scholarly journals Cost-Effective Detection of Perfluoroalkyl Carboxylic Acids with Gas Chromatography: Optimization of Derivatization Approaches and Method Validation

Author(s):  
Zhen Li ◽  
Hongwei Sun

The reliable quantification of perfluoroalkyl carboxylic acids (PFCAs) in environmental samples like surface water by using gas chromatography (GC) remains challenging because the polar PFCAs call for derivatization before injection and problems involving the integration of sample pretreatment and derivatization procedures. Here we proposed a cost-effective method for the GC based determination of C4–C12 PFCAs in surface water samples by integrating solid phase extraction and PFCAs anilide derivatization. First, we assessed the performance of different PFCAs derivatization methods, namely esterification and amidation. Esterification was unable to derivatize C4–C6 PFCAs. On the contrary, amidation procedures by using 2,4-difluoroaniline (DFA) and N,N′-dicyclohexylcarbodiimide (DCC) could successfully transform all the PFCA analogs to produce anilide derivatives, which could be easily detected by GC. Then the reaction conditions in the amidation approach were further optimized by using orthogonal design experiments. After optimizing the instrumental parameters of GC, the limits of detection (LOD) of this derivatization method were determined to be 1.14–6.32 μg L−1. Finally, in order to establish an intact method for the quantification of PFCAs in surface water samples, solid phase extraction (SPE) was used for extraction and cleanup, which was further integrated with the subsequent amidation process. The SPE-amidation-GC method was validated for application, with good accuracy and precision reflected by the PFCAs recoveries and derivatization of triplicates. The method reported here could provide a promising and cost-effective alternative for the simultaneous determination of C4–C12 PFCAs in environmental water samples.

Author(s):  
Kamran Bashir ◽  
Zhimin Luo ◽  
Guoning Chen ◽  
Hua Shu ◽  
Xia Cui ◽  
...  

Griseofulvin (GSF) is clinically employed to treat fungal infections in humans and animals. GSF was detected in surface waters as a pharmaceutical pollutant. GSF detection as an anthropogenic pollutant is considered as a possible source of drug resistance and risk factor in ecosystem. To address this concern, a new extraction and enrichment method was developed. GSF-surface molecularly imprinted polymers (GSF-SMIPs) were prepared and applied as solid phase extraction (SPE) sorbent. A dispersive solid phase extraction (DSPE) method was designed and combined with HPLC for the analysis of GSF in surface water samples. The performance of GSF-SMIPs was assessed for its potential to remove GSF from water samples. The factors affecting the removal efficiency such as sample pH and ionic strength were investigated and optimized. The DSPE conditions such as the amount of GSF-SMIPs, the extraction time, the type and volume of desorption solvents were also optimized. The established method is linear over the range of 0.1–100 µg/mL. The limits of detection and quantification were 0.01 and 0.03 µg/mL respectively. Good recoveries (91.6–98.8%) were achieved after DSPE. The intra-day and inter-day relative standard deviations were 0.8 and 4.3% respectively. The SMIPs demonstrated good removal efficiency (91.6%) as compared to powder activated carbon (67.7%). Moreover, the SMIPs can be reused 10 times for water samples. This is an additional advantage over single-use activated carbon and other commercial sorbents. This study provides a specific and sensitive method for the selective extraction and detection of GSF in surface water samples.


Sign in / Sign up

Export Citation Format

Share Document