PEG/PPG-PDMS-Adamantane-Based Crosslinked Terpolymer Using the ROMP Technique to Prepare a Highly Permeable and CO2-Selective Polymer Membrane

In this study, precursor molecules based on PEG/PPG and polydimethylsiloxane (PDMS), both widely used rubbery polymers, were copolymerized with bulky adamantane into copolymer membranes. Ring-opening metathesis polymerization (ROMP) was employed during the polymerization process to create a structure with both ends crosslinked. The precursor molecules and corresponding polymer membranes were characterized using various analytical methods. The polymer membranes were fabricated using different compositions of PDMS and adamantane, to determine how the network structure affected their gas separation performance. PEG/PPG, in which CO2 is highly soluble, was copolymerized with PDMS, which has high permeability, and adamantane, which controlled the crosslinking density with a rigid and bulky structure. It was confirmed that the resulting crosslinked polymer membranes exhibited high solubility and diffusivity for CO2. Further, their crosslinked structure using ROMP technique made it possible to form good films. The membranes fabricated in the present study exhibited excellent performance, i.e., CO2 permeability of up to 514.5 Barrer and CO2/N2 selectivity of 50.9.

Download Full-text

The spirobichroman-based polyimides with different side groups: from structure–property relationships to chain packing and gas transport performance

RSC Advances ◽

10.1039/d0ra10113c ◽

2021 ◽

Vol 11 (9) ◽

pp. 5086-5095

Author(s):

Shuli Wang ◽

Xiaohua Tong ◽

Chunbo Wang ◽

Xiaocui Han ◽

Sizhuo Jin ◽

...

Keyword(s):

Dihedral Angle ◽

Gas Separation ◽

Gas Transport ◽

Critical Role ◽

Polymer Membranes ◽

Separation Performance ◽

Structure Property ◽

Chain Packing ◽

Structure Property Relationships ◽

Gas Separation Performance

Effect of substituents on the dihedral angle and chain packing plays a critical role in the enhancement in the gas separation performance of polymer membranes.

Download Full-text

High pressure gas separation performance of mixed-matrix polymer membranes containing mesoporous Fe(BTC)

Journal of Membrane Science ◽

10.1016/j.memsci.2014.02.009 ◽

2014 ◽

Vol 459 ◽

pp. 33-44 ◽

Cited By ~ 102

Author(s):

Salman Shahid ◽

Kitty Nijmeijer

Keyword(s):

High Pressure ◽

Gas Separation ◽

Polymer Membranes ◽

Separation Performance ◽

Mixed Matrix ◽

Matrix Polymer ◽

Gas Separation Performance

Download Full-text

Hyperaging Tuning of a Carbon Molecular‐Sieve Hollow Fiber Membrane with Extraordinary Gas‐Separation Performance and Stability

Angewandte Chemie International Edition ◽

10.1002/anie.201904913 ◽

2019 ◽

Vol 58 (34) ◽

pp. 11700-11703 ◽

Cited By ~ 9

Author(s):

Wulin Qiu ◽

Justin Vaughn ◽

Gongping Liu ◽

Liren Xu ◽

Mark Brayden ◽

...

Keyword(s):

Gas Separation ◽

Hollow Fiber ◽

Molecular Sieve ◽

Hollow Fiber Membrane ◽

Separation Performance ◽

Fiber Membrane ◽

Carbon Molecular Sieve ◽

Gas Separation Performance

Download Full-text

3D Metal–Organic Frameworks Based on Co(II) and Bithiophendicarboxylate: Synthesis, Crystal Structures, Gas Adsorption, and Magnetic Properties

Molecules ◽

10.3390/molecules26051269 ◽

2021 ◽

Vol 26 (5) ◽

pp. 1269

Author(s):

Vadim A. Dubskikh ◽

Anna A. Lysova ◽

Denis G. Samsonenko ◽

Alexander N. Lavrov ◽

Konstantin A. Kovalenko ◽

...

Keyword(s):

Room Temperature ◽

Gas Adsorption ◽

Magnetic Moments ◽

Bet Surface Area ◽

Separation Performance ◽

Bridging Ligands ◽

Magnetization Data ◽

Metal Organic ◽

Ch4 Adsorption ◽

Gas Separation Performance

Three new 3D metal-organic porous frameworks based on Co(II) and 2,2′-bithiophen-5,5′-dicarboxylate (btdc2−) [Co3(btdc)3(bpy)2]·4DMF, 1; [Co3(btdc)3(pz)(dmf)2]·4DMF·1.5H2O, 2; [Co3(btdc)3(dmf)4]∙2DMF∙2H2O, 3 (bpy = 2,2′-bipyridyl, pz = pyrazine, dmf = N,N-dimethylformamide) were synthesized and structurally characterized. All compounds share the same trinuclear carboxylate building units {Co3(RCOO)6}, connected either by btdc2– ligands (1, 3) or by both btdc2– and pz bridging ligands (2). The permanent porosity of 1 was confirmed by N2, O2, CO, CO2, CH4 adsorption measurements at various temperatures (77 K, 273 K, 298 K), resulted in BET surface area 667 m2⋅g−1 and promising gas separation performance with selectivity factors up to 35.7 for CO2/N2, 45.4 for CO2/O2, 20.8 for CO2/CO, and 4.8 for CO2/CH4. The molar magnetic susceptibilities χp(T) were measured for 1 and 2 in the temperature range 1.77–330 K at magnetic fields up to 10 kOe. The room-temperature values of the effective magnetic moments for compounds 1 and 2 are μeff (300 K) ≈ 4.93 μB. The obtained results confirm the mainly paramagnetic nature of both compounds with some antiferromagnetic interactions at low-temperatures T < 20 K in 2 between the Co(II) cations separated by short pz linkers. Similar conclusions were also derived from the field-depending magnetization data of 1 and 2.

Download Full-text

Design and Gas Separation Performance of Imidazolium Poly(ILs) Containing Multivalent Imidazolium Fillers and Crosslinking Agents

Polymers ◽

10.3390/polym13091388 ◽

2021 ◽

Vol 13 (9) ◽

pp. 1388

Author(s):

Kathryn E. O’Harra ◽

Emily M. DeVriese ◽

Erika M. Turflinger ◽

Danielle M. Noll ◽

Jason E. Bara

Keyword(s):

Small Molecules ◽

Crosslinking Agent ◽

Gas Permeation ◽

Polymeric Matrix ◽

Separation Performance ◽

Ionic Polymers ◽

Co2 Solubility ◽

Imidazolium Cations ◽

Crosslinking Agents ◽

Gas Separation Performance

This work introduces a series of vinyl-imidazolium-based polyelectrolyte composites, which were structurally modified via impregnation with multivalent imidazolium-benzene ionic liquids (ILs) or crosslinked with novel cationic crosslinkers which possess internal imidazolium cations and vinylimidazolium cations at the periphery. A set of eight [C4vim][Tf2N]-based membranes were prepared via UV-initiated free radical polymerization, including four composites containing di-, tri-, tetra-, and hexa-imidazolium benzene ILs and four crosslinked derivatives which utilized tri- and tetra- vinylimidazolium benzene crosslinking agents. Structural and functional characterizations were performed, and pure gas permeation data were collected to better understand the effects of “free” ILs dispersed in the polymeric matrix versus integrated ionic crosslinks on the transport behaviors of these thin films. These imidazolium PIL:IL composites exhibited moderately high CO2 permeabilities (~20–40 Barrer), a 4–7× increase relative to corresponding neat PIL, with excellent selectivities against N2 or CH4. The addition of imidazolium-benzene fillers with increased imidazolium content were shown to correspondingly enhance CO2 solubility (di- < tri- < tetra- < hexa-), with the [C4vim][Tf2N]: [Hexa(Im+)Benz ][Tf2N] composite showing the highest CO2 permeability (PCO2 = 38.4 Barrer), while maintaining modest selectivities (αCO2/CH4 = 20.2, αCO2/N2 = 23.6). Additionally, these metrics were similarly improved with the integration of more ionic content bonded to the polymeric matrix; increased PCO2 with increased wt% of the tri- and tetra-vinylimidazolium benzene crosslinking agent was observed. This study demonstrates the intriguing interactions and effects of ionic additives or crosslinkers within a PIL matrix, revealing the potential for the tuning of the properties and transport behaviors of ionic polymers using ionic liquid-inspired small molecules.

Download Full-text