scholarly journals Prediction of the Open-Water Performance of Ducted Propellers with a Panel Method

2018 ◽  
Vol 6 (1) ◽  
pp. 27 ◽  
Author(s):  
João Baltazar ◽  
Douwe Rijpkema ◽  
José Falcão de Campos ◽  
Johan Bosschers
Keyword(s):  
Open Water ◽  
Panel Method ◽  
Open Water Performance ◽  
Ducted Propellers

Recent Developments in Computational Methods for the Analysis of Ducted Propellers in Open Water

2019 ◽  
Vol 63 (4) ◽  
pp. 219-234
Author(s):  
João Baltazar ◽  
José A. C. Falcão de Campos ◽  
Johan Bosschers ◽  
Douwe Rijpkema
Keyword(s):  
Computational Methods ◽  
Open Water ◽  
Boundary Element Methods ◽  
Navier Stokes ◽  
Hydrodynamic Analysis ◽  
Numerical Predictions ◽  
Ducted Propeller ◽  
Recent Developments ◽  
Propeller Performance ◽  
Ducted Propellers

This article presents an overview of the recent developments at Instituto Superior Técnico and Maritime Research Institute Netherlands in applying computational methods for the hydrodynamic analysis of ducted propellers. The developments focus on the propeller performance prediction in open water conditions using boundary element methods and Reynolds-averaged Navier-Stokes solvers. The article starts with an estimation of the numerical errors involved in both methods. Then, the different viscous mechanisms involved in the ducted propeller flow are discussed and numerical procedures for the potential flow solution proposed. Finally, the numerical predictions are compared with experimental measurements.

Optimization of RANS Solver Simulation Setup for Propeller Open Water Performance Prediction

2015 ◽  
Author(s):  
Mohammed Islam ◽  
Fatima Jahra ◽  
Michael Doucet
Keyword(s):  
Domain Size ◽  
Open Water ◽  
Fractional Factorial ◽  
Navier Stokes ◽  
Calm Water ◽  
Simulation Results ◽  
Open Water Performance ◽  
Thrust And Torque ◽  
Simulation Time ◽  
Fixed Pitch

Mesh and domain optimization strategies for a RANS solver to accurately estimate the open water propulsive characteristics of fixed pitch propellers are proposed based on examining the effect of different mesh and computation domain parameters. The optimized mesh and domain size parameters were selected using Design of Experiments (DoE) methods enabling simulations to be carried out in a limited memory environment, and in a timely manner; without compromising the accuracy of results. A Reynolds-Averaged Navier Stokes solver is used to predict the propulsive performance of a fixed pitch propeller. The predicted thrust and torque for the propeller were compared to the corresponding measurements. A total of six meshing parameters were selected that could affect the computational results of propeller open water performance. A two-level fractional factorial design was used to screen out parameters that do not significantly contribute to explaining the dependent parameters: namely simulation time, propeller thrust and propeller torque. A total of 32 simulations were carried out only to find out that the selected six meshing parameters were significant in defining the response parameters. Optimum values of each of the input parameters were obtained for the DOE technique and additional simulations were run with those parameters. The simulation results were validated using open water experimental results of the same propeller. It was found that with the optimized meshing arrangement, the propeller opens simulation time was reduced by at least a factor of 6 as compared to the generally popular meshing arrangement. Also, the accuracy of propulsive characteristics was improved by up to 50% as compared to published simulation results. The methodologies presented in this paper can be similarly applied to other simulations such as calm water ship resistance, ship propulsion to systematically derive the optimized meshing arrangement for simulations with minimal simulation time and maximum accuracy. This investigation was carried out using STAR-CCM+, a commercial CFD package; however the findings can be applied to any RANS solver.

An Investigation Into the Effect of Biofouling on Full-Scale Propeller Performance Using CFD

2019 ◽  
Author(s):  
Soonseok Song ◽  
Yigit Kemal Demirel ◽  
Mehmet Atlar
Keyword(s):  
Open Water ◽  
Full Scale ◽  
Roughness Effect ◽  
Thrust Coefficient ◽  
Propulsion Performance ◽  
Negative Effect ◽  
Precise Prediction ◽  
Torque Coefficient ◽  
Open Water Performance ◽  
Propeller Performance

Abstract The negative effect of biofouling on ship resistance has been investigated since the early days of naval architecture. However, for more precise prediction of fuel consumption of ships, understanding the effect of biofouling on ship propulsion performance is also important. In this study, CFD simulations for the full-scale performance of KP505 propeller in open water, including the presence of marine biofouling, were conducted. To predict the effect of barnacle fouling on the propeller performance, experimentally obtained roughness functions of barnacle fouling were employed in the wall-function of the CFD software. The roughness effect of barnacles of varying sizes and coverages on the propeller open water performance was predicted for advance coefficients ranging from 0.2 to 0.8. From the simulations, drastic effects of barnacle fouling on the propeller open water performance were found. The result suggests that the thrust coefficient decreases while the torque coefficient increases with increasing level of surface fouling, which leads to a reduction of the open water efficiency of the propeller. Further investigations into the roughness effect on the pressure and velocity field, surface pressure and wall shear stress, and propeller vortices were examined.

scholarly journals Improving accuracy and efficiency of CFD predictions of propeller open water performance

2019 ◽  
Vol 16 (1) ◽  
pp. 1-20
Author(s):  
Mohammed Islam ◽  
Fatima Jahra
Keyword(s):  
Domain Size ◽  
Open Water ◽  
Navier Stokes ◽  
Calm Water ◽  
Open Water Performance ◽  
Improving Accuracy ◽  
Accuracy Of Results ◽  
Thrust And Torque ◽  
Simulation Time ◽  
Fixed Pitch

This research proposes mesh and domain optimization strategies for a popular Computational Fluid Dynamics (CFD) technique to estimate the open water propulsive characteristics of fixed pitch propellers accurately and time-efficiently based on examining the effect of various mesh and computation domain parameters. It used a Reynolds-Averaged Navier-Stokes (RANS) solver to predict the propulsive performance of a fixed pitch propeller with varied meshing, simulation domain and setup parameters. The optimized mesh and domain size parameters were selected using Design of Experiments (DoE) methods enabling simulations in a limited memory and in a timely manner without compromising the accuracy of results. The predicted thrust and torque for the propeller were compared to the corresponding measurements for determining the prediction accuracy. The authors found that the optimized meshing and setup arrangements reduced the propeller opens simulation time by at least a factor of six as compared to the generally popular CFD parameter setup. In addition, the accuracy of propulsive characteristics was improved by up to 50% as compared to published simulation results. The methodologies presented in this paper can be similarly applied to other simulations such as calm water ship resistance, ship propulsion etc. to systematically derive the optimized meshing arrangement for simulations with minimal simulation time and maximum accuracy. This investigation was carried out using a commercial CFD package; however, the findings can be applied to any RANS solver.

scholarly journals Propeller Performance Penalty of Biofouling: Computational Fluid Dynamics Prediction

2020 ◽  
Vol 142 (6) ◽  
Author(s):  
Soonseok Song ◽  
Yigit Kemal Demirel ◽  
Mehmet Atlar
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Flow Characteristics ◽  
Open Water ◽  
Roughness Effect ◽  
Thrust Coefficient ◽  
Propulsion Performance ◽  
Negative Effect ◽  
Open Water Performance ◽  
Propeller Performance

Abstract The negative effect of biofouling on ship resistance has been investigated since the early days of naval architecture. However, for more precise prediction of fuel consumption of ships, understanding the effect of biofouling on ship propulsion performance is also important. In this study, computational fluid dynamics (CFD) simulations for the full-scale performance of KP505 propeller in open water, including the presence of marine biofouling, were conducted. To predict the effect of barnacle fouling on the propeller performance, experimentally obtained roughness functions of barnacle fouling were used in the wall-function of the CFD software. The roughness effect of barnacles of varying sizes and coverages on the propeller open water performance was predicted for advance coefficients ranging from 0.2 to 0.8. From the simulations, drastic effects of barnacle fouling on the propeller open water performance were found. The result suggests that the thrust coefficient decreases while the torque coefficient increases with increasing level of surface fouling, which leads to a reduction of the open water efficiency of the propeller. Using the obtained result, the penalty of propeller fouling on the required shaft power was predicted. Finally, further investigations were made into the roughness effect on the flow characteristics around the propeller and the results were in correspondence with the findings on the propeller open water performance.

Sign in / Sign up

Export Citation Format

Share Document