Effects of Molybdenum Addition on Rolling Contact Fatigue of Locomotive Wheels under Rolling-Sliding Condition

Rolling contact fatigue (RCF) damages often occur, sometimes even leading to shelling on locomotive wheel treads. In this work, the RCF damage behaviors of two locomotive wheel materials with different molybdenum (Mo) contents were studied, and the influence of depth of wheel material was explored as well. The result indicates that with the increase in the Mo content from 0.01 wt.% (wheel 1, i.e., a standard wheel) to 0.04 wt.% (wheel 2, i.e., an improved wheel), the proeutectoid ferrite content and the interlamellar spacing of pearlite decreased, the depth and length of the RCF cracks increased and the average RCF live of locomotive wheel steel improved by 34.06%. With the increase in the depth of material, the proeutectoid ferrite content and the interlamellar spacing of pearlite increased, the depth of RCF cracks increased, the length of RCF cracks of wheel 1 increased and then decreased whereas that of wheel 2 decreased, the RCF live showed a decrease trend for wheel 1, while the RCF life increased and then decreased for wheel 2. The processes of shelling can be divided into three patterns: cracks propagating back to the surface, crack connection and fragments of surface materials.

Download Full-text

The Influence of Wheel/Rail Contact Conditions on the Microstructure and Hardness of Railway Wheels

The Scientific World JOURNAL ◽

10.1155/2014/209752 ◽

2014 ◽

Vol 2014 ◽

pp. 1-16 ◽

Cited By ~ 12

Author(s):

Paul Molyneux-Berry ◽

Claire Davis ◽

Adam Bevan

Keyword(s):

Rolling Contact Fatigue ◽

Contact Fatigue ◽

Rolling Contact ◽

Dynamic Simulations ◽

Near Surface ◽

Wheel Rim ◽

Ferrite Fraction ◽

Proeutectoid Ferrite ◽

Tangential Forces ◽

Railway Wheels

The susceptibility of railway wheels to wear and rolling contact fatigue damage is influenced by the properties of the wheel material. These are influenced by the steel composition, wheel manufacturing process, and thermal and mechanical loading during operation. The in-service properties therefore vary with depth below the surface and with position across the wheel tread. This paper discusses the stress history at the wheel/rail contact (derived from dynamic simulations) and observed variations in hardness and microstructure. It is shown that the hardness of an “in-service” wheel rim varies significantly, with three distinct effects. The underlying hardness trend with depth can be related to microstructural changes during manufacturing (proeutectoid ferrite fraction and pearlite lamellae spacing). The near-surface layer exhibits plastic flow and microstructural shear, especially in regions which experience high tangential forces when curving, with consequentially higher hardness values. Between 1 mm and 7 mm depth, the wheel/rail contacts cause stresses exceeding the material yield stress, leading to work hardening, without a macroscopic change in microstructure. These changes in material properties through the depth of the wheel rim would tend to increase the likelihood of crack initiation on wheels toward the end of their life. This correlates with observations from several train fleets.

Download Full-text