Validation of rans predictions of open water performance of a highly skewed propeller with experiments

2006 ◽  
Vol 18 (S1) ◽  
pp. 509-517
Author(s):  
Da-Qing Li
Keyword(s):  
Open Water ◽  
Open Water Performance

Optimization of RANS Solver Simulation Setup for Propeller Open Water Performance Prediction

2015 ◽  
Author(s):  
Mohammed Islam ◽  
Fatima Jahra ◽  
Michael Doucet
Keyword(s):  
Domain Size ◽  
Open Water ◽  
Fractional Factorial ◽  
Navier Stokes ◽  
Calm Water ◽  
Simulation Results ◽  
Open Water Performance ◽  
Thrust And Torque ◽  
Simulation Time ◽  
Fixed Pitch

Mesh and domain optimization strategies for a RANS solver to accurately estimate the open water propulsive characteristics of fixed pitch propellers are proposed based on examining the effect of different mesh and computation domain parameters. The optimized mesh and domain size parameters were selected using Design of Experiments (DoE) methods enabling simulations to be carried out in a limited memory environment, and in a timely manner; without compromising the accuracy of results. A Reynolds-Averaged Navier Stokes solver is used to predict the propulsive performance of a fixed pitch propeller. The predicted thrust and torque for the propeller were compared to the corresponding measurements. A total of six meshing parameters were selected that could affect the computational results of propeller open water performance. A two-level fractional factorial design was used to screen out parameters that do not significantly contribute to explaining the dependent parameters: namely simulation time, propeller thrust and propeller torque. A total of 32 simulations were carried out only to find out that the selected six meshing parameters were significant in defining the response parameters. Optimum values of each of the input parameters were obtained for the DOE technique and additional simulations were run with those parameters. The simulation results were validated using open water experimental results of the same propeller. It was found that with the optimized meshing arrangement, the propeller opens simulation time was reduced by at least a factor of 6 as compared to the generally popular meshing arrangement. Also, the accuracy of propulsive characteristics was improved by up to 50% as compared to published simulation results. The methodologies presented in this paper can be similarly applied to other simulations such as calm water ship resistance, ship propulsion to systematically derive the optimized meshing arrangement for simulations with minimal simulation time and maximum accuracy. This investigation was carried out using STAR-CCM+, a commercial CFD package; however the findings can be applied to any RANS solver.

Open water performance comparison between hub-type and hubless rim driven thrusters based on CFD method

2015 ◽  
Vol 103 ◽  
pp. 55-63 ◽  
Author(s):  
Bao-wei Song ◽  
You-jiang Wang ◽  
Wen-long Tian
Keyword(s):  
Open Water ◽  
Performance Comparison ◽  
Open Water Performance ◽  
Cfd Method

An Investigation Into the Effect of Biofouling on Full-Scale Propeller Performance Using CFD

2019 ◽  
Author(s):  
Soonseok Song ◽  
Yigit Kemal Demirel ◽  
Mehmet Atlar
Keyword(s):  
Open Water ◽  
Full Scale ◽  
Roughness Effect ◽  
Thrust Coefficient ◽  
Propulsion Performance ◽  
Negative Effect ◽  
Precise Prediction ◽  
Torque Coefficient ◽  
Open Water Performance ◽  
Propeller Performance

Abstract The negative effect of biofouling on ship resistance has been investigated since the early days of naval architecture. However, for more precise prediction of fuel consumption of ships, understanding the effect of biofouling on ship propulsion performance is also important. In this study, CFD simulations for the full-scale performance of KP505 propeller in open water, including the presence of marine biofouling, were conducted. To predict the effect of barnacle fouling on the propeller performance, experimentally obtained roughness functions of barnacle fouling were employed in the wall-function of the CFD software. The roughness effect of barnacles of varying sizes and coverages on the propeller open water performance was predicted for advance coefficients ranging from 0.2 to 0.8. From the simulations, drastic effects of barnacle fouling on the propeller open water performance were found. The result suggests that the thrust coefficient decreases while the torque coefficient increases with increasing level of surface fouling, which leads to a reduction of the open water efficiency of the propeller. Further investigations into the roughness effect on the pressure and velocity field, surface pressure and wall shear stress, and propeller vortices were examined.

scholarly journals Prediction of the Open-Water Performance of Ducted Propellers with a Panel Method

2018 ◽  
Vol 6 (1) ◽  
pp. 27 ◽  
Author(s):  
João Baltazar ◽  
Douwe Rijpkema ◽  
José Falcão de Campos ◽  
Johan Bosschers
Keyword(s):  
Open Water ◽  
Panel Method ◽  
Open Water Performance ◽  
Ducted Propellers

scholarly journals Improving accuracy and efficiency of CFD predictions of propeller open water performance

2019 ◽  
Vol 16 (1) ◽  
pp. 1-20
Author(s):  
Mohammed Islam ◽  
Fatima Jahra
Keyword(s):  
Domain Size ◽  
Open Water ◽  
Navier Stokes ◽  
Calm Water ◽  
Open Water Performance ◽  
Improving Accuracy ◽  
Accuracy Of Results ◽  
Thrust And Torque ◽  
Simulation Time ◽  
Fixed Pitch

This research proposes mesh and domain optimization strategies for a popular Computational Fluid Dynamics (CFD) technique to estimate the open water propulsive characteristics of fixed pitch propellers accurately and time-efficiently based on examining the effect of various mesh and computation domain parameters. It used a Reynolds-Averaged Navier-Stokes (RANS) solver to predict the propulsive performance of a fixed pitch propeller with varied meshing, simulation domain and setup parameters. The optimized mesh and domain size parameters were selected using Design of Experiments (DoE) methods enabling simulations in a limited memory and in a timely manner without compromising the accuracy of results. The predicted thrust and torque for the propeller were compared to the corresponding measurements for determining the prediction accuracy. The authors found that the optimized meshing and setup arrangements reduced the propeller opens simulation time by at least a factor of six as compared to the generally popular CFD parameter setup. In addition, the accuracy of propulsive characteristics was improved by up to 50% as compared to published simulation results. The methodologies presented in this paper can be similarly applied to other simulations such as calm water ship resistance, ship propulsion etc. to systematically derive the optimized meshing arrangement for simulations with minimal simulation time and maximum accuracy. This investigation was carried out using a commercial CFD package; however, the findings can be applied to any RANS solver.

scholarly journals Experimental Spindle Torque and Open-Water Performance of Two Skewed Controllable-Pitch Propellers

1975 ◽  
Author(s):  
Robert J. Boswell ◽  
John J. Nelka ◽  
Richard D. Kader
Keyword(s):  
Open Water ◽  
Open Water Performance

scholarly journals Propeller Performance Penalty of Biofouling: Computational Fluid Dynamics Prediction

2020 ◽  
Vol 142 (6) ◽  
Author(s):  
Soonseok Song ◽  
Yigit Kemal Demirel ◽  
Mehmet Atlar
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Flow Characteristics ◽  
Open Water ◽  
Roughness Effect ◽  
Thrust Coefficient ◽  
Propulsion Performance ◽  
Negative Effect ◽  
Open Water Performance ◽  
Propeller Performance

Abstract The negative effect of biofouling on ship resistance has been investigated since the early days of naval architecture. However, for more precise prediction of fuel consumption of ships, understanding the effect of biofouling on ship propulsion performance is also important. In this study, computational fluid dynamics (CFD) simulations for the full-scale performance of KP505 propeller in open water, including the presence of marine biofouling, were conducted. To predict the effect of barnacle fouling on the propeller performance, experimentally obtained roughness functions of barnacle fouling were used in the wall-function of the CFD software. The roughness effect of barnacles of varying sizes and coverages on the propeller open water performance was predicted for advance coefficients ranging from 0.2 to 0.8. From the simulations, drastic effects of barnacle fouling on the propeller open water performance were found. The result suggests that the thrust coefficient decreases while the torque coefficient increases with increasing level of surface fouling, which leads to a reduction of the open water efficiency of the propeller. Using the obtained result, the penalty of propeller fouling on the required shaft power was predicted. Finally, further investigations were made into the roughness effect on the flow characteristics around the propeller and the results were in correspondence with the findings on the propeller open water performance.

A study on the effect of the rake angle on the performance of marine propellers

2011 ◽  
Vol 226 (4) ◽  
pp. 940-955 ◽  
Author(s):  
A N Hayati ◽  
S M Hashemi ◽  
M Shams
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Design Process ◽  
Flow Characteristics ◽  
Open Water ◽  
Rake Angle ◽  
Marine Propellers ◽  
Propeller Design ◽  
Open Water Performance ◽  
Dynamics Method

In this study, the open water performance of three propellers with diverse rake angles was investigated by computational fluid dynamics method. The objective of this study was to find out the influence of the rake angle on the performance of conventional screw propellers. For this purpose, first, the obtained results for three B-series propellers were validated against the empirical results and then by modifying the rake angle, different models were investigated by the same method. Flow characteristics were examined for the models and the evolvement of vortices on different planes around the propeller were compared. The results suggest that in case of conventional screw propellers with linear rake distribution, while the effect of the rake angle on the propeller efficiency is not significant, the augmentation of this parameter improves the propeller thrust, especially at high propeller loads, but at the same time, the required torque increases, which is not desirable for the propeller design process.

Sign in / Sign up

Export Citation Format

Share Document