The Effect of Sulfated Zirconia and Zirconium Phosphate Nanocomposite Membranes on Fuel-Cell Efficiency

To investigate the effect of acidic nanoparticles on proton conductivity, permeability, and fuel-cell performance, a commercial Nafion® 117 membrane was impregnated with zirconium phosphates (ZrP) and sulfated zirconium (S-ZrO2) nanoparticles. As they are more stable than other solid superacids, sulfated metal oxides have been the subject of intensive research. Meanwhile, hydrophilic, proton-conducting inorganic acids such as zirconium phosphate (ZrP) have been used to modify the Nafion® membrane due to their hydrophilic nature, proton-conducting material, very low toxicity, low cost, and stability in a hydrogen/oxygen atmosphere. A tensile test, water uptake, methanol crossover, Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermal gravimetric analysis (TGA), and scanning electron microscopy (SEM) were used to assess the capacity of nanocomposite membranes to function in a fuel cell. The modified Nafion® membrane had a higher water uptake and a lower water content angle than the commercial Nafion® 117 membrane, indicating that it has a greater impact on conductivity. Under strain rates of 40, 30, and 20 mm/min, the nanocomposite membranes demonstrated more stable thermal deterioration and higher mechanical strength, which offers tremendous promise for fuel-cell applications. When compared to 0.113 S/cm and 0.013 S/cm, respectively, of commercial Nafion® 117 and Nafion® ZrP membranes, the modified Nafion® membrane with ammonia sulphate acid had the highest proton conductivity of 7.891 S/cm. When tested using a direct single-cell methanol fuel cell, it also had the highest power density of 183 mW cm−2 which is better than commercial Nafion® 117 and Nafion® ZrP membranes.

Download Full-text

The Effect of Sulfated Zirconia and Zirconium Phosphate Nanocomposite Membranes on Fuel Cell Efficiency

10.20944/preprints202109.0018.v1 ◽

2021 ◽

Author(s):

Rudzani Sigwadi ◽

Touhami Mokrani ◽

Phumlani Msomi ◽

Fulufhelo Nemavhola

Keyword(s):

Fuel Cell ◽

Proton Conductivity ◽

Water Uptake ◽

Zro2 Nanoparticles ◽

Gravimetric Analysis ◽

X Ray Diffraction ◽

Nanocomposite Membranes ◽

Fuel Cell Performance ◽

Cell Efficiency ◽

Thermal Deterioration

To investigate the effect of acidic nanoparticles on proton conductivity, permeability and fuel cell performance, a commercial Nafion® 117 membrane was impregnated with zirconium phosphates (ZrP) and sulfated zirconium (S-ZrO2) nanoparticles. The tensile test, water uptake, methanol crossover, Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Thermal gravimetric analysis (TGA) and Scanning Electron Microscopy (SEM) were used to assess the ca-pacity of nanocomposite membrane to function in a fuel cell. The modified Nafion® membrane obtained the higher water uptake and a lower water content angle than the commercial Nafion® 117 membrane, indicating that it has a greater impact on conductivity. Under strain rates of 40, 30 and 20 mm/min, the nanocomposite membranes demonstrate more stable thermal deterioration and higher mechanical strength, which offers tremendous promise for fuel cell applications. When compared to 0.113 S/cm and 0.013 S/cm, respectively, of commercial Nafion® 117 and Nafion® ZrP membranes, the modified Nafion® membrane with ammonia sulphate acid had the highest proton conductivity of 7.891 S/cm. When tested using a direct single cell methanol fuel cell, it had the highest power density of 183 m. cm-2 which is better than commercial Nafion® 117 and Nafion® ZrP membranes.

Download Full-text

Effect of Modified Nanoclay Composite on Blended PVDF/PEG Electrolyte Membranes for Fuel Cell Applications

International Journal of Nanoscience ◽

10.1142/s0219581x17600420 ◽

2018 ◽

Vol 17 (03) ◽

pp. 1760042 ◽

Cited By ~ 1

Author(s):

P. Bahavan Palani ◽

K. Sainul Abidin ◽

R. Kannan ◽

S. Rajashabala

Keyword(s):

Fuel Cell ◽

Water Uptake ◽

Electrochemical Impedance ◽

Thermo Gravimetric Analysis ◽

Composite Membranes ◽

Proton Exchange ◽

Chromatographic Technique ◽

Gravimetric Analysis ◽

Additive Concentration ◽

Nanocomposite Membranes

This research work describes the fabrication of polymer blend nanocomposite membranes using the solution casting method. These membranes were fabricated with Poly (Vinylidene Fluoride) (PVdF) as host, Poly (Ethylene Glycol) (PEG) in steps of 2[Formula: see text]wt.% as blending polymer and Montmorillonite (MMT) nanoclay particles in steps of 3[Formula: see text]wt.% which were used as received. The protonated MMT was synthesized through an ion exchange process with column chromatographic technique. The prepared membrane’s performance was investigated using different characterization techniques of Thermo Gravimetric Analysis (TGA), Fourier Transform Infrared Spectroscopy (FT-IR), X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), water uptake, IEC and electrochemical impedance spectroscopy. Thermal stability was decreased while adding PEG into PVDF but it is controlled with the addition of MMT on PVDF/PEG blend matrix. Moreover, It is noticed that, the increase of water uptake, IEC by the increasing additive concentration of PEG and MMT. XRD studies reveal the increased amorphous phase with uniform exfoliation of nanoclay particles. The highest proton conductivity value of 0.127[Formula: see text]S cm[Formula: see text] is obtained with 9[Formula: see text]wt.% of MMT in the PVdF/PEG/MMT composite membranes at room temperature with 100% Relative Humid (RH) condition and 10 V.% of sulfonation. The blended nanocomposite membranes fulfill the requirements of proton exchange membrane for fuel cell application.

Download Full-text

Preparation and Characterization of a Novel Sulfonated Titanium Oxide Incorporated Chitosan Nanocomposite Membranes for Fuel Cell Application

Membranes ◽

10.3390/membranes11060450 ◽

2021 ◽

Vol 11 (6) ◽

pp. 450

Author(s):

Saad Ahmed ◽

Tasleem Arshad ◽

Amir Zada ◽

Annum Afzal ◽

Muhammad Khan ◽

...

Keyword(s):

Fuel Cell ◽

Proton Conductivity ◽

Proton Exchange Membrane ◽

Mechanical Stability ◽

Exchange Capacity ◽

Proton Exchange ◽

Nanocomposite Membranes ◽

Nano Tio2 ◽

Proton Conducting ◽

Exchange Membrane

In this study, nano-TiO2 sulfonated with 1,3-propane sultone (STiO2) was incorporated into the chitosan (CS) matrix for the preparation of CS/STiO2 nanocomposite membranes for fuel cell applications. The grafting of sulfonic acid (–SO3H) groups was confirmed by Fourier transform infrared spectroscopy, thermogravimetric analysis and energy-dispersive X-ray spectroscopy. The physicochemical properties of these prepared membranes, such as water uptake, swelling ratio, thermal and mechanical stability, ion exchange capacity and proton conductivity, were determined. The proton conducting groups on the surface of nano-TiO2 can form continuous proton conducting pathways along the CS/STiO2 interface and thus improve the proton conductivity of CS/STiO2 nanocomposite membranes. The CS/STiO2 nanocomposite membrane with 5 wt% of sulfonated TiO2 showed a proton conductivity (0.035 S·cm−1) equal to that of commercial Nafion 117 membrane (0.033 S·cm−1). The thermal and mechanical stability of the nanocomposite membranes were improved because the interfacial interaction between the -SO3H group of TiO2 and the –NH2 group of CS can restrict the mobility of CS chains to enhance the thermal and mechanical stability of the nanocomposite membranes. These CS/STiO2 nanocomposite membranes have promising applications in proton exchange membrane fuel cells.

Download Full-text