scholarly journals Research Progress of Proton Exchange Membrane Failure and Mitigation Strategies

Materials ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2591
Author(s):  
Yijing Xing ◽  
Haibin Li ◽  
George Avgouropoulos
Keyword(s):  
Proton Exchange Membrane ◽  
Proton Exchange ◽  
Operating Conditions ◽  
Mitigation Strategies ◽  
Chemical Degradation ◽  
Research Progress ◽  
System Control ◽  
Degradation Behavior ◽  
Degradation Failure ◽  
Exchange Membrane

Proton exchange membrane (PEM) is critical for the efficient, reliable and safe operation of proton exchange membrane fuel cells (PEMFC). The lifetime of PEM is the main factor restricting the commercialization of PEMFC. The complexity of operating conditions, such as open-circuit/idling, dynamic load and startup-shutdown under automotive conditions, on PEMFC will cause the mechanical and chemical degradation of PEM and affect the service life of PEMFC. In order to understand the degradation behavior and durability of PEM, this paper presents an overview of the degradation failure mechanism and mitigation strategies of PEM. The mechanical and chemical degradation behavior of PEM and its causes, as well as the mitigation strategies are discussed in order to give a direction for PEM design and fuel cell system control strategy. It is proposed as a primary principle in order to further develop and promote the durability of PEM, to focus on the material improvement and system engineering.

scholarly journals Design of Incremental Conductance Sliding Mode MPPT Control Applied by Integrated Photovoltaic and Proton Exchange Membrane Fuel Cell System under Various Operating Conditions for BLDC Motor

2015 ◽  
Vol 2015 ◽  
pp. 1-14 ◽  
Author(s):  
Jehun Hahm ◽  
Hyoseok Kang ◽  
Jaeho Baek ◽  
Heejin Lee ◽  
Mignon Park
Keyword(s):  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Sliding Mode ◽  
Proton Exchange ◽  
Operating Conditions ◽  
System Control ◽  
Atmospheric Conditions ◽  
Pv Array ◽  
Incremental Conductance ◽  
Exchange Membrane

This paper proposes an integrated photovoltaic (PV) and proton exchange membrane fuel cell (PEMFC) system for continuous energy harvesting under various operating conditions for use with a brushless DC motor. The proposed scheme is based on the incremental conductance (IncCond) algorithm combined with the sliding mode technique. Under changing atmospheric conditions, the energy conversion efficiency of a PV array is very low, leading to significant power losses. Consequently, increasing efficiency by means of maximum power point tracking (MPPT) is particularly important. To manage such a hybrid system, control strategies need to be established to achieve the aim of the distributed system. Firstly, a Matlab/Simulink based model of the PV and PEMFC is developed and validated, as well as the incremental conductance sliding (ICS) MPPT technique; then, different MPPT algorithms are employed to control the PV array under nonuniform temperature and insolation conditions, to study these algorithms effectiveness under various operating conditions. Conventional techniques are easy to implement but produce oscillations at MPP. Compared to these techniques, the proposed technique is more efficient; it produces less oscillation at MPP in the steady state and provides more precise tracking.

scholarly journals Modelling of Humidity Dynamics for Open-Cathode Proton Exchange Membrane Fuel Cell

2021 ◽  
Vol 12 (3) ◽  
pp. 106
Author(s):  
Fengxiang Chen ◽  
Liming Zhang ◽  
Jieran Jiao
Keyword(s):  
Fuel Cell ◽  
Mass Flow ◽  
Proton Exchange Membrane ◽  
Flow Model ◽  
Transport Theory ◽  
Gas Diffusion ◽  
Proton Exchange ◽  
Operating Conditions ◽  
Output Performance ◽  
Exchange Membrane

The durability and output performance of a fuel cell is highly influenced by the internal humidity, while in most developed models of open-cathode proton exchange membrane fuel cells (OC-PEMFC) the internal water content is viewed as a fixed value. Based on mass and energy conservation law, mass transport theory and electrochemistry principles, the model of humidity dynamics for OC-PEMFC is established in Simulink® environment, including the electrochemical model, mass flow model and thermal model. In the mass flow model, the water retention property and oxygen transfer characteristics of the gas diffusion layer is modelled. The simulation indicates that the internal humidity of OC-PEMFC varies with stack temperature and operating conditions, which has a significant influence on stack efficiency and output performance. In order to maintain a good internal humidity state during operation, this model can be used to determine the optimal stack temperature and for the design of a proper control strategy.

Theoretical Analysis on the Autothermal Reforming Process of Ethanol as Fuel for a Proton Exchange Membrane Fuel Cell System

2006 ◽  
Vol 4 (4) ◽  
pp. 468-473 ◽  
Author(s):  
Alessandra Perna
Keyword(s):  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Pem Fuel Cell ◽  
Cell System ◽  
Autothermal Reforming ◽  
Proton Exchange ◽  
Operating Conditions ◽  
Hydrogen Yield ◽  
Fuel Cell System ◽  
Exchange Membrane

The purpose of this work is to investigate, by a thermodynamic analysis, the effects of the process variables on the performance of an autothermal reforming (ATR)-based fuel processor, operating on ethanol as fuel, integrated into an overall proton exchange membrane (PEM) fuel cell system. This analysis has been carried out finding the better operating conditions to maximize hydrogen yield and to minimize CO carbon monoxide production. In order to evaluate the overall efficiency of the system, PEM fuel cell operations have been analyzed by an available parametric model.

scholarly journals Faraday’s Efficiency Modeling of a Proton Exchange Membrane Electrolyzer Based on Experimental Data

Energies ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4792 ◽  
Author(s):  
Burin Yodwong ◽  
Damien Guilbert ◽  
Matheepot Phattanasak ◽  
Wattana Kaewmanee ◽  
Melika Hinaje ◽  
...  
Keyword(s):  
High Pressure ◽  
Hydrogen Pressure ◽  
Proton Exchange Membrane ◽  
Proton Exchange ◽  
Gas Pressure ◽  
Operating Conditions ◽  
Mechanical Resistance ◽  
Pem Electrolyzer ◽  
Hydrogen Crossover ◽  
Exchange Membrane

In electrolyzers, Faraday’s efficiency is a relevant parameter to assess the amount of hydrogen generated according to the input energy and energy efficiency. Faraday’s efficiency expresses the faradaic losses due to the gas crossover current. The thickness of the membrane and operating conditions (i.e., temperature, gas pressure) may affect the Faraday’s efficiency. The developed models in the literature are mainly focused on alkaline electrolyzers and based on the current and temperature change. However, the modeling of the effect of gas pressure on Faraday’s efficiency remains a major concern. In proton exchange membrane (PEM) electrolyzers, the thickness of the used membranes is very thin, enabling decreasing ohmic losses and the membrane to operate at high pressure because of its high mechanical resistance. Nowadays, high-pressure hydrogen production is mandatory to make its storage easier and to avoid the use of an external compressor. However, when increasing the hydrogen pressure, the hydrogen crossover currents rise, particularly at low current densities. Therefore, faradaic losses due to the hydrogen crossover increase. In this article, experiments are performed on a commercial PEM electrolyzer to investigate Faraday’s efficiency based on the current and hydrogen pressure change. The obtained results have allowed modeling the effects of Faraday’s efficiency by a simple empirical model valid for the studied PEM electrolyzer stack. The comparison between the experiments and the model shows very good accuracy in replicating Faraday’s efficiency.

Durability study and lifetime prediction of baseline proton exchange membrane fuel cell under severe operating conditions

2008 ◽  
Vol 182 (2) ◽  
pp. 469-475 ◽  
Author(s):  
M. Marrony ◽  
R. Barrera ◽  
S. Quenet ◽  
S. Ginocchio ◽  
L. Montelatici ◽  
...  
Keyword(s):  
Fuel Cell ◽  
Proton Exchange Membrane ◽  
Proton Exchange ◽  
Operating Conditions ◽  
Lifetime Prediction ◽  
Exchange Membrane
Sign in / Sign up

Export Citation Format

Share Document