Optimization of Design Variables of a Phase Change Material Storage Tank and Comparison of a 2D Implicit vs. 2D Explicit Model

In this study, a thermal energy storage tank filled with commercial phase change material flat slabs is investigated. The tank provides heat at around 15 °C to the evaporator of a seasonal thermal energy storage system developed under the EU-funded project SWS-Heating. A 2D numerical model of the phase changed material storage tank based on the finite control volume approach was developed and validated with experimental data. Based on the validated model, an optimization was performed to identify the number, type and configuration of slabs. The final goal of the phase change material tank model is to be implemented into the whole generic heating system model. A trade-off between results’ accuracy and computational time of the phase change material model is needed. Therefore, a comparison between a 2D implicit and 2D explicit scheme of the model was performed. The results showed that using an explicit scheme instead of an implicit scheme with a reasonable number of nodes (15 to 25) in the heat transfer fluid direction allowed a considerable decrease in the computational time (7 times for the best case) with only a slight reduction in the accuracy in terms on mean average percentage error (0.44%).