results verify the effectiveness of control design


IEEE Access ◽  
2021 ◽  
pp. 1-1
Author(s):  
Jose J. Silva ◽  
Jose R. Espinoza ◽  
Jaime A. Rohten ◽  
Esteban S. Pulido ◽  
Felipe A. Villarroel ◽  
...  

2018 ◽  
Vol 65 (5) ◽  
pp. 3954-3965 ◽  
Author(s):  
Felipe Donoso ◽  
Andres Mora ◽  
Roberto Cardenas ◽  
Alejandro Angulo ◽  
Doris Saez ◽  
...  

2018 ◽  
Vol 11 (15) ◽  
pp. 2450-2460 ◽  
Author(s):  
Xiao Zhang ◽  
Li Tan ◽  
Jiaheng Xian ◽  
Hui Zhang ◽  
Zhixun Ma ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document