scholarly journals FPAES: A Hybrid Approach for the Optimal Placement and Sizing of Reactive Compensation in Distribution Grids

Energies ◽  
2020 ◽  
Vol 13 (23) ◽  
pp. 6409
Author(s):  
Diego José da Silva ◽  
Edmarcio Antonio Belati ◽  
Eduardo Werley Silva dos Angelos
Keyword(s):  
Distribution Systems ◽  
Reactive Power ◽  
Hybrid Approach ◽  
Computational Effort ◽  
Optimal Placement ◽  
Flower Pollination Algorithm ◽  
Voltage Profile ◽  
Capacitor Banks ◽  
Reactive Compensation ◽  
Computational Performance

Reactive power compensation with Capacitor Banks (CBs) is one of the most successful approaches used in distribution systems, mainly due to their versatility, long-term acceptance in the power industry, and reduced costs. Most allocation methods, however, lack specific strategies to handle the limited discrete nature of CBs sizes seeking to improve the overall optimization and computational performance. We present an algorithm for the Optimal Placement of Capacitor Banks (OPCB) in distribution systems by means of a hybrid Flower Pollination Algorithm (FPA)–Exhaustive Search (ES) approach. The pollination process itself determines the sets of buses for placement, while CBs sizes and the final fitness values of each pollen are selected after a full-search is conducted in the sizing space. As the sizing phase works on the limited search space of predetermined discrete bank values, the computational effort to find the optimum CB capacity is greatly reduced. Tests were performed on distribution systems of 10, 34, and 85 buses with respect to the objective function, final losses, and voltage profile. The algorithm offers an excellent compromise between solution quality and computational effort, when compared to similar approaches.

scholarly journals Allocation of distributed generation and capacitor banks in distribution system

2019 ◽  
Vol 13 (2) ◽  
pp. 437 ◽  
Author(s):  
Olatunde Oladepo ◽  
Hasimah Abdul Rahman
Keyword(s):  
Distribution System ◽  
Power Flow ◽  
Distribution Systems ◽  
Reactive Power ◽  
Optimal Placement ◽  
Voltage Profile ◽  
Power Losses ◽  
Capacitor Banks ◽  
Reactive Power Flow ◽  
Imaginary Power

<p>Voltage profile and power losses on the distribution system is a function of real and imaginary power loading condition. This can be effectively managed through the controlled real and reactive power flow by optimal placement of capacitor banks (CB) and distributed generators (DG). This paper presents adaptive Particle Swarm Optimization (MPSO) to efficiently tackle the problem of simultaneous allocation of DG and CB in radial distribution system to revamp voltage magnitude and reduce power losses. The modification to the conventional PSO was achieved by replacing the inertial weight equation (W) in the velocity update equation base on the particle best experience in the previous iteration. The inertial weight equation is designed to vary with respect to the iteration value in the algorithm. The proposed method was investigated on IEEE 30-bus, 33-bus and 69-bus test distribution systems. The results shows a significant improvement in the rate of convergence of APSO, improved voltage profile and loss reduction.</p>

scholarly journals Optimal Sizing and Placement of Capacitor Banks in Distribution Networks Using a Genetic Algorithm

Electricity ◽  
2021 ◽  
Vol 2 (2) ◽  
pp. 187-204
Author(s):  
Gian Giuseppe Soma
Keyword(s):  
Genetic Algorithm ◽  
Electricity Market ◽  
Distribution Systems ◽  
Reactive Power ◽  
Electricity Consumption ◽  
Distribution Networks ◽  
Optimal Placement ◽  
Capacitor Banks ◽  
Control Pattern ◽  
Definition Of

Nowadays, response to electricity consumption growth is mainly supported by efficiency; therefore, this is the new main goal in the development of electric distribution networks, which must fully comply with the system’s constraints. In recent decades, the issue of independent reactive power services, including the optimal placement of capacitors in the grid due to the restructuring of the electricity industry and the creation of a competitive electricity market, has received attention from related companies. In this context, a genetic algorithm is proposed for optimal planning of capacitor banks. A case study derived from a real network, considering the application of suitable daily profiles for loads and generators, to obtain a better representation of the electrical conditions, is discussed in the present paper. The results confirmed that some placement solutions can be obtained with a good compromise between costs and benefits; the adopted benefits are energy losses and power factor infringements, taking into account the network technical limits. The feasibility and effectiveness of the proposed algorithm for optimal placement and sizing of capacitor banks in distribution systems, with the definition of a suitable control pattern, have been proved.

scholarly journals Combination of Optimal Conductor Selection and Capacitor Placement in Radial Distribution Systems Using PSO Method

2014 ◽  
Vol 10 (1) ◽  
pp. 33-41
Author(s):  
Mahdi Legha ◽  
Farzaneh Ostovar ◽  
Mohammad Legha
Keyword(s):  
Radial Distribution ◽  
Distribution Systems ◽  
Distribution Networks ◽  
Optimal Placement ◽  
Voltage Profile ◽  
Capacitor Banks ◽  
Capacitor Placement ◽  
Kerman City ◽  
Voltage Limit ◽  
The Cost

In This paper presents an approach for optimal placement and sizing of fixed capacitor banks and also optimal conductor selection in radial distribution networks for the purpose of economic minimization of loss and enhancement of voltage. The objective function includes the cost of power losses, voltage profile, fixed capacitor banks and also type of conductor selection. Constraints include voltage limit, maximum permissible carrying current of conductors, size of available capacitors and type of conductors. The optimization problem is solved by the Imperialism Competitive algorithm method and the size and site capacitor banks and type of conductors is determined. To demonstrate the validity of the proposed algorithm, computer simulations are carried out on actual power network of Kerman city, Iran and the simulation results are presented and discussed.

scholarly journals TECHNO-ECONOMIC ASSESMENT FOR DISTRIBUTED GENERATION PLACEMENT IN DISTRIBUTION SYSTEM

KURVATEK ◽  
2019 ◽  
Vol 4 (1) ◽  
pp. 1-6
Author(s):  
Sugiarto Kadiman
Keyword(s):  
Distributed Generation ◽  
Power Loss ◽  
Distribution Systems ◽  
Reactive Power ◽  
Test System ◽  
Optimal Placement ◽  
Loss Reduction ◽  
Voltage Profile ◽  
Power Loss Reduction ◽  
Reduction Index

This paper presents a proposed function which is known as techno-economic model for optimal placement of distributed generation (DG) resources in distribution systems in order to minimize the power losses and improve voltage profile. Combined sensitivity factors (CSF), such real power loss reduction index, reactive power loss reduction index, voltage profile improvement index, and life cycle cost, and particle swarm optimization (PSO) are applied to the proposed technique to obtain the best compromise between these costs. Simulation results on IEEE 14-bus test system are presented to demonstrate the usefulness of the proposed procedure.

Optimization of Real Power Loss and Voltage Stability Index for Distribution Systems with Distributed Generation

2017 ◽  
Vol 33 ◽  
pp. 100-114 ◽  
Author(s):  
Mostafa Elshahed ◽  
Mahmoud Dawod ◽  
Zeinab H. Osman
Keyword(s):  
Genetic Algorithm ◽  
Distributed Generation ◽  
Distribution Systems ◽  
Voltage Stability ◽  
Reactive Power ◽  
Optimization Problems ◽  
Stability Index ◽  
Mixed Integer ◽  
Voltage Profile ◽  
Voltage Stability Index

Integrating Distributed Generation (DG) units into distribution systems can have an impact on the voltage profile, power flow, power losses, and voltage stability. In this paper, a new methodology for DG location and sizing are developed to minimize system losses and maximize voltage stability index (VSI). A proper allocation of DG has to be determined using the fuzzy ranking method to verify best compromised solutions and achieve maximum benefits. Synchronous machines are utilized and its power factor is optimally determined via genetic optimization to inject reactive power to decrease system losses and improve voltage profile and VSI. The Augmented Lagrangian Genetic Algorithm with nonlinear mixed-integer variables and Non-dominated Sorting Genetic Algorithm have been implemented to solve both single/multi-objective function optimization problems. For proposed methodology effectiveness verification, it is tested on 33-bus and 69-bus radial distribution systems then compared with previous works.

Reactive Power Compensation of Oilfield Distribution Systems Based on Tabu Search Algorithm

2013 ◽  
Vol 397-400 ◽  
pp. 1113-1116
Author(s):  
Xiao Meng Wu ◽  
Wang Hao Fei ◽  
Xiao Mei Xiang ◽  
Wen Juan Wang
Keyword(s):  
Power Loss ◽  
Distribution Systems ◽  
Reactive Power ◽  
Search Algorithm ◽  
Global Optimum ◽  
Reactive Power Compensation ◽  
Active Power ◽  
Voltage Profile ◽  
Voltage Range ◽  
Shunt Capacitors

In order to solve the problem in reactive power compensation of oilfield distribution systems at present, a Taboo search algorithm is proposed in this paper, by which the optimal location and size of shunt capacitors on distribution systems are determined. Then the voltage profile is improved and the active power loss is reduced. In this paper, Voltage qualified is used as objective function to search an initial solution that meets the voltage constraints so that it is feasible in practicable voltage range; then the global optimum solution can be got when taking the reduced maximum of active power loss as objective unction. The examples show that the improved algorithm is feasible and effective.

scholarly journals Simultaneous Placement and Sizing of Distributed Generation Units and Shunt Capacitors on Radial Distribution Systems Using Cuckoo Search Algorithm

2021 ◽  
pp. 43-58
Author(s):  
Sunday Adeleke Salimon ◽  
Gafari Abiola Adepoju ◽  
Isaiah Gbadegesin Adebayo ◽  
Oluwadamilare Bode Adewuyi ◽  
Saheed Oluwasina Amuda
Keyword(s):  
Radial Distribution ◽  
Distribution Systems ◽  
Reactive Power ◽  
Search Algorithm ◽  
Stability Index ◽  
Cuckoo Search ◽  
Optimal Placement ◽  
Power Loss Reduction ◽  
Operational Test ◽  
Shunt Capacitors

This paper presents a Cuckoo Search (CS) algorithm-based methodology for simultaneous optimal placement and sizing of Shunt Capacitors (SCs) and Distributed Generations (DGs) together in radial distribution systems. The objectives of the work are to minimize the real power and reactive power losses while maximizing the voltage stability index of the distribution network subjected to equality and inequality constraints. Different operational test cases are considered namely installation of SCs only, DGs only, SCs before DGs, DGs before SCs, and SCs and DGs at one time. The proposed method has been demonstrated on standard IEEE 33-bus and a practical Ayepe 34-bus radial distribution test systems. The highest percentage power loss reduction of 94.4% and other substantial benefits are obtained when SCs and DGs are optimally installed simultaneously. Simulated results obtained from the proposed technique are compared with other well-known optimization algorithms and found to be more effective.

scholarly journals Optimal Allocation of Capacitor Bank for Loss Minimization and Voltage Improvement Using Analytical Method

SCITECH Nepal ◽  
2019 ◽  
Vol 14 (1) ◽  
pp. 1-7
Author(s):  
Avinash Khatri KC ◽  
Tika Ram Regmi
Keyword(s):  
Distribution System ◽  
Distribution Systems ◽  
Optimal Allocation ◽  
Reactive Power ◽  
Capacitor Bank ◽  
Minimum Cost ◽  
Distribution Networks ◽  
Standard Test ◽  
Load Flow ◽  
Voltage Profile

An electric distribution system plays an important role in achieving satisfactory power supply. The quality of power is measured by voltage stability and profile of voltage. The voltage profile is affected by the losses in distribution system. As the load is mostly inductive on the distribution system and requires large reactive power, most of the power quality problems can be resolved with requisite control of reactive power. Capacitors are often installed in distribution system for reactive power compensation. This paper presents two stage procedures to identify the location and size of capacitor bank. In the first stage, the load flow is carried out to find the losses of the system using sweep algorithm. In the next stage, different size of capacitors are initialized and placed in each possible candidate bus and again load flow for the system is carried out. The objective function of the cost incorporating capacitor cost and loss cost is formulated constrained with voltage limits. The capacitor with the minimum cost is selected as the optimized solution. The proposed procedure is applied to different standard test systems as 12-bus radial distribution systems. In addition, the proposed procedure is applied on a real distribution system, a section of Sallaghari Feeder of Thimi substation. The voltage drops and power loss before and after installing the capacitor were compared for the system under test in this work. The result showed better voltage profiles and power losses of the distribution system can be improved by using the proposed method and it can be a benefit to the distribution networks.

scholarly journals Secondary Voltage Control Application in a Smart Grid with 100% Renewables

Inventions ◽  
2020 ◽  
Vol 5 (3) ◽  
pp. 37 ◽  
Author(s):  
Omar H. Abdalla ◽  
Hady H. Fayek ◽  
A. M. Abdel Ghany
Keyword(s):  
Optimal Power Flow ◽  
Reactive Power ◽  
Short Circuit ◽  
Voltage Control ◽  
Operating Conditions ◽  
Optimal Placement ◽  
Total Power ◽  
Voltage Profile ◽  
Power Losses ◽  
Secondary Voltage

This paper presents secondary voltage control by extracting reactive power from renewable power technologies to control load buses voltage in a power system at different operating conditions. The study is performed on a 100% renewable 14-bus system. Active and reactive powers controls are considered based on grid codes of countries with high penetration levels of renewable energy technologies. A pilot bus is selected in order to implement the secondary voltage control. The selection is based on short-circuit calculation and sensitivity analysis. An optimal Proportional Integral Derivative (PID) voltage controller is designed using genetic algorithm. A comparison between system with and without secondary voltage control is presented in terms of voltage profile and total power losses. The optimal voltage magnitudes at busbars are calculated to achieve minimum power losses using optimal power flow. The optimal placement of Phasor Measurement Units (PMUs) is performed in order to measure the voltage magnitude of buses with minimum cost. Optimization and simulation processes are performed using DIgSILENT and MATLAB software applications.

Sign in / Sign up

Export Citation Format

Share Document