scholarly journals Exploring the Influence of Industrial and Climatic Variables on Communities of Benthic Macroinvertebrates Collected in Streams and Lakes in Canada’s Oil Sands Region

Environments ◽  
2021 ◽  
Vol 8 (11) ◽  
pp. 123
Author(s):  
Tim J. Arciszewski

Identifying and tracking the influence of industrial activities on streams and lakes is a priority for monitoring in Canada’s oil sands region (OSR). While differences in indicators are often found in waterbodies adjacent to mining facilities, the confounding influence of natural exposures to bitumen and other stressors can affect the identification of industrial effects. However, recent work suggests metrics of industrial activity at individual facilities, including production and fuel consumption, may be used in site-specific analyses to identify influence of the industry as a whole as well as individual operations. This study further examined the potential relationships between industrial and climatic variables on benthic communities from 13 streams and 4 lakes using publicly available data from the minable region and the Elastic Net (EN) variable selection technique. From the full set of possible industrial and climate variables, the EN commonly identified the negative influence of plant and fuel use of petroleum coke at the Suncor Basemine on benthic communities in streams and lakes. The fuel/plant use of petroleum coke at Suncor likely reflects the emission and regional deposition of delayed coke fly ash. Among the other industrial variables, crude bitumen production at Syncrude Mildred Lake and other facilities, steam injection rates, and petroleum coke stockpiling were also selected for some benthic invertebrate indices at some sites. Land disturbance metrics were also occasionally selected, but the analyses largely support the predominant influence of industrial facilities via (inferred) atmospheric pathways. While climate variables were also commonly selected by EN and follow-up work is needed, this study suggests that integrating industrial performance data into analyses of biota using a site-specific approach may have broad applicability in environmental monitoring in the OSR. More specifically, the approach used here may both resolve the long-standing challenge of natural confounding influences on monitoring the status of streams in the OSR and track the influence of industrial activities in biota below critical effect sizes.

2015 ◽  
Vol 49 (20) ◽  
pp. 12062-12070 ◽  
Author(s):  
Josué J. Jautzy ◽  
Jason M. E. Ahad ◽  
Charles Gobeil ◽  
Anna Smirnoff ◽  
Benjamin D. Barst ◽  
...  

SPE Journal ◽  
2012 ◽  
Vol 17 (03) ◽  
pp. 680-686 ◽  
Author(s):  
Dharmeshkumar R. Gotawala ◽  
Ian D. Gates

Summary Full steam conformance along the well pair of the steam-assisted gravity-drainage (SAGD) oil-sands-recovery process is essential for high thermal efficiency. Conformance can be improved by controlling injection and production strategies to ensure that steam is delivered to target regions in the reservoir. Smart wells use interval-control valves (ICVs) that, conceptually, can be dynamically controlled to yield uniform steam injectivity along the well pair. Dynamic control algorithms, such as proportional-integral-derivative (PID) control and their associated controller parameters, have not yet been developed for the SAGD processes that use ICVs. One control strategy would be to control the interwell subcool temperature difference—that is, the difference between the steam-injection temperature and the produced-fluids temperature. If this temperature difference is small, then the liquid pool above the production well is small and there is a likelihood of live steam production from the chamber. On the other hand, if the difference is large, the pool may rise above the injection well and gravity drainage is hindered because the chamber is largely filled with liquid. Here, the focus is on developing a simple, approximate theory for the behavior of the liquid pool at the base of the steam chamber to determine the ranges of values of control parameters to achieve a targeted interwell subcool temperature difference.


2011 ◽  
Vol 409 (23) ◽  
pp. 5119-5125 ◽  
Author(s):  
Mohamed Gamal El-Din ◽  
Hongjing Fu ◽  
Nan Wang ◽  
Pamela Chelme-Ayala ◽  
Leonidas Pérez-Estrada ◽  
...  

2010 ◽  
Author(s):  
Weiqiang Li ◽  
Daulat D. Mamora

Abstract Steam Assisted Gravity Drainage (SAGD) is one successful thermal recovery technique applied in the Athabasca oil sands in Canada to produce the very viscous bitumen. Water for SAGD is limited in supply and expensive to treat and to generate steam. Consequently, we conducted a study into injecting high-temperature solvent instead of steam to recover Athabasca oil. In this study, hexane (C6) coinjection at condensing condition is simulated using CMG STARS to analyze the drainage mechanism inside the vapor-solvent chamber. The production performance is compared with an equivalent steam injection case based on the same Athabasca reservoir condition. Simulation results show that C6 is vaporized and transported into the vapor-solvent chamber. At the condensing condition, high temperature C6 reduces the viscosity of the bitumen more efficiently than steam and can displace out all the original oil. The oil production rate with C6 injection is about 1.5 to 2 times that of steam injection with oil recovery factor of about 100% oil initially-in-place. Most of the injected C6 can be recycled from the reservoir and from the produced oil, thus significantly reduce the solvent cost. Results of our study indicate that high-temperature solvent injection appears feasible although further technical and economic evaluation of the process is required.


2013 ◽  
Vol 11 (7) ◽  
pp. 2037-2050 ◽  
Author(s):  
P. Pourrezaei ◽  
A. Alpatova ◽  
P. Chelme-Ayala ◽  
L. A. Perez-Estrada ◽  
M. Jensen-Fontaine ◽  
...  

2017 ◽  
Vol 51 (5) ◽  
pp. 3102-3109 ◽  
Author(s):  
Jake A. Nesbitt ◽  
Matthew B. J. Lindsay
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document