scholarly journals The Cascade Hilbert-Zero Decomposition: A Novel Method for Peaks Resolution and Its Application to Raman Spectra

Mathematics ◽  
2021 ◽  
Vol 9 (21) ◽  
pp. 2802
Author(s):  
Eugene B. Postnikov ◽  
Elena A. Lebedeva ◽  
Andrey Yu. Zyubin ◽  
Anastasia I. Lavrova
Keyword(s):  
Raman Spectra ◽  
Practical Case ◽  
Zero Crossing ◽  
Spectral Peaks ◽  
Novel Method ◽  
Resolution Of Overlapping Peaks ◽  
Different Origins ◽  
Noisy Background ◽  
Complicated Task

Raman spectra of biological objects are sufficiently complex since they are comprised of wide diffusive spectral peaks over a noisy background. This makes the resolution of individual closely positioned components a complicated task. Here we propose a method for constructing an approximation of such systems by a series, respectively, to shifts of the Gaussian functions with different adjustable dispersions. It is based on the coordination of the Gaussian peaks’ location with the zeros of the signal’s Hilbert transform. The resolution of overlapping peaks is achieved by applying this procedure in a hierarchical cascade way, subsequently excluding peaks of each level of decomposition. Both the mathematical rationale for the localization of intervals, where the zero crossing of the Hilbert-transformed uni- and multimodal mixtures of Gaussians occurs, and the step-by-step outline of the numerical algorithm are provided and discussed. As a practical case study, we analyze results of the processing of a complicated Raman spectrum obtained from a strain of Mycobacterium tuberculosis. However, the proposed method can be applied to signals of different origins formed by overlapped localized pulses too.

A novel method for the determination of linting propensity of paper

TAPPI Journal ◽  
2012 ◽  
Vol 11 (10) ◽  
pp. 9-17
Author(s):  
ALESSANDRA GERLI ◽  
LEENDERT C. EIGENBROOD
Keyword(s):  
Ash Content ◽  
The Novel ◽  
Offset Printing ◽  
Excellent Correlation ◽  
End Conditions ◽  
Bottom Side ◽  
Novel Method ◽  
Total Fraction

A novel method was developed for the determination of linting propensity of paper based on printing with an IGT printability tester and image analysis of the printed strips. On average, the total fraction of the surface removed as lint during printing is 0.01%-0.1%. This value is lower than those reported in most laboratory printing tests, and more representative of commercial offset printing applications. Newsprint paper produced on a roll/blade former machine was evaluated for linting propensity using the novel method and also printed on a commercial coldset offset press. Laboratory and commercial printing results matched well, showing that linting was higher for the bottom side of paper than for the top side, and that linting could be reduced on both sides by application of a dry-strength additive. In a second case study, varying wet-end conditions were used on a hybrid former machine to produce four paper reels, with the goal of matching the low linting propensity of the paper produced on a machine with gap former configuration. We found that the retention program, by improving fiber fines retention, substantially reduced the linting propensity of the paper produced on the hybrid former machine. The papers were also printed on a commercial coldset offset press. An excellent correlation was found between the total lint area removed from the bottom side of the paper samples during laboratory printing and lint collected on halftone areas of the first upper printing unit after 45000 copies. Finally, the method was applied to determine the linting propensity of highly filled supercalendered paper produced on a hybrid former machine. In this case, the linting propensity of the bottom side of paper correlated with its ash content.

Failure Analysis Case Study of a 1.5 Meter Space Flex Harness

2017 ◽  
Author(s):  
Erick Kim ◽  
Kamjou Mansour ◽  
Gil Garteiz ◽  
Javeck Verdugo ◽  
Ryan Ross ◽  
...  
Keyword(s):  
Failure Analysis ◽  
Failure Modes ◽  
Field Of View ◽  
Area Of Interest ◽  
Air Stream ◽  
Novel Method ◽  
Temperature Controlled ◽  
Non Destructive ◽  
Failure Site

Abstract This paper presents the failure analysis on a 1.5m flex harness for a space flight instrument that exhibited two failure modes: global isolation resistances between all adjacent traces measured tens of milliohm and lower resistance on the order of 1 kiloohm was observed on several pins. It shows a novel method using a temperature controlled air stream while monitoring isolation resistance to identify a general area of interest of a low isolation resistance failure. The paper explains how isolation resistance measurements were taken and details the steps taken in both destructive and non-destructive analyses. In theory, infrared hotspot could have been completed along the length of the flex harness to locate the failure site. However, with a field of view of approximately 5 x 5 cm, this technique would have been time prohibitive.

scholarly journals A Holistic Approach to Integrate and Evaluate Sustainable Development in Higher Education. The Case Study of the University of the Basque Country

2021 ◽  
Vol 13 (1) ◽  
pp. 392
Author(s):  
Estibaliz Sáez de Cámara ◽  
Idoia Fernández ◽  
Nekane Castillo-Eguskitza
Keyword(s):  
Higher Education ◽  
Sustainable Development ◽  
Basque Country ◽  
Holistic Approach ◽  
Institutional Setting ◽  
Practical Case ◽  
Development Indicators ◽  
Agenda 2030 ◽  
The University

Since the United Nations (UN) approved the Agenda 2030 for Sustainable Development in 2015, higher education institutions have increasingly demonstrated their commitment by supporting several initiatives. Although a great deal of progress has been made, there is still a lack of integrative approaches to truly implement Sustainable Development Goals (SDGs) in higher education. This paper presents a practical case that illustrates how to design and articulate SDGs within an institutional setting adopting a holistic approach: EHUagenda 2030 plan of the University of the Basque Country (UPV/EHU). It is based on empirical inquiry into global and holistic sustainable transformation and a real experience to move towards a verifiable and pragmatic contribution to sustainability. This plan describes the contribution to 12 of the 17 SDGs, along with three sectorial plans (Equality Campus, Inclusion Campus and Planet Campus), as well as the refocus of the UPV/EHU’s Educational Model and the panel of sustainable development indicators, which addresses the technical aspects of monitoring the SDGs. The methodology (mapping; mainstreaming; diagnosis and definition and, finally, estimation) is systematic and replicable in other universities yet to embark upon this integration. This case study makes a contribution towards the understanding of the complexity of the changes in Higher Education and the ways to approach it.

Sign in / Sign up

Export Citation Format

Share Document