scholarly journals Experimental Determination of the MnO Activity Coefficient in High-Manganese Slags Using the Chemical Equilibrium Method

Metals ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1190
Author(s):  
Elizaveta Cheremisina ◽  
Xu Gao ◽  
Shigeru Ueda ◽  
Shin-ya Kitamura ◽  
Ryo Yamashina ◽  
...  
Keyword(s):  
Activity Coefficient ◽  
Chemical Equilibrium ◽  
Inductively Coupled Plasma ◽  
Slag Composition ◽  
Theoretical Calculations ◽  
Regular Solution Model ◽  
Slag System ◽  
Atomic Emission ◽  
Partition Ratio ◽  
Equilibrium Method

The thermodynamics of manganese oxide in high-MnO-containing slags was investigated using the chemical equilibrium method in the temperature range of 1623 to 1723 K. MnO-SiO2-Al2O3 slags were brought into equilibrium with molten silver (Ag) under controlled CO/CO2 gas atmosphere. The equilibrium Mn concentration in the silver was measured by ICP-AES (inductively coupled plasma atomic emission spectroscopy) analysis after the experiment. Slag samples were analyzed by EPMA (electron probe microanalyzer) analysis. The obtained activity aMnO and activity coefficient γMnO were derived as a function of the slag composition and temperature. The activity coefficient of MnO within the investigated slag system increased with an increasing MnO/SiO2 ratio. The derived temperature dependence of the activity coefficient and partition ratio of Mn between the metal and the slag was strongly influenced by the slag composition. The thermodynamic assessment of the activity and activity coefficient of MnO was carried out by applying the regular solution model (RSM) on the basis of interaction energies of the cations and with FactSageTM 7.3. The theoretical calculations were compared with the experimentally derived values.

Rapid Catalyst Capture Enables Metal-Free Parahydrogen-Based Hyperpolarized Contrast Agents

2018 ◽  
Author(s):  
Danila Barskiy ◽  
Lucia Ke ◽  
Xingyang Li ◽  
Vincent Stevenson ◽  
Nevin Widarman ◽  
...  
Keyword(s):  
Magnetic Resonance ◽  
Contrast Agents ◽  
Inductively Coupled Plasma ◽  
Organometallic Compounds ◽  
Atomic Emission ◽  
Platinum Group Metals ◽  
Resonance Spectroscopy ◽  
Plasma Atomic Emission ◽  
Inductively Coupled

<p>Hyperpolarization techniques based on the use of parahydrogen provide orders of magnitude signal enhancement for magnetic resonance spectroscopy and imaging. The main drawback limiting widespread applicability of parahydrogen-based techniques in biomedicine is the presence of organometallic compounds (the polarization transfer catalysts) in solution with hyperpolarized contrast agents. These catalysts are typically complexes of platinum-group metals and their administration in vivo should be avoided.</p> <p><br></p><p>Herein, we show how extraction of a hyperpolarized compound from an organic phase to an aqueous phase combined with a rapid (less than 10 seconds) Ir-based catalyst capture by metal scavenging agents can produce pure parahydrogen-based hyperpolarized contrast agents as demonstrated by high-resolution nuclear magnetic resonance (NMR) spectroscopy and inductively coupled plasma atomic emission spectroscopy (ICP-AES). The presented methodology enables fast and efficient means of producing pure hyperpolarized aqueous solutions for biomedical and other uses.</p>

Rapid Catalyst Capture Enables Metal-Free Parahydrogen-Based Hyperpolarized Contrast Agents

2018 ◽  
Author(s):  
Danila Barskiy ◽  
Lucia Ke ◽  
Xingyang Li ◽  
Vincent Stevenson ◽  
Nevin Widarman ◽  
...  
Keyword(s):  
Magnetic Resonance ◽  
Contrast Agents ◽  
Inductively Coupled Plasma ◽  
Organometallic Compounds ◽  
Atomic Emission ◽  
Platinum Group Metals ◽  
Resonance Spectroscopy ◽  
Plasma Atomic Emission ◽  
Inductively Coupled

<p>Hyperpolarization techniques based on the use of parahydrogen provide orders of magnitude signal enhancement for magnetic resonance spectroscopy and imaging. The main drawback limiting widespread applicability of parahydrogen-based techniques in biomedicine is the presence of organometallic compounds (the polarization transfer catalysts) in solution with hyperpolarized contrast agents. These catalysts are typically complexes of platinum-group metals and their administration in vivo should be avoided.</p> <p><br></p><p>Herein, we show how extraction of a hyperpolarized compound from an organic phase to an aqueous phase combined with a rapid (less than 10 seconds) Ir-based catalyst capture by metal scavenging agents can produce pure parahydrogen-based hyperpolarized contrast agents as demonstrated by high-resolution nuclear magnetic resonance (NMR) spectroscopy and inductively coupled plasma atomic emission spectroscopy (ICP-AES). The presented methodology enables fast and efficient means of producing pure hyperpolarized aqueous solutions for biomedical and other uses.</p>

Silicate analysis of carbonated rocks using ICP-AES with calibration by the concentration ratio

2020 ◽  
Vol 86 (5) ◽  
pp. 16-21
Author(s):  
T. A. Karimova ◽  
G. L. Buchbinder ◽  
S. V. Kachin
Keyword(s):  
Inductively Coupled Plasma ◽  
Concentration Ratio ◽  
Total Error ◽  
Atomic Emission ◽  
Emission Spectrometry ◽  
Calibration Error ◽  
Plasma Atomic Emission Spectrometry ◽  
Standard Samples ◽  
Inductively Coupled ◽  
Carbonate Materials

Calibration by the concentration ratio provides better metrological characteristics compared to other calibration modes when using the inductively coupled plasma atomic emission spectrometry (ICP-AES) for analysis of geological samples and technical materials on their base. The main reasons for the observed improvement are: i) elimination of the calibration error of measuring vessels and the error of weighing samples of the analyzed materials from the total error of the analysis; ii) high intensity of the lines of base element; and iii) higher accuracy of measuring the ratio of intensities compared to that of measuring the absolute intensities. Calcium oxide is better suited as a base when using calibration by the concentration ratio in analysis of carbonate rocks, technical materials, slags containing less than 20% SiO2 and more than 20% CaO. An equation is derived to calculate the content of components determined in carbonate materials when using calibration by the concentration ratio. A method of ICP-AES with calibration by the concentration ratio is developed for determination of CaO (in the range of contents 20 – 100%), SiO2 (2.0 – 35%), Al2O3 (0.1 – 30%), MgO (0.1 – 20%), Fe2O3 (0.5 – 40%), Na2O (0.1 – 15%), K2O (0.1 – 5%), P2O5 (0.001 – 2%), MnO (0.01 – 2%), TiO2 (0.01 – 2.0%) in various carbonate materials. Acid decomposition of the samples in closed vessels heated in a HotBlock 200 system is proposed. Correctness of the procedure is confirmed in analysis of standard samples of rocks. The developed procedure was used during the interlaboratory analysis of the standard sample of slag SH17 produced by ZAO ISO (Yekaterinburg, Russia).

Sign in / Sign up

Export Citation Format

Share Document