scholarly journals Use of Isomerization and Hydroisomerization Reactions to Improve the Cold Flow Properties of Vegetable Oil Based Biodiesel

Energies ◽  
2013 ◽  
Vol 6 (2) ◽  
pp. 619-633 ◽  
Author(s):  
Stephen Reaume ◽  
Naoko Ellis
Energy ◽  
2014 ◽  
Vol 65 ◽  
pp. 109-115 ◽  
Author(s):  
Marta Serrano ◽  
Rubén Oliveros ◽  
Marcos Sánchez ◽  
Andrea Moraschini ◽  
Mercedes Martínez ◽  
...  

Energies ◽  
2020 ◽  
Vol 13 (7) ◽  
pp. 1542 ◽  
Author(s):  
Laura Aguado-Deblas ◽  
Jesús Hidalgo-Carrillo ◽  
Felipa M. Bautista ◽  
Diego Luna ◽  
Carlos Luna ◽  
...  

The aim of this work is to analyze the effect of using diethyl ether (DEE) as an oxygenated additive of straight vegetable oils (SVOs) in triple blends with fossil diesel, to be used in current compression ignition (C.I.) engines, in order to implement the current process of replacing fossil fuels with others of a renewable nature. The use of DEE is considered taking into account the favorable properties for blending with SVO and fossil diesel, such as its very low kinematic viscosity, high oxygen content, low autoignition temperature, broad flammability limits (it works as a cold start aid for engines), and very low values of cloud and pour point. Therefore, DEE can be used as a solvent of vegetable oils to reduce the viscosity of the blends and to improve cold flow properties. Besides, DEE is considered renewable, since it can be easily obtained from bioethanol, which is produced from biomass through a dehydration process. The vegetable oils evaluated in the mixtures with DEE were castor oil, which is inedible, and sunflower oil, used as a standard reference for waste cooking oil. In order to meet European petrodiesel standard EN 590, a study of the more relevant rheological properties of biofuels obtained from the DEE/vegetable oil double blends has been performed. The incorporation of fossil diesel to these double blends gives rise to diesel/DEE/vegetable oil triple blends, which exhibited suitable rheological properties to be able to operate in conventional diesel engines. These blends have been tested in a conventional diesel engine, operating as an electricity generator. The efficiency, consumption and smoke emissions in the engine have been measured. The results reveal that a substitution of fossil diesel up to 40% by volume can be achieved, independently of the SVO employed. Moreover, a significant reduction in the emission levels of pollutants and better cold flow properties has been also obtained with all blends tested.


2021 ◽  
Vol 98 (2) ◽  
pp. 163-172
Author(s):  
Baoting Su ◽  
Lulu Wang ◽  
Yuan Xue ◽  
Jincan Yan ◽  
Zhenbiao Dong ◽  
...  

2010 ◽  
Vol 101 (19) ◽  
pp. 7375-7381 ◽  
Author(s):  
Ángel Pérez ◽  
Abraham Casas ◽  
Carmen María Fernández ◽  
María Jesús Ramos ◽  
Lourdes Rodríguez

2021 ◽  
Vol 903 ◽  
pp. 75-80
Author(s):  
Valdis Kampars ◽  
Anastasija Naumova

The blends of varying proportions of biodiesel (FAME) containing formate esters of glycerol and 93.0 wt.% fatty acid methyl esters, obtained in an interesterification reaction with methyl formate without further purification, and winter diesel fuel, were prepared, analyzed and compared with winter diesel fuel. The obtained results showed that blends comprising up to 20 vol.% of FAME fulfill the requirements of the standard LVS EN 590 concerning such characteristics as cold flow properties, viscosity, density, and carbon residue. The increase of FAME content worsens the cold flow properties; however, the mixed fuel with 20 vol.% or lower FAME content, according to the cloud point and cold filter plugging point values, remains in the same severe climate "Class 0" group as winter fuel. The carbon residue of mixed fuels raises with increasing FAME content, but stay low and do not exceed the limits of standard for mixtures with FAME percentage up to 20 vol.%. The comparison of mixed fuels containing 20 vol.% of FAME and the same amount of neat biodiesel (99.6 wt.% of fatty acid methyl esters) shows that the difference is negligible. The obtained results have indicated a good potential of FAME obtained in the interesterification reaction with methyl formate without further purification as a diesel fuel additive for up to 20 vol.%.


Fuel ◽  
2022 ◽  
Vol 315 ◽  
pp. 123112
Author(s):  
Yuan Xue ◽  
Taishun Yang ◽  
Hualin Lin ◽  
Shiyou Zheng ◽  
Sheng Han

Sign in / Sign up

Export Citation Format

Share Document