scholarly journals Retrieval of Water Cloud Optical and Microphysical Properties from Combined Multiwavelength Lidar and Radar Data

2021 ◽  
Vol 13 (21) ◽  
pp. 4396
Author(s):  
Yinchao Zhang ◽  
Su Chen ◽  
Wangshu Tan ◽  
Siying Chen ◽  
He Chen ◽  
...  
Keyword(s):  
Size Distribution ◽  
Droplet Size ◽  
Weather Prediction ◽  
Cloud Droplet ◽  
Droplet Size Distribution ◽  
Lookup Table ◽  
Microphysical Properties ◽  
Cloud Droplet Size Distribution ◽  
Water Cloud ◽  
532 Nm

The remote sensing of water clouds is useful for studying their spatial and temporal variations and constraining physical processes in climate and weather prediction models. However, radar-only detection provides inadequate information for the cloud droplet size distribution. Here, we propose a novel lookup-table method, which combines lidar (1064, 532 nm) and radar (8.6 mm) to retrieve profiles of cloud optical (backscatter coefficient and extinction coefficient) and microphysical properties (effective diameter and liquid water content). Through the iteration of the extinction-to-backscatter ratio, more continuous cloud optical characteristics can be obtained. Sensitivity analysis shows that a 10% error of the lidar constant will lead to a retrieval error of up to 30%. The algorithm performed precise capture of the ideal cloud signal at a specific height and at full height and the maximum relative error of the backscatter coefficients at 1064 nm and 532 nm were 6% and 4%, respectively. With the application of the algorithm in the two observation cases on single or multiple cloud layers, the results indicate that the microphysical properties mostly agree with the empirical radar measurements but are slightly different when larger particles cause signal changes of different extents. Consequently, the synergetic algorithm is capable of computing the cloud droplet size distribution. It provides continuous profiles of cloud optical properties and captures cloud microphysical properties well for water cloud studies.

scholarly journals Cloud heterogeneity on cloud and aerosol above cloud properties retrieved from simulated total and polarized reflectances

2018 ◽  
Vol 11 (6) ◽  
pp. 3627-3643 ◽  
Author(s):  
Céline Cornet ◽  
Laurent C.-Labonnote ◽  
Fabien Waquet ◽  
Frédéric Szczap ◽  
Lucia Deaconu ◽  
...  
Keyword(s):  
Size Distribution ◽  
Droplet Size ◽  
Optical Thickness ◽  
Incidence Angle ◽  
Cloud Droplet ◽  
Droplet Size Distribution ◽  
Cloud Droplet Size Distribution ◽  
Fractional Cloud ◽  
Cloud Optical Thickness ◽  
Heterogeneity Effects

Abstract. Simulations of total and polarized cloud reflectance angular signatures such as the ones measured by the multi-angular and polarized radiometer POLDER3/PARASOL are used to evaluate cloud heterogeneity effects on cloud parameter retrievals. Effects on optical thickness, albedo, effective radius and variance of the cloud droplet size distribution and aerosol parameters above cloud are analyzed. Three different clouds that have the same mean optical thicknesses were generated: the first with a flat top, the second with a bumpy top and the last with a fractional cloud cover. At small scale (50 m), for oblique solar incidence, the illumination effects lead to higher total but also polarized reflectances. The polarized reflectances even reach values that cannot be predicted by the 1-D homogeneous cloud assumption. At the POLDER scale (7 km × 7 km), the angular signature is modified by a combination of the plane–parallel bias and the shadowing and illumination effects. In order to quantify effects of cloud heterogeneity on operational products, we ran the POLDER operational algorithms on the simulated reflectances to retrieve the cloud optical thickness and albedo. Results show that the cloud optical thickness is greatly affected: biases can reach up to −70, −50 or +40 % for backward, nadir and forward viewing directions, respectively. Concerning the albedo of the cloudy scenes, the errors are smaller, between −4.7 % for solar incidence angle of 20∘ and up to about +8 % for solar incidence angle of 60∘. We also tested the heterogeneity effects on new algorithms that allow retrieving cloud droplet size distribution and cloud top pressures and also aerosol above clouds. Contrary to the bi-spectral method, the retrieved cloud droplet size parameters are not significantly affected by the cloud heterogeneity, which proves to be a great advantage of using polarized measurements. However, the cloud top pressure obtained from molecular scattering in the forward direction can be biased up to about 60 hPa (around 550 m). Concerning the aerosol optical thickness (AOT) above cloud, the results are different depending on the available angular information. Above the fractional cloud, when only side scattering angles between 100 and 130∘ are available, the AOT is underestimated because of the plane–parallel bias. However, for solar zenith angle of 60∘ it is overestimated because the polarized reflectances are increased in forward directions.

scholarly journals Simultaneous retrieval of aerosol and cloud properties during the MILAGRO field campaign

2011 ◽  
Vol 11 (13) ◽  
pp. 6245-6263 ◽  
Author(s):  
K. Knobelspiesse ◽  
B. Cairns ◽  
J. Redemann ◽  
R. W. Bergstrom ◽  
A. Stohl
Keyword(s):  
Optical Properties ◽  
Size Distribution ◽  
Aerosol Optical Depth ◽  
Optical Depth ◽  
Droplet Size ◽  
Cloud Droplet ◽  
Droplet Size Distribution ◽  
Cloud Droplet Size Distribution ◽  
Distribution Parameters ◽  
Aerosol Properties

Abstract. Estimation of Direct Climate Forcing (DCF) due to aerosols in cloudy areas has historically been a difficult task, mainly because of a lack of appropriate measurements. Recently, passive remote sensing instruments have been developed that have the potential to retrieve both cloud and aerosol properties using polarimetric, multiple view angle, and multi spectral observations, and therefore determine DCF from aerosols above clouds. One such instrument is the Research Scanning Polarimeter (RSP), an airborne prototype of a sensor on the NASA Glory satellite, which unfortunately failed to reach orbit during its launch in March of 2011. In the spring of 2006, the RSP was deployed on an aircraft based in Veracruz, Mexico, as part of the Megacity Initiative: Local and Global Research Observations (MILAGRO) field campaign. On 13 March, the RSP over flew an aerosol layer lofted above a low altitude marine stratocumulus cloud close to shore in the Gulf of Mexico. We investigate the feasibility of retrieving aerosol properties over clouds using these data. Our approach is to first determine cloud droplet size distribution using the angular location of the cloud bow and other features in the polarized reflectance. The selected cloud was then used in a multiple scattering radiative transfer model optimization to determine the aerosol optical properties and fine tune the cloud size distribution. In this scene, we were able to retrieve aerosol optical depth, the fine mode aerosol size distribution parameters and the cloud droplet size distribution parameters to a degree of accuracy required for climate modeling. This required assumptions about the aerosol vertical distribution and the optical properties of the coarse aerosol size mode. A sensitivity study was also performed to place this study in the context of future systematic scanning polarimeter observations, which found that the aerosol complex refractive index can also be observed accurately if the aerosol optical depth is larger than roughly 0.8 at a wavelength of (0.555 μm).

scholarly journals Cloud heterogeneity effects on cloud and aerosol above cloud properties retrieved from simulated total and polarized reflectances

2017 ◽  
Author(s):  
Céline Cornet ◽  
Laurent C-Labonnote ◽  
Frédéric Szczap ◽  
Lucia Deaconu ◽  
Fabien Waquet ◽  
...  
Keyword(s):  
Size Distribution ◽  
Droplet Size ◽  
Optical Thickness ◽  
Incidence Angle ◽  
Cloud Droplet ◽  
Droplet Size Distribution ◽  
Cloud Droplet Size Distribution ◽  
Fractional Cloud ◽  
Cloud Optical Thickness ◽  
Heterogeneity Effects

Abstract. Simulations of total and polarized cloud reflectance angular signatures such as the ones measured by the multi-angular and polarized radiometer POLDER3/PARASOL are used to evaluate cloud heterogeneity effects on cloud parameter retrievals. Effects on optical thickness, cloud albedo, effective radius and variance of the cloud droplet size distribution and aerosol above cloud optical thickness are analyzed. Three different clouds having the same mean optical thicknesses were generated: the first one with a flat top, the second one with a bumpy top and the last one with a fractional cloud cover. At small scale (50 m), for oblique solar incidence, the illumination effects lead to higher total but also polarized reflectances. The polarized reflectances even reach values that cannot be predicted by the 1D homogeneous cloud assumption. At the POLDER scale (7 km × 7 km), the angular signature is modified by a combination of the plane-parallel bias and the shadowing and illumination effects. In order to quantify effects of cloud heterogeneity on operational products, we ran the POLDER operational algorithms on the simulated reflectances to retrieve the cloud optical thickness and albedo. Results show that the cloud optical thickness is greatly affected: biases can reach up to −70 %, −50 % or +40 % for backward, nadir and forward viewing directions respectively. Concerning the cloud albedo, the errors are smaller, between −4.7 % for solar incidence angle of 20° and up to about 8 % for solar incidence angle of 60°. We also tested the heterogeneity effects on new algorithms that allow retrieving cloud droplet size distribution and cloud top pressures and also aerosol above clouds. Contrarily to the bi-spectral method, the retrieved cloud droplet size parameters are not significantly affected by the cloud heterogeneity, which proves to be a great advantage of using polarized measurements. However the cloud top pressure obtained from molecular scattering in the forward direction can be biased up to 120 hPa (around 1 km). Concerning the aerosol optical thickness (AOT) above cloud, the results are different depending on the available angular information. Above the fractional cloud, when only side scattering angles are available, the AOT can be underestimated because of the plane-parallel bias. For solar zenith angle of 60°, on contrary, it is overestimated because the polarized reflectances are increased in forward directions.

scholarly journals Simultaneous retrieval of aerosol and cloud properties during the MILAGRO field campaign

2011 ◽  
Vol 11 (2) ◽  
pp. 6363-6413 ◽  
Author(s):  
K. Knobelspiesse ◽  
B. Cairns ◽  
J. Redemann ◽  
R. W. Bergstrom ◽  
A. Stohl
Keyword(s):  
Optical Properties ◽  
Size Distribution ◽  
Aerosol Optical Depth ◽  
Optical Depth ◽  
Droplet Size ◽  
Cloud Droplet ◽  
Droplet Size Distribution ◽  
Field Campaign ◽  
Cloud Droplet Size Distribution ◽  
Aerosol Properties

Abstract. Estimation of Direct Climate Forcing (DCF) due to aerosols in cloudy areas has historically been a difficult task, mainly because of a lack of appropriate measurements. The Aerosol Polarimetry Sensor (APS), on the upcoming NASA Glory mission, has the potential to retrieve both cloud and aerosol properties because of its polarimetric, multiple view angle, and multi spectral observations. The APS airborne prototype is the Research Scanning Polarimeter (RSP), which has similar characteristics and can be used to demonstrate APS capabilities. In the spring of 2006, the RSP was deployed on an aircraft based in Veracruz, Mexico, as part of the Megacity Initiative: Local and Global Research Observations (MILAGRO) field campaign. On March 13th, the RSP over flew an aerosol layer lofted above a low altitude marine stratocumulus cloud close to shore in the Gulf of Mexico. We investigate the feasibility of retrieving aerosol properties over clouds using these data. Our approach is to first determine cloud droplet size distribution using the angular location of the cloud bow and other features in the polarized reflectance. The selected cloud was then used in a multiple scattering radiative transfer model optimization to determine the aerosol optical properties and fine tune the cloud size distribution. In this scene, we were able to retrieve aerosol optical depth, the fine mode aerosol size distribution and the cloud droplet size distribution to a degree of accuracy required for climate modeling. This required assumptions about the aerosol vertical distribution and the optical properties of the coarse aerosol size mode. A sensitivity study was also performed to place this case study in the context of the potential for future systematic APS observations of this kind, which found that the aerosol complex refractive index can also be observed accurately if the aerosol optical depth is larger than roughly 0.8 at a wavelength of 0.555 μm.

An improved algorithm of cloud droplet size distribution from POLDER polarized measurements

2019 ◽  
Vol 228 ◽  
pp. 61-74 ◽  
Author(s):  
Huazhe Shang ◽  
Husi Letu ◽  
François-Marie Bréon ◽  
Jérôme Riedi ◽  
Run Ma ◽  
...  
Keyword(s):  
Size Distribution ◽  
Droplet Size ◽  
Cloud Droplet ◽  
Droplet Size Distribution ◽  
Cloud Droplet Size Distribution ◽  
Improved Algorithm

Cloud Droplet Size Distributions from Observations of Glory and Cloudbow during the EUREC4A Campaign

2020 ◽  
Author(s):  
Veronika Pörtge ◽  
Tobias Kölling ◽  
Tobias Zinner ◽  
Linda Forster ◽  
Bernhard Mayer
Keyword(s):  
Size Distribution ◽  
Droplet Size ◽  
Cloud Droplet ◽  
Droplet Size Distribution ◽  
Cloud Microphysics ◽  
Small Scale ◽  
Remote Sensing Technique ◽  
Cloud Droplet Size Distribution ◽  
Cloud Radiative Effect ◽  
Spherical Droplets

<p>The cloud droplet size distribution determines the evolution of clouds and their impact on weather and climate. First, droplet size determines<br>the cloud radiative effect. Second, evolution of clouds and formation of precipitation are determined by droplet size and the shape of the size distribution. Therefore, measurements of the size distribution are important to further our understanding of clouds and their role in the earth system. We present a remote sensing technique for droplet size and width of the size distribution based on polarized observations of the glory and the cloudbow.<br>Glory and cloudbow are caused by backscattering of sunlight by spherical droplets in liquid clouds. This backscattering results in colorful concentric rings surrounding the observer’s shadow; the formation is described quantitatively by Mie theory. The rings of the glory appear in an angular range of 170° – 180° scattering angle and the larger cloudbow rings in a range of about 130° – 160° . The angular radius of the rings is the most accurate and direct measure of the droplet size at cloud edge. In addition, the sharpness of the rings conveys information about the width of the droplet size distribution. The visibility of glory and cloudbow is significantly enhanced by the use of polarized observations which reduce the contribution of multiple scattering.<br>The specMACS sensor of LMU Munich has been upgraded recently by a polarization-sensitive wide-angle imager which was operated for the first time on the HALO aircraft during the EUREC4A campaign. The newly installed sensor offers a high spatial and temporal resolution, allowing to study small-scale variability of cloud microphysics at cloud top with a resolution of about 20 m. specMACS measurements and first retrieval results using the glory-cloudbow technique are presented.</p>

Sign in / Sign up

Export Citation Format

Share Document